Database "wabib": list

Show:    Current year  |  Switch to sorted list
:    year author title researchschool

wa0575 S. Tuijp, BO-opdracht: Modificatie cameraopstelling, Report no. wa0575, February, 1998.
wa0576 M. van Zutphen, Ontwerp van een translerende en roterende ECM-actuator, Report no. wa0576, February, 1998.
wa0577 M. Bosman, Design and realisation of a PM linear motordriven XY-table, Report no. wa0577, February, 1998.
wa0578 M. Maasland, Het nauwkeurig meten van de diameter van rubberen walsrollen, University of Twente, Report no. wa0578, March, 1998.
wa0579 J. Olde Benneker, 980013: Laserharden van C45, Report no. wa0579, February, 1998.
wa0580 M.F. Schneider, Laser cladding with powder, Report no. wa0580, March, 1998.
wa0581 J. Olde Benneker, 980015: Lasersnijden van kunststoffen, Report no. wa0581, March, 1998.
wa0582 M. van Zutphen, Implementatie en evaluatie van een cross jet t.b.v. het lasercladden, University of Twente, Report no. wa0582, April, 1998.
wa0583 J. Olde Benneker, 980020: Laserfrezen kunststoffen, Report no. wa0583, April, 1998.
wa0584 J. Olde Benneker, 980017: Lasersnijden van gevuld rubber, Report no. wa0584, April, 1998.
wa0585 J. Olde Benneker, 980018: Lasersnijden staal C37, Report no. wa0585, April, 1998.
wa0586 J.B. Jonker and R.G.K.M. Aarts, Modelling of flexible mechanisms and manipulators for control purposes, pp. 291-297 in Proceedings of the Fourth International Conference on Motion and Vibration Control, MoViC, Vol. 1, Ed. G. Schweitzer, R. Siegwart and P. Cattin (No ISBN or ISSN) Zürich, Switzerland, Institute of Robotics, ETH-Zürich, Augustus, 1998. EM.
wa0587 J. Olde Benneker, 980021: Laserfrezen catheter, Report no. wa0587, May, 1998.
wa0588 O. Brug, Force predictions of lenear induction motors, University of Twente, Report no. wa0588, June, 1998.
wa0589 J. Olde Benneker, 970009: Lasersnijden van papier t.b.v. de enveloppenfabricage, Report no. wa0589, June, 1998.
wa0590 J. Olde Benneker, 970058: Optimalisering lasersnijden HR-staal, Report no. wa0590, June, 1998. vertrouwelijk.
wa0591 H. Scholten, The development of an advanced workstation for controlled laser cleaning of paintings, University of Twente, Report no. wa0591, June, 1998. vertrouwelijk.
wa0592 R.G.K.M. Aarts and J.B. Jonker, SPACAR User Manual, version 2.0, Report no. wa0592, June, 1998.
wa0593 J. Smeltink, Impact behaviour of a resonant piezomotor, University of Twente, Report no. wa0593, June, 1998.
wa0594 M. Hoeksma, no title, University of Twente, Report no. wa0594, June, 1998.
wa0595 T. Zuiderveld, Ontwerp en realisatie van het CO2-laserbewerkingsstation WSD, University of Twente, Report no. wa0595, July, 1998.
wa0596 J. Olde Benneker, 970058: Optimalisering lasersnijden HR-staal, Report no. wa0596, June, 1998. vertrouwelijk.
wa0597 G.R.B.E. Römer, Eindrapportage IOP-metalen: Laserlegeren, Report no. wa0597, July, 1998.
wa0598 G. Smit, A coaxial powder nozzle for laser cladding, University of Twente, Report no. wa0598, July, 1998.
wa0599 W. Keijer, no title, University of Twente, Report no. wa0599, July, 1998.
wa0600 S. Helming, Ontwerp van een regeling en sensor t.b.v. krachtterugkoppeling in een micro manipulator, University of Twente, Report no. wa0600, July, 1998.
wa0601 J. Olde Benneker, 980021.2: Laserfrezen catheder (2), Report no. wa0601, July, 1998.
wa0602 L. Looijen, De Delta Piëzo Motor, University of Twente, Report no. wa0602, July, 1998. vertrouwelijk.
wa0603 K.A.J. de Graaff, The design and implementation of a multivariable controller for the laser alloying process, University of Twente, Report no. wa0603, August, 1998.
wa0604 J. Olde Benneker, 980024: Laserablatie van Al2O3, Report no. wa0604, July, 1998. vertrouwelijk.
wa0605 A.M. Baneke, Design and implementation fo a high bandwidth opto-mechanic system for laser beam manipulation, University of Twente, Report no. wa0605, August, 1998.
wa0606 J. Olde Benneker, 980029: Laserfezen van AlNi, Report no. wa0606, September, 1998.
wa0607 V. Shmukler, R.G.K.M. Aarts, Off-line determination of seam position for laser welding, Report no. wa0607, September, 1998.
wa0608 no author, no title, Report no. wa0608, 1998.
wa0609 X. van Mechelen, Force prdictions of a linear permanent magnet motor, University of Twente, Report no. wa0609, October, 1998.
wa0610 S.S.A. Tuijp, Het testen van een universele grijper, University of Twente, Report no. wa0610, October, 1998.
wa0611 J. Olde Benneker, 980026: Lasersnijden an gecoat papier, Report no. wa0611, October, 1998. vertrouwelijk.
wa0612 E.J. Bakker, Control system design of a fast and accurate manip. model, University of Twente, Report no. wa0612, November, 1998.
wa0613 E.J. Bakker, FAMM documentation, Report no. wa0613, December, 1998.
wa0614 M.W. Wilcke, Analysis to the origin of the viscous component in tubular linear induction motors, University of Twente, Report no. wa0614, December, 1998.
wa0615 W. Husslage, 980039: Lasercladden van cylinder t.b.v. "zuurgas" kwalificatie, Report no. wa0615, December, 1998. vertrouwelijk.
wa0616 W. Husslage, 980040: SCA rapport Laserharden, Report no. wa0616, December, 1998.
wa0617 W. Husslage, 980043: Lasercladden assen, Report no. wa0617, December, 1998.
wa0618 J. Meijer, 980023: Constructie vrijstroom afsluiter, Report no. wa0618, June, 1998.
wa0619 J. Olde Benneker, R. de Graaf, 980033: Lasersnijden koper-Epoxy combinatie, Report no. wa0619, November, 1998. vertrouwelijk.
wa0620 J. Wes, J. Olde Benneker, 980035: Lasersnijden verenstaal (RVS) producten, Report no. wa0620, November, 1998.
wa0621 W. Husslage, 980044: Laserondersteund verspanen, Report no. wa0621, December, 1998.
wa0622 N.E.T. Jansen, Toepassen van laser adjustment in constructies, University of Twente, Report no. wa0622, February, 1999. vertrouwelijk.
wa0623 M. Put, Optimal sturen van de nozzle bij lasersnijden + appendix, University of Twente, Report no. wa0623, February, 1999.
wa0624 J. Olde Benneker, Laserlassen met de CW Nd: YAG laser, Report no. wa0624, February, 1999.
wa0625 J. Olde Benneker, 990005: Baat Medical, Report no. wa0625, March, 1999.
wa0626 M.J. Mulder, Stageverslagen Maart-Juni, Report no. wa0626, March, 1999. stagiair.
wa0627 S. Zapf, Stageverslagen Maart-Juni, Report no. wa0627, March, 1999. stagiair.
wa0628 J. Olde Benneker, J. Wes, 990007: Lasersnijden van vezelversterkte kunststof, Report no. wa0628, March, 1999.
wa0629 J. Olde Benneker, J. Wes, 990006: Lasersnijden en -boren van Pyrexglas, Report no. wa0629, March, 1999.
wa0630 J. Olde Benneker, 990009: Laserboren van spenen, Report no. wa0630, March, 1999.
wa0631 J. Olde Benneker, 990008: Lasergraveren van St37 en AlMg3 met behulp van de gepulste Nd:YAG laser, Report no. wa0631, April, 1999.
wa0632 S. Postma, Laser welding modeling and control (literatuur review), Report no. wa0632, April, 1999.
wa0633 M. Bosman, 990003-1: Laserlassen van industriële martensitisch roestvaststalen messen met een CW Nd:YAG laser, Report no. wa0633, April, 1999.
wa0634 R.A.J. van Doorn, The FAMM laser gun, University of Twente, Report no. wa0634, June, 1999.
wa0635 L. Talen, Seam tracking procedures for robot supported laser welding, University of Twente, Report no. wa0635, June, 1999.
wa0636 J. Olde Benneker, 990011: Gaatjes in PET op staal, Report no. wa0636, May, 1999.
wa0637 R.G.K.M. Aarts and J.B. Jonker, SPACAR User Manual, version 3.0, Report no. wa0637, May, 1999.
wa0638 S.T. Homminga, Ontwerp van een sorteermachine voor glazen buisjes, University of Twente, Report no. wa0638, June, 1999.
wa0639 K. Hermkens, Stageverslag, Report no. wa0639, June, 1999. stagiair.
wa0640 J. Olde Benneker, 990018: Lasersnijden van Al2O3, Report no. wa0640, June, 1999.
wa0641 J.B. Jonker and R.G.K.M. Aarts, A superposition method for dynamic analysis and simulation of flexible manipulators, pp. 601-615 in Euromech Colloquium 404 on Advances in Computational Multibody Dynamics (No ISBN or ISSN) Lisbao, Portugal, September, 20-23, 1999.
wa0642 R.J. Bijlsma, Process identification of Nd:YAG laser welding, University of Twente, Report no. wa0642, July, 1999.
wa0643 J. Olde Benneker, 980027.2: Optimalisering lasersnijden staal (II), Report no. wa0643, July, 1999. vertrouwelijk.
wa0644 J. Olde Benneker, Materiaalbewerking met lasers - Factorial Design, Report no. wa0644, September, 1999.
wa0645 W. Husslage, LB99-30: Oriënterend laserlassen met CW Nd:YAG-lasers, Report no. wa0645, September, 1999.
wa0646 W. Husslage, Laseroppervlaktebehandeling met CW Nd:YAG-lasers, Report no. wa0646, September, 1999.
wa0647 M. Hermans, The design and implementation of a seam tracking sensor, University of Twente, Report no. wa0647, September, 1999.
wa0648 I.A. Kerp, Implementation and control of a screw spindle actuator for laserfocus manipulation, Report no. wa0648, September, 1999.
wa0649 E.J. Bakker, I.A. Kerp, FAMM documentation, Report no. wa0649, September, 1999.
wa0650 J. Olde Benneker, 980027.1: Optimalisering lasersnijden (II), Report no. wa0650, June, 1999. vertrouwelijk.
wa0651 W. Husslage, LB99-29: Laserlassen van metalen spiraal op buis, Report no. wa0651, May, 1999.
wa0652 R.R.Waiboer, A superposition method for the dynamic analysis and simulation of flexible mechanisms and manipulators, Report no. wa0652, October, 1999.
wa0653 J. Olde Benneker, 980027.3: Optimalisering lasersnijden staal (II), Report no. wa0653, October, 1999. vertrouwelijk.
wa0654 J. Olde Benneker, 990011.2: Gaatjes in PET op staal (II), Report no. wa0654, August, 1999.
wa0655 J. Olde Benneker, 990018.2: Lasersnijden van Al2O3 (II), Report no. wa0655, August, 1999.
wa0656 S. Zapf, 990018: Lasersnijden van Al2O3, Report no. wa0656, June, 1999.
wa0657 J. Olde Benneker, E. Jobse, P. Bloemen, 980036: Laserboren RVS en Messing, Report no. wa0657, October, 1999.
wa0658 B. van Leeuwen, Design and Control of an electromechanical CVT actuator, University of Twente, Report no. wa0658, November, 1999. vertrouwelijk.
wa0659 J. Olde Benneker, 990030: Lasersnijden gelamineerd deeg, Report no. wa0659, November, 1999.
wa0660 J. Olde Benneker, J. Jobse, P. Bloemen, 990037: Lasersnijden van Al2O3 (III), Report no. wa0660, October, 1999.
wa0661 W. Husslage, Vermogens- en bundelmetingen van een 2,8kW CO2-lasersysteem van Metaveld Wijchen BV, Report no. wa0661, November, 1999.
wa0662 B. de Wit, Deflectometrie, University of Twente, Report no. wa0662, November, 1999.
wa0663 J. Wes, Meeting van de bundelform van de OPL en de Rofin-Sinar CO2-laser, Report no. wa0663, November, 1999.
wa0664 J. Wes, Graveren van F6PO4 met de CO2-laser, Report no. wa0664, November, 1999.
wa0665 J. Meijer, P.Bant, Examples of commercialising entrepreneurship at knowledge the University of Twente, pp. n.v.t. in unknown (ISBN unknown) unknown, December, 1999.
wa0666 G.R.B.E. Römer, Bundelkarakterisatie Held-lasersysteem van ATB te Bunschoten, Report no. wa0666, December, 1999.
wa0667 G.R.B.E. Römer, STW-aanvraag: Naadvolg- en inspectiesysteem voor het robotondersteund laserlassen, Report no. wa0667, December, 1999.
wa0668 J. Olde Benneker, 990042.1: Procedure ter bepaling lasersnijdbaarheid van staal (I), Report no. wa0668, December, 1999. vertrouwelijk.
wa0669 J. Olde Benneker, 990043: Lasersnijden St37 met de Oerlikon OPL3500 in TEM00 mode, Report no. wa0669, December, 1999.
wa0670 J. Olde Benneker, E. Jobse, P. Bloemen, 990032: Laserablatie van diamant, Report no. wa0670, December, 1999.
wa0671 T. Klaver, Lasercontrole HAAS, Report no. wa0671, December, 1999.
wa0672 J. Olde Benneker, J. Wes, 990027: Snijden van St37 buis met behulp van de CO2-laser, Report no. wa0672, December, 1999.
wa0673 J. Olde Benneker, Evaluatie van de Panasonic VR008AE robot voor het laserlassen (PMP-rapport nr.: GA00-16), Report no. wa0673, December, 1999.
wa0674 Marcel Fredrik Schneider, Laser cladding with powder, effect of some machining parameters on clad properties, 90-365-1098-8, University of Twente, March 19, 1998.
wa0675 D.F. de Lange, Meetrapport: Meting van focus en bundel van de 2 kW Haas laser met de Haas optiek, Report no. wa0675, January, 2000.
wa0676 J. Olde Benneker and G.J.W. Wes, Laserlassen van een aluminium plaatprodukt met behulp van een robot. BvM/PMP project: Nieuwe technieken voor laserbewerken en laserlassen, Report no. wa0676, January, 2000.
wa0677 W. Husslage, LB99-32: Orienterend lasersnijden met CW Nd:YAG-laser, Report no. wa0677, January, 2000.
wa0678 A.M. Heijnis, Het ontwerp van een energiezuinig schakelmechanisme, Report no. wa0678, February, 2000.
wa0679 Gert-Willem R.B.E. Römer and Roelof F. de Graaf, Direct calculation of optimized laser power density profiles for laser heating, pp. pp. 1-10 in Proceedings of the 15th Meeting on Modelling of Material Processing with Lasers (M4PL15) (No ISBN or ISSN) Igls/Innsbruck, Austria, January 19-21, 2000.
wa0680 J. Eindhoven, E. Jobse, P. Bloemen, J. Olde Benneker, 000001: laserablatie van aluminium, Report no. wa0680, February, 2000.
wa0681 P.H.D. Broekmans, Ontwerp van een secundaire inlaatklep, Report no. wa0681, February, 2000.
wa0682 J. Olde Benneker, Laserlassen van verschillende aluminiumlegeringen en lasnaadvormen, GA00-17, Report no. wa0682, February, 2000. PMP-rapport.
wa0683 J. Olde Benneker, Toelaatbare toleranties bij het laserlassen van aluminiumlegeringen, GA00-18, Report no. wa0683, February, 2000. PMP-rapport.
wa0684 M.C. Schouten, Onderbreken van de bewegingscyclus van nok aangedreven mechanismen, Report no. wa0684, March, 2000.
wa0685 G.R.B.E. Römer, J. Meijer, Inverse calculation of power density for laser surface treatment, pp. pp. 135-138 in 50th CIRP general assembly (ISSN 0007-8506) Sydney, Australia, August 20-26, 2000.
wa0686 Derek Göbel, Model derivation and control system design for the Fast and Accurate Manipulator Module, Report no. wa0686, March, 2000.
wa0687 n.v.t., Norm: NEN-EN-ISO 9283, Report no. wa0687, March, 2000.
wa0688 A. Schoonderbeek, Bandspanningsregelaar, Report no. wa0688, March, 2000.
wa0689 R.G.K.M. Aarts and J.B. Jonker, Dynamic simulation of flexible link manipulators using adaptive modal integration, pp. 165-180 in NATO Advanced Research Workshop on Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion, Ed. Jorge Ambrósio and Michal Kleiber (No ISBN or ISSN) Pultusk, Poland, July 2-7, 2000. EM.
wa0690 J. Olde Benneker. J. Eindhoven, 000008: Laserharden "Mitnehmerhebel", Report no. wa0690, March, 2000.
wa0691 H.A. Roelofs, Resolutieverbetering door regeling van Philips Analyticals goniometer, Report no. wa0691, May, 2000.
wa0692 Otto Salomons, Elmer Arentsen, Ronald Aarts and Fred van Houten, Towards dynamic tolerance analysis using a finite element formulation, pp. 1-8 in Proceedings of DETC’00, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conference (ISBN 0-7918-3506-5) Baltimore, Maryland, USA, September 10-13, 2000. EM.
wa0693 M. Bosman, LB00-40: Laserlassen van RVS-templates met een 4 kW CW Nd:YAG-laser, Report no. wa0693, January, 2000.
wa0694 M. Bosman, LB00-41: Lassen van giet-aluminium met een 4 kW CW Nd:YAG-laser, Report no. wa0694, February, 2000.
wa0695 W. Husslage, G. Semmekrot, LB00-42: Lassen van stalen buizen met een 2 kW CW Nd:YAG-laser, Report no. wa0695, January, 2000.
wa0696 J. Olde Benneker, Inventarisatie laserlassen: literatuuronderzoek & informatie leveranciers, Report no. wa0696, May, 2000.
wa0697 B.Bonsen, A modal reduction method for the dynamic analysis and simulation of flexible mechanisms and manipulators, Report no. wa0697, June, 2000.
wa0698 C. Brendel, Path generation: From ISO-code to reference-data, Report no. wa0698, May, 2000.
wa0699 R.Y. van der Moesdijk, Design and implementation of a z-axis for the Gantry robot, Report no. wa0699, June, 2000.
wa0700 Jaap Hoftijzer, Disturbance observer design for the Fast and Accurate Manipulator Module, Report no. wa0700, June, 2000.
wa0701 J.B. Jonker and R.G.K.M. Aarts, A perturbation method for dynamic analysis and simulation of flexible manipulators, Multibody Systems Dynamics (ISSN 1384-5640) 6 (3) pp. 245-266 (2001). NIMR, EM. DOI: 10.1023/A:1012070525137.
wa0702 W. Looman, Seam teaching for laser welding with the FAMM using the falldorf seam detection system, Report no. wa0702, June, 2000.
wa0703 J. Olde Benneker, 000019: Laserlassen RVS304 met behulp van de Haas HL200 CD Nd:YAG-laser, Report no. wa0703, June, 2000.
wa0704 Huub Uijen, Adaptive Passivity Based Controller design for the Fast and Accurate manipulator Module, Report no. wa0704, June, 2000.
wa0705 A.L.J. Verkuijl, Kort door de bocht, Integratie van de Haas lasoptiek met de Stäubli RX-90 robot, Hogeschool Enschede, Report no. wa0705, June, 2000.
wa0706 Erwin Schrijver and Johannes van Dijk, On the design of robust disturbance observers for mechatronic systems, pp. 887-892 in 1st IFAC Conference on Mechatronic Systems, Ed. R. Iserman (No ISBN or ISSN) Darmstadt, Germany, September 18-20, 2000. DISC.
wa0707 Y. Su, J. Meijer, R.G.K.M. Aarts, G. den Ouden and Q. Guan, Laser welding of stainless steel in different orientations, pp. C210-C218 in ICALEO 2000 (ISBN 0-912035-62-5) Dearborn (MI), USA, October 2-5, 2000. IPV.
wa0708 Yandong Su, R.G.K.M. Aarts, J. Meijer and Q.Guan, Study on the effect of active-fluxes in laser welding, pp. C35-C41 in ICALEO 2000 (ISBN 0-912035-62-5) Dearborn (MI), USA, October 2-5, 2000. IPV.
wa0709 Sjoerd Postma, Ronald G.K.M.Aarts and Johan Meijer, Penetration detection in Nd:YAG laser welding of sheet metal by optical sensors, pp. E44-E51 in ICALEO 2000 (ISBN 0-912035-62-5) Dearborn (MI), USA, October 2-5, 2000. IPV.
wa0710 Y. Su, Influence of the welding orientation on the weldability, Report no. wa0710, June, 2000. NIMR publication.
wa0711 W. Keijer, Offline programmeersysteem voor 2D laserbewerkingsmachines, Report no. wa0711, July, 2000.
wa0712 Piet Kamma, Path generation, Providing reference data in dSPACE from a predefined path with any given two-dimensional geometry for the Fast and Accurate Manipulator Module, Report no. wa0712, July, 2000.
wa0714 W.Keijer, Voorstel (ISO) NC-codes voor laserbewerking, Report no. wa0714, July, 2000. NIMR.
wa0715 J. Olde Benneker, Robot laserlassen RVS, Report no. wa0715, July, 2000.
wa0716 Catharinus de Schiffart, Design & implementation of a learning feed-forward controller for the lineair motor motion system, Report no. wa0716, September, 2000.
wa0717 J. Olde Benneker, Laserlassen van aluminiumlegering met draadtoevoer: een eerste orienterend experiment, GA00-27, Report no. wa0717, July, 2000. PMP-rapport.
wa0718 J. Olde Benneker, Invloed van schermgas bij het laserlassen van aluminiumlegeringen, GA00-28, Report no. wa0718, August, 2000. PMP-rapport.
wa0719 J. Olde Benneker, Laserlassen van aluminiumlegeringen: case URENCO, GA00-29, Report no. wa0719, August, 2000. PMP-rapport.
wa0721 G.R.B.E. Römer, Haalbaarheidsonderzoek: is het laserlassen m.b.v. meerassige (Stäubli RX90) robot mogelijk?, Report no. wa0721, August, 2000.
wa0722 G.J.W. Wes, Bepaling invloed stijfheid en regelparameters van werkstation WSC op de laskwaliteit, Report no. wa0722, August, 2000.
wa0723 W.D.H.C. Duif, Fuzzy supervisory control of an overhead crane, Report no. wa0723, September, 2000.
wa0724 Erwin Schrijver, Johannes van Dijk, Henk Nijmeijer, Equivalence of Disturbance Observer Structures for Linear Systems, pp. 4518-4519 in 39th Conference on Decision and Control, IEEE 2000 (No ISBN or ISSN) Sydney, Australia, December 12-15, 2000. DISC.
wa0725 E. Papen, Ontwerp en realisatie van een rotatiecladstation binnen een fast-ethernet netwerk, Report no. wa0725, September, 2000.
wa0726 P. Dijk, Development of a surface acoustic wave linear motor, Report no. wa0726, November, 2000.
wa0727 S.L. Wijnia, Realisatie van een piëzo-elektrisch aangedreven ECM-spil, Fase 1: Rotatiepiëzomotor, Report no. wa0727, October, 2000.
wa0728 Ronald G.K.M. Aarts, J.B. Jonker and R.R. Waiboer, Efficient dynamic simulation of flexible link manipulators, Volume 1, pp. 103-108 in Fifth Motion and Vibration Conference, MOVIC 2000, Ed. Bijan Samali (ISBN 1-86365-529-8) Sydney, Australia, December 3-8, 2000. EM.
wa0730 R.R. Waiboer, Inventory of off-line programming software for laser welding, Report no. wa0730, October, 2000. NIMR publication P.00.8.043.
wa0731 Ch. Hesselink, T. Klaver, Realisatie van een netwerk met een autonoom gecentraliseerd veiligheidscircuit in een laserlaboratorium, Report no. wa0731, October, 2000.
wa0732 H. Super, Simulation of controlled flexible manipulator motion using a modal reduction method, Report no. wa0732, November, 2000. EM.
wa0734 R.F. de Graaf, J. Meijer, Laser- en waterstraalsnijden van hybride plaatmaterialen, C.94.716.UT.WB, Report no. wa0734, April, 1999. IOP-metalen.
wa0735 J. Olde Benneker, 000007.2: Laserablatie aluminiumlaag plano, Report no. wa0735, October, 2000. LaserACT.
wa0736 J.C.M. Storm, Ontwerp van een manipulator voor het laserlassen van grote opslagtanks, Report no. wa0736, April, 2001.
wa0737 W.M. Zweers, System Identification and Feedback Control in Laser Welding, Report no. wa0737, December, 2000.
wa0738 R.F. de Graaf and J. Meijer, Laser cutting of metal laminates: analysis and experimental validation, Journal of Materials Processing Technology (ISSN 0924-0136) 103 (1) pp. 23-28 (2000).
wa0739 J. van Dijk, Robuust ontwerpen van servosystemen, pp. D0620-1,D0620-42 in Handboek Elektrotechniek, 90-6500-398-3, Ten Hagen Stam, July, 2000.
wa0740 G.R.B.E. Römer, Control of laser surface alloying, Journal of Production Engineering (ISSN 1228-8497) 3 (3) pp. 32-37 (2000).
wa0741 J. Meijer, Invoering Nd:YAG-laser vraagt verandering bedrijfscultuur, Metaal en Kunststof (ISSN 0026-0460) 38 (7) pp. 10-11 (2000).
wa0742 J. Meijer, Hybride plaatmaterialen prima te snijden met laser- en waterstraal, Metaal en Kunststof (No ISSN) 37 (20) pp. 40-42 (1999).
wa0743 J. van Dijk, R. Tinsel, E. Schrijver, Learning control of direct drive systems with cogging force disturbances, Volume 1, pp. 381-386 in in Fifth Motion and Vibration Conference, MOVIC 2000, Ed. Bijan Samali (ISBN 1-86365-529-8) Sydney, Australia, December 3-8, 2000. DISC.
wa0744 R.M. Koers, Simulaneous seam detection and tracking with the FAMM using the Falldorf seam detection system, Report no. wa0744, December, 2000.
wa0745 J. Olde Benneker, 000023: Laserlassen verzinkt staal profiel (vertrouwelijk), Report no. wa0745, December, 2000. vertrouwelijk.
wa0746 M.L. Rozeboom, Friction Modeling for the Simulation of Robot Manipulators, Report no. wa0746, December, 2000.
wa0747 J. Olde Benneker, 000020: Laserlassen FSHP, Report no. wa0747, December, 2000.
wa0748 H.J. Coelingh, E. Schrijver, Th.J.A. de Vries, J. van Dijk, Design of Disturbance Observers for the Compensation of Low-Frequency Disturbance, pp. 75-80 in MOVIC 2000, Volume 1, Ed. Bijan Samali (ISBN 1-86365-529-8) Sydney, Australia, December 4-8, 2000.
wa0749 Geert Langeslag, Design and implementation of a self-tune program for the Workstation Coherent, Report no. wa0749, February, 2001.
wa0750 J. Olde Benneker, 000028: Laserboren silicium wafers, Report no. wa0750, January, 2001. IPV.
wa0751 Ronald G.K.M. Aarts and J.B. Jonker, Efficient dynamic simulation of flexible link manipulators with PID control, pp. 1-8 in Proceedings of DETC’01, 2001 ASME Design Engineering Technical Conferences, Ed. D.T.Mook and B.Balachandran (ISBN 0-7918-3531-6) Pittsburgh, Pennsylvania, September 9-12, 2001. EM, NIMR.
wa0752 J. Olde Benneker, Laserlassen met de CW Nd:YAG laser: cases HSA BV (PMP-rapport nr.: GA01-39), Report no. wa0752, February, 2001. IPV.
wa0753 J. Olde Benneker, Laserlassen met de CW Nd:YAG laser: cases Urenco (vervolg) (PMP-rapport nr.: GA01-40), Report no. wa0753, February, 2001. IPV.
wa0754 J. Olde Benneker, Laserlassen met de CW Nd:YAG laser: cases HSA BV Materiaalkundige analyses(PMP-rapport nr.: GA01-41), Report no. wa0754, February, 2001. IPV.
wa0755 J. Olde Benneker, 000007 (vervolg): laserablatie aluminiumlaag plano (vervolgexperiment 1) LASERACT, Report no. wa0755, February, 2001. IPV.
wa0756 J. Olde Benneker, 010006: lasersnijden kunststof (BOPP) folie, Report no. wa0756, February, 2001. IPV.
wa0757 J. Olde Benneker, 000032: laserlassen RVS producten met de CW Nd:YAG laser (vertrouwelijk), Report no. wa0757, February, 2001. IPV, vertrouwelijk.
wa0758 Ronald Aarts, Detectie van volledige doorlas bij Nd:YAG-laserlassen, Materialen (ISSN 0926-8979) 17 (2) pp. 4-5 (2001). EM, NIMR.
wa0759 Gert-Willem Römer, Gerobotiseerd laserlassen kan niet zonder naadvolgen, Materialen (ISSN 0926-8979) 17 (2) pp. 6-7 (2001). IPV.
wa0760 S. Postma, R.G.K.M. Aarts and J. Meijer, Penetration detection in Nd:YAG laser welding using optical sensors, pp. 313-319 in Proceedings of the 9th International Conference on Sheet Metals (SheMet 2001), Ed. J.R. Duflou, M. Geiger, H.J.J. Kals, B. Shirvani and U.P. Singh (ISBN 90-73802-78-4) Leuven (B), April 2-4, 2001. EM, NIMR.
wa0761 R.G.K.M. Aarts, J.B. Jonker and R.R. Waiboer, Modelling and Efficient Dynamic Simulation of Flexible Link Manipulators, pp. 413-422 in Proceedings 3rd Workshop on European Scientific and Industrial Collaboration, Ed. J. van Amerongen, J.B. Jonker and P. Regtien (ISBN 90 365 16102) WESIC 2001, University of Twente, Enschede, the Netherlands, Drebbel, June, 27-29, 2001. EM, NIMR.
wa0762 R.G.K.M. Aarts, J.B. Jonker, A perturbation method for the dynamic simulation of manipulators with joint friction, pp. Th1-2: 1-3 in Euro Mech Colloquium 427 - Computational Techniques and Applications in Nonlinear Dynamics of Structures and Multibody Sysrems, Ed. A. Ibrahimbegovic and W. Schiehlen (No ISBN or ISSN) Cachan, France, September 24-27, 2001. EM, NIMR.
wa0763 J. Olde Benneker, R. Brink, Case DAF Trucks NV: laserlassen overlapnaad onverzinkt staal, Report no. wa0763, March, 2001. IPV.
wa0764 Ronald Aarts en Gert-Willem Römer, Sensoren voor het laserlassen, Lastechniek (ISSN 0023-8694) 67 (3) pp. 35-36 (2001). EM, NIMR.
wa0765 J. Olde Benneker, Literatuuronderzoek laserlassen van aluminiumlegeringen (PMP-rapp.nr.: GA01-45), Report no. wa0765, September, 2001. IPV.
wa0766 D.F. de Lange, Laseroptiek, Lastechniek (ISSN 0023-8694) 67 (3) pp. 26-27 (2001). IPV.
wa0767 J. Meijer, Lassen, snijden en cladden met lasers, Lastechniek (ISSN 0023-8694) 67 (3) pp. 4-7 (2001). IPV.
wa0768 R.B.G.Tinsel, Iterative Learning Control for a Gantry type manipulator, Report no. wa0768, April, 2001.
wa0769 J. Olde Benneker, 010006 (vervolg): lasersnijden kunststof (BOPP) folie (vervolg), Report no. wa0769, April, 2001. IPV.
wa0770 C.J. Boer, Tool Center Point calibration and off-line seam tracking using the Stäubli RX90 robot and the Falldorf seam detection sensor, Report no. wa0770, April, 2001.
wa0771 W.C.M. Pancras, Modelling and Control of the Gantry Manipulator, Report no. wa0771, June, 2001.
wa0772 A.J.F.M. Hesemans, Controlling partial penetration in Nd:YAG laser welding, Report no. wa0772, April, 2001.
wa0773 R.G.K.M. Aarts and J.B. Jonker, Dynamic simulation of planar flexible link manipulators using adaptive modal integration, Multibody Systems Dynamics (ISSN 1384-5640) 7 (1) pp. 31-50 (2002). NIMR, EM. DOI: 10.1023/A:1015271000518.
wa0774 J. Olde Benneker, 010013: laserreiniging lead frames, Report no. wa0774, April, 2001. IPV.
wa0775 H.D. Kloppenburg, Een mechatronisch ontwerp van een industriële robot, Report no. wa0775, April, 2001.
wa0780 S. Postma, R.G.K.M. Aarts and A.J.F.M. Hesemans, Penetration feedback control in overlap laser welding of sheet metal, pp. 495-503 in Proceedings 3rd Workshop on European Scientific and Industrial Collaboration, Wesic 2001, Ed. Job van Amerongen, Ben Jonker and Paul Regtien (ISBN 9036516102) Enschede (NL), June 27-29, 2001. EM, NIMR.
wa0781 J. Olde Benneker, Lasertraining - Praktijk, Duracel, Aarschot (België), May, 2001. IPV.
wa0782 J.H. Meuleman, Het ontwerp van een 6-dimensionale krachtensensor, Report no. wa0782, May, 2001.
wa0783 R.G.K.M. Aarts, Spacar manual - 2001 edition, Report no. wa0783, May, 2001.
wa0784 J. Olde Benneker, Laserlassen met de CW Nd:YAG laser - eindrapport, Report no. wa0784, May, 2001.
wa0785 N.P. Weerkamp, Dynamic finite element modeling of thermal effects during laser welding, Report no. wa0785, July, 2001.
wa0786 D.J. Veldhorst, Cogging disturbance rejection by means of Narrowband Feedforward Active Noise Control --- applied to the Fast and Accurate Manipulator Module, Report no. wa0786, July, 2001.
wa0787 M. Vermeer, Het ontwerp van een generiek mechanisatieplatform en een flexibele overzetter, Report no. wa0787, July, 2001.
wa0788 R.A. Marissen, Het ontwerp van een twee-assig pointing mechanism voor COALA, Report no. wa0788, July, 2001.
wa0789 S.A. van den Elzen, Design of a smart lens support with two active degrees of freedom (confidential), Report no. wa0789, July, 2001.
wa0790 M.R. Houwing, Design of a powder injection system to be used in highly automated laser cladding and - generating station, Report no. wa0790, December, 2001. confidential.
wa0791 J. Olde Benneker, G.J.W. Wes, 010004: Lasersnijden van papier/karton (BTS-project), Report no. wa0791, July, 2001.
wa0792 G.R.B.E. Römer, N.P. Weerkamp, J. Meijer, S. Postma, Nonminimum Phase Behavior of Laser Material Processing, No pages in Proceedings of the ICALEO'01 (ISBN 0-912035-73-0) ICALEO 2001, Jacksonville, Florida, (USA), October, 15-18, 2001. IPV, NIMR.
wa0793 S. Postma, R.G.K.M. Aarts, J. Meijer, J.B. Jonker, W.M. Zweers, Penetration Control in Laser Welding of Sheet Metal using Optical Sensors, No pages in Proceedings of the ICALEO'01 (ISBN 0-912035-73-0) ICALEO 2001, Jacksonville, Florida, (USA), October 15-18, 2001. EM, NIMR.
wa0794 I. Stieltjes, Positie van het focus bij een lasoptiek met een door de pols geleidde laserbundel, Report no. wa0794, December, 2001.
wa0795 G.R.B.E. Römer, Seam tracking for laser welding with an industrial robot, pp. 477-486 in Proceedings 3rd Workshop on European Scientific and Industrial Collaboration, Ed. J. van Amerongen, J.B. Jonker and P. Regtien (ISBN 90 365 16102) WESIC 2001, Univerisity of Twente, Enschede, the Netherlands, Drebbel, June, 27-29, 2001.
wa0796 E. Schrijver and J. van Dijk, Feedback interpretation of disturbance observers for rigid mechanical systems, pp. 199-208 in Proceedings 3rd Workshop on European Scientific and Industrial Collaboration, Ed. J. van Amerongen, J.B. Jonker and P. Regtien (ISBN 90 365 16102) WESIC 2001, University of Twente, Enschede, the Netherlands, Drebbel, June, 27-29, 2001. Drebbel.
wa0797 J. Meijer, S. Postma and G.R.B.E. Römer, Optical sensors for penetration control in Nd:YAG laser welding, pp. 75-86 in Laser Assisted Net Shape Engineering 3, Ed. M. Geiger, A. Otto, Erlangen (ISBN 3-87525-154-7) 3rd LANE 2001, Erlangen, Germany, Meisenbach-Verlag Bamberg 2001, August, 28-31, 2001. IPV, NIMR.
wa0798 J. van Dijk, R.B.G. Tinsel, E. Schrijver, Comparison of two iterative learning concepts applied on a manipulator with cogging force disturbances, pp. 71-76 in IFAC Workshop on Adaptation and Learning in Control and Signal Processing (ALCOSP) (No ISBN or ISSN) Cernobbio-Como, Italy, August 29-31, 2001. DISC.
wa0799 J. Olde Benneker, 990010.1: Laserharden van score, Report no. wa0799, August, 2001. IPV.
wa0800 J. Olde Benneker, PMP-project: case Inalfa, afsluitend laserlasexperiment (concept), Report no. wa0800, August, 2001. IPV.
wa0801 St. Resink, Stageverslag: deel I,, Report no. wa0801, October, 2001.
wa0802 M. Ezendam, Lasertrainingsfaciliteiten (deel 1 t/m 10), University of Twente, October, 2001.
wa0803 R.P. Haanstra, Design and production of a microgripper for inspection purpose in the semi-conductor industry based on micro-machining techniques, Report no. wa0803, October, 2001. confidential.
wa0804 J. Olde Benneker, PMP DU-proj.: case Inalfa, afsluitend laserexperiment combilamp Rr DX41-laserlassen prototypeserie, Report no. wa0804, October, 2001. IPV.
wa0805 J. Olde Benneker, PMP-project: Kwaliteit en kosten bij het lassen van dunne plaat met nieuwe lasprocessen (PMP rap.nr.: DU01-43, Report no. wa0805, October, 2001. IPV.
wa0806 I. Vermeij, Modelling and Identification of the Stäubli RX90 Robot: "Two and three degree of freedom models", Report no. wa0806, November, 2001. EM, NIMR.
wa0807 E.S. Voortman, Applicability of CMOS camera technology for monitoring the melt pool in Nd:YAG laser welding, Report no. wa0807, November, 2001. EM, NIMR.
wa0808 R.R.Waiboer, Off-line Programming for Robotised Laser Welding (Literature Review), Report no. wa0808, December, 2001. EM, NIMR.
wa0809 J.J. Jeninga, Procesbewaking bij het laserlassen van aluminium, Report no. wa0809, December, 2001.
wa0813 H.M. Duringhof, Learning based disturbance rejection on the Fast and Accurate Manipulator Module, Report no. wa0813, February, 2002.
wa0814 Geert Veenstra, Dynamische-knipspleet-meter --- Nauwkeurigheid- en realisatieonderzoek, Report no. wa0814, January, 2002.
wa0815 J. van Dijk, R.G.K.M. Aarts, Mechatronica Project, Project F - Vakcode 110307, Opdrachtomschrijving: Intelligent lager, Report no. wa0815, January, 2002.
wa0816 S. Postma, R.G.K.M. Aarts, J. Meijer, Werkwijze en een inrichting voor het meten en regelen van een laser-lasproces, NL patent application 1018861, August, 2001. EM, NIMR.
wa0816b S. Postma, J. Meijer, R.G.K.M. Aarts, Method and device for measuring and controlling a laser welding process, NIMR, 1018861, PCT/NL02/00571, September, 27, 2002. EM, NIMR, IPV.
wa0817 J. Meijer, Laser Micromachining, pp. 203-237 in Micromachining of Engineering Materials, Ed. Joseph McGeough, 0-8247-0644-7, Marcel Dekker, Inc., January, 2002.
wa0818 A.G. Terpstra, Iterative Learning Control Of High Speed Scanning Mirrors, DISC, Report no. wa0818, February, 2002.
wa0819 J. Kaandorp, Laserlassen van Aluminium aan Staal (vertrouwelijk), Report no. wa0819, February, 2002.
wa0820 E. Schrijver, Software manual workstation GANTRY, Report no. wa0820, February, 2002. Drebbel.
wa0821 M.P. Koster, Smart Mechatronics, pp. 7-13 in WESIC 2001, Ed. Job van Amerongen, Ben Jonker, Paul Regtien (ISBN 90 365 16102) University of Twente, Enschede, the Netherlands, 27-29 June, 2001. Drebbel.
wa0822 J. Olde Benneker, Praktijkvoorbeelden laserlassen, Federatie Dunne Plaat, Universiteit Twente, April, 19, 2001. IPV.
wa0823 J. Olde Benneker, Laserlassen: case Inalfa, eindrapport PMP-proj.: DU02-46, Report no. wa0823, March, 2002. NIMR.
wa0825 T. Masuzawa, J. Meijer, T. Bourouina, A. Schoonderbeek, J. Eindhoven, Laser Beam Machining of Microlenses by Hole Area Modulation (HAM) Method, pp. 395-398 in Proceeding of the Euspen Conference 2002, Ed. F.L.M. Delbressine, P.H.J. Schellekens, F.G.H. Homburg, H. Haitjema (ISBN 90-386-2883-8) Euspen-conferentie Eindhoven, TUE, 26-30 May, 2002. IPV.
wa0826 S.J.A. Hek, Adaptive rejection of cogging disturbances on the Fast and Accurate Manipulator Module, Report no. wa0826, May, 2002. DISC.
wa0827 M.W. de Graaf, Indirect Feedforward Active Noise Control methods, Report no. wa0827, May, 2002. EM.
wa0828 J. Wes, G. Cornelissen, T.W. van der Zee, Laserlassen: voortgangsverslag stuurgroepbijeenkomst 27/03 PMP-proj.: DU02-49, Report no. wa0828, March, 2002.
wa0829 W. Engels, Vibration Isolation of a Shelf with a Basic Load Model, Report no. wa0829, April, 2002.
wa0830 J. Wes, 020001: vacuumdicht lassenvan blok m.b.v. cw Nd:YAG laser, Report no. wa0830, April, 2002.
wa0831 J. Olde Benneker, Laserlassen: case STORCK Industrial Models, eindrapportage Laserlassen panel met de cw Nd:YAG laser, DU02-31, Report no. wa0831, April, 2002. NIMR.
wa0832 Aart Schoonderbeek, Cornelis A. Biesheuvel, Ramon M. Hofstra, Klaus-J.Boller and Johan Meijer, High speed drilling of metals with a long pulse XeCl excimer laser, pp. 667-677 in High-Power Laser Ablation IV, Proc. SPIE 4760, Ed. Claude R. Phipps (ISBN 0-8194-4524-x, ISSN 0277-786x) Taos, New Mexico, USA, SPIE, April 21-26, 2002.
wa0833 J. Zandman, Stageverslag: snelkoppeling voor de Stäubli Robot, Report no. wa0833, May, 2002.
wa0834 J. Olde Benneker, 020009: laserlassen kunststof membraan op drager (vertrouwelijk), Report no. wa0834, May, 2002. NIMR.
wa0836 Herman Soemers, Vision on mechatronic design, pp. 1-2 in Proceedings of the 8th Mechatronics Forum International Conference Mechatronics 2002, Ed. J. van Amerongen, J.B. Jonker, P.P.L. Regtien and S. Stramigioli (ISBN 90 365 17664) Enschede, The Netherlands, Drebbel, June 24-26, 2002. DISC.
wa0837 H.M.J.R. Soemers and J. van Eijk, Mechatronic Education at Philips, pp. 137-141 in Proceedings of the 8th Mechatronics Forum International Conference Mechatronics 2002, Ed. J. van Amerongen, J.B. Jonker, P.P.L. Regtien and S. Stramigioli (ISBN 90 365 17664) Enschede, The Netherlands, Drebbel, June 24-26, 2002. DISC.
wa0838 R.R. Waiboer, I. Vermeij, R.G.K.M. Aarts and J.B. Jonker, Three Degree of Freedom Robot Identificaton for Dynamic Simulation, pp. 534-543 in Proceedings of the 8th Mechatronics Forum International Conference Mechatronics 2002, Ed. J. van Amerongen, J.B. Jonker, P.P.L. Regtien and S. Stramigioli (ISBN 90 365 17664) Enschede, The Netherlands, Drebbel, June 24-26, 2002. DISC.
wa0839 H. Super, J. van Dijk and J.B. Jonker, Experimental Set-up for Hybrid Isolation of Structure Borne Sound, pp. 1416-1425 in Proceedings of the 8th Mechatronics Forum International Conference Mechatronics 2002, Ed. J. van Amerongen, J.B. Jonker, P.P.L. Regtien and S. Stramigioli (ISBN 90 365 17664) Enschede, The Netherlands, Drebbel, June 24-26, 2002. DISC.
wa0840 Sjoerd Postma, Ronald G.K.M. Aarts, Johan Meijer and Ben Jonker, Feedback Control for Optimal Production Speed in Laser Beam Welding of Mild Steel, pp. 10 in Proceedings of the ICALEO'02 (ISBN 0-912035-72-2) ICALEO 2002, Scottsdale, Arizona , (USA), October 14-17, 2002. EM.
wa0841 J. Olde Benneker, Laser cutting copper-coated PET foil (vertrouwelijk), Report no. wa0841, Juli, 2002. NIMR.
wa0842 V. Kovalenko, M. Anyakin, J..Meijer, A. Degtyarev, A. Kozyrev, Studying of Laser Processed Material Optical Parameter Dependencies from Temperature, pp. 10 in Proceedings of the ICALEO'02 (ISBN 0-912035-72-2) ICALEO 2002, Scottsdale, Arizona , (USA), October 14-17, 2002. IPV.
wa0843 M. van Barneveld, Preparing the Stäubli workstation for on-line seam tracking with the Falldorf seam tracking sensor and for laser welding applications, Report no. wa0843, August, 2002. IPV.
wa0844 M. van Barneveld, Interfacing between laser controllers and workstations, Report no. wa0844, August, 2002. IPV.
wa0845 J.M. Versteeg, Modelling and identification of a wide-format paper transport system - Stick-slip dominated non-linear models, Report no. wa0845, August, 2002. EM.
wa0846 G.J.W. Wes, G. Cornelissens, T.W. van der Zee, Laserlassen: voortgangsverslag stuurgroepbijeenkomst 24-09-2002, PMP-rapport DU02-59, Report no. wa0846, September, 2002.
wa0847 B. Pathiraj, J.J. Kaandorp, Laserlassen: van dunne platen staal aan aluminium; voortgangsverslag stuurgroepbijeenkomst 24-09-2002, PMP-rapportnummer DU02-60, Report no. wa0847, September, 2002.
wa0848 J. Vermeulen, Ontwerp van een transportsysteem en een fixatiemechanisme voor toepassing op het "Modulair Mechanisatie Platform", Report no. wa0848, September, 2002.
wa0849 A.H. Pross, Multichannel feedforward control of a six-degrees-of-freedom vibration isolation setup, EM, Report no. wa0849, November, 2002.
wa0850 W. Hagedoorn, Design and identification of a six-degrees-of-freedom vibration isolation setup, EM, Report no. wa0850, November, 2002.
wa0851 G.R.B.E. Römer, Snijden van metalen van hoogvermogen lasers, 90-75740-24-7, Vereniging FME-CWM, September, 2002. IPV.
wa0852 G.R.B.E. Römer, Lassen van metalen met hoogvermogen lasers, 90-75740-25-5, Vereniging FME-CWM, September, 2002. IPV.
wa0853 T.D. Lauret, Ontwerp van een lineaire stick-slip actuator voor toepassing in braillecel, Report no. wa0853, October, 2002. (vertrouwelijk).
wa0854 J.J.C. Eindhoven, 020002: Gat "boren" in PEEKbuis m.b.v. 248 mm laserstraling, Report no. wa0854, October, 2002.
wa0855 J.J.C. Eindhoven, 020003: Snijden van MYLAR folie, Report no. wa0855, October, 2002.
wa0856 S. ten Broeke, Azimuth encoder system on behalf of the Multi Role Armoured Vehicle - Active distance control and environmental influences, Report no. wa0856, December, 2002.
wa0857 R.G.K.M. Aarts, SPACAR Manual - 2002 edition, Report no. wa0857, November, 2002. TIM, EM, NIMR.
wa0858 J. Olde Benneker, Eindrapport DU-project, Report no. wa0858, November, 2002. NIMR.
wa0859 J.W. Ridderinkhof, Development of a camera system for controlling the laser welding process, Report no. wa0859, December, 2002. EM, NIMR.
wa0860 J.J. Kaandorp en B. Pathiraj, Laserlassen van dunne platen staal aan aluminium, Lastechniek (ISSN 0023-8694) 68 (11) pp. 16-18 (2002).
wa0861 G.R.B.E. Römer, Oppervlaktebewerkingen met hoogvermogens lasers, 90-75740-26-3, Vereniging FME-CWM, December, 2002. IPV.
wa0862 J.F. Koning, Integration and automation of a laser welding cell, Report no. wa0862, January, 2003. IPV, NIMR.
wa0863 J.F. Koning, VLaser - Manual and reference guide, Report no. wa0863, 18 december, 2002.
wa0864 D.F. de Lange, Unsteady Meltpool and Keyhole Modelling for Laser Welding, Report no. wa0864, November, 2002. NIMR, NIMR publication (Project MC8.02115).
wa0865 S. Postma, R. G. K. M. Aarts, Johan Meijer, and J. B. Jonker, Penetration control in laser welding of sheet metal, Journal of Laser Applications (ISSN 1042-346X) 14 (4) pp. 210-214 (2002). EM, NIMR.
wa0866 Sjoerd Postma and Ronald G.K.M. Aarts, Weld Pool Control in LaserWelding, pp. 23 in 21st Benelux Meeting on Systems and Control, Ed. Bram de Jager and Hans Zwart (ISBN 90-386-2893-5) Veldhoven, The Netherlands, March 19 – 21, 2002. EM, NIMR.
wa0867 H. Super and J. van Dijk, Controllers for hybrid isolation of structure borne sound in a demonstrator set-up, pp. 65 in 21st Benelux Meeting on Systems and Control, Ed. Bram de Jager and Hans Zwart (ISBN 90-386-2893-5) Veldhoven, The Netherlands, March 19 – 21, 2002. EM.
wa0868 R.R. Waiboer and R.G.K.M. Aarts, Robot Identification for Accurate Dynamic Simulation, pp. 73 in 21st Benelux Meeting on Systems and Control, Ed. Bram de Jager and Hans Zwart (ISBN 90-386-2893-5) Veldhoven, The Netherlands, March 19 – 21, 2002. EM, NIMR.
wa0869 E. Schrijver, J. van Dijk, Disturbance Observers for Rigid Mechanical Systems: Equivalence, Stability and Design, Journal of Dynamic System, Measurement and Control (ISSN 0022-0434) 124 (4) pp. 539-548 (2002). DISC.
wa0870 A. Schoonderbeek, C.A. Biesheuvel, R.M. Hofstra, K.-J. Boller, J. Meijer, High Speed Drilling of Metals with a Long Pulse XeCl Excimer Laser, pp. 10 in Proceedings of the ICALEO'02 (ISBN 0-912035-72-2) ICALEO 2002, Scottsdale, Arizona, USA, October 14-17, 2002. IPV.
wa0871 H.M.J.R. Soemers, De ontwikkeling in het Mechatronisch Ontwerpen, Universiteit Twente, November, 2002. DISC.
wa0872 J. Olde Benneker, 020014: Laserlassen aluminium combinatie (vertrouwelijk), Report no. wa0872, January, 2003. NIMR.
wa0873 H. Buikema, Image based process control of laser cladding, Report no. wa0873, March, 2003. IPV, NIMR.
wa0874 J. Olde Benneker, 030001: Advies ombouw CO2 laser t.b.v. laserlassen (vertrouwelijk), Report no. wa0874, January, 2003. NIMR.
wa0875 J. Meijer, K. Du, D. Hoffmann, V.S. Kovalenko, T. Masuzawa, A. Ostendorf, R. Poprawe, W. Schulz, Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons, pp. 531-550 in Annals of the CIRP, Ed. Edition Colibri Ltd. Uetendorf (ISBN 3-905 277-38-7) San Sebastian, Spain, Technische Rundschau, Edition of Colibri Publishers, August, 19, 2002. IPV, EM.
wa0876 J. Olde Benneker, 020014: Laserlassen aluminium combinatie deel II (vertrouwelijk), Report no. wa0876, February, 2003. NIMR.
wa0877 R.G.K.M. Aarts, J. van Dijk, Systeem- en regeltechniek 1 (Lecture notes 280214/113115 Dutch), Report no. wa0877, April, 2003.
wa0878 G. Nijsse, H. Super, J. van Dijk, J.B. Jonker, Subspace based identification and control of a six-degrees-of-freedom vibration isolation set-up, No pages in Euronoise (No ISBN or ISSN) Napels, Italy, May, 19-21, 2003.
wa0879 T.W. van der Zee, Modeling the seam teaching process for Laser welding applications, Report no. wa0879, March, 2003. IPV, NIMR.
wa0880 R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Closed-loop Dynamic Robot Simulation for Laser Welding, No pages in Fourth International Conference on Industrial Automation, June 2003 (No ISBN or ISSN) Montréal, Canada, June 9-11, 2003. EM, NIMR.
wa0881 R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Closed-loop dynamic simulation of robotic manipulators with joint friction using a perturbation method, No pages in ECCOMAS Thematic Conference Multibody 2003 - Advances in Computational Multibody Dynamics (No ISBN or ISSN) Lisbon, Portugal, July 1-4, 2003. EM, NIMR.
wa0882 G.R.B.E. Römer, "Hoogvermogen lasers voor het bewerken van metalen": een leidraad voor de praktijk, 90-75740-23-9, Vereniging FME-CWM, May, 2002. IPV.
wa0883 T. Hardeman, Non-linear parameter identification in robotic systems, Report no. wa0883, April, 2003. EM, NIMR.
wa0884 M.N.W. Groenendijk, Active vibration isolation control using the Real Time Linux operating system, Report no. wa0884, May, 2003. EM.
wa0885 R.R. Waiboer, T. Hardeman, R.G.K.M. Aarts and J.B. Jonker, Non-linear parameter optimization for six degree of freedom robot identification, pp. 33 in 22nd Benelux Meeting on Systems and Control, Ed. Jan Swevers and Chritophe Lauwerys (ISBN 90-73802-81-4) Lommel, Belgium, March 19 – 21, 2003. EM, NIMR.
wa0886 J. Looman, Analysis of passive paths in hybrid isolation systems, Report no. wa0886, April, 2003. EM.
wa0887 J. Bijlstra, 3D Laser Cladding - Implementation of a workstation, Report no. wa0887, April, 2003. IPV.
wa0888 C.D. Petersen, Controlling broadband disturbances on a one-degree-of-freedom experimental vibration isolation set-up, Report no. wa0888, June, 2003. EM.
wa0889 S. de Roo, Testing the trajectory performance of the Stäubli RX90 robot for laser welding, Report no. wa0889, May, 2003. EM, NIMR.
wa0890 K. Kole, A fast and numerically reliable implementation of the state space based Filtered-x LMS algorithm, Report no. wa0890, August, 2003. EM.
wa0891 M.J. Wolbers, Design Principles of a Hybrid Mount, Report no. wa0891, June, 2003. EM, TNO report 0800.04498.
wa0892 W. Bruinenberg, Stageverslag: de gastoevoer bij het laserlassen, Report no. wa0892, June, 2003.
wa0893 H.M. Duringhof, Current status: active Flow Control, Report no. wa0893, March, 2003. EM.
wa0894 A. Kool, Modelling and identification of friction in the Stäubli RX90 robot, Report no. wa0894, August, 2003. EM, NIMR.
wa0895 J.W. van de Geest, Implementation and validation of joint flexibility in SPACAR and identification on the Stäubli RX90 robot, Report no. wa0895, August, 2003. EM, NIMR.
wa0896 G.W. van der Poel, Research on the weld pool geometry for aluminum - Literature review, Report no. wa0896, February, 2003. EM, NIMR.
wa0897 G.W. van der Poel, Nd:YAG laser welding of thin plates of aluminum alloy 5754 - Process monitoring using a CMOS based camera system, Report no. wa0897, August, 2003. EM, NIMR.
wa0898 W. Holterman, Closed loop modelling and validation of the Stäubli RX90 robot, Report no. wa0898, August, 2003. EM, NIMR.
wa0899 L. Jacobs, Modellering en identificatie van wrijving in een papiertransportsysteem, Report no. wa0899, Augustus, 2003. EM.
wa0900 D.F. de Lange, J. Meijer and J.S. Nielsen, Design of an Optical System for High Power CO2 Laser Cutting, pp. 178-184 in Proceedings of the ICALEO'03, LMP Section D (ISBN 0-912035-75-7) ICALEO 2003, Jacksonville, FL (USA), October 13-16, 2003. NIMR, IPV, EM.
wa0901 D.F. de Lange, S. Postma and J. Meijer, Modelling and Observation of Laser Welding: The Effect of Latent Heat, pp. 154-162 in Proceedings of the ICALEO'03, LMP Section C (ISBN 0-912035-75-7) ICALEO 2003, Jacksonville, FL (USA), October 13-16, 2003. NIMR,EM,IPV.
wa0902 A. Schoonderbeek, C. Biesheuvel, R. Hofstra, K.-J. Boller, J. Meijer, Material Ejection During Drilling with a Long Pulse Excimer Laser, pp. 59-66 in Proceedings of the ICALEO'03, LMF Section E (ISBN 0-912035-75-7) ICALEO 2003, Jacksonville, FL (USA), October 13-16, 2003. NIMR,IPV.
wa0903 H. Super, G. Nijsse, J. van Dijk, J.B. Jonker, Design of a hybrid six-degrees-of-freedom vibration isolation set-up, pp. 6 in Proceedings of the Euronoise (No ISBN or ISSN) Napels, Italy, June, 19-21, 2003.
wa0904 G. Nijsse, J. van Dijk, J.B. Jonker, Subspace based identification and control of one-degree-of-freedom vibration isolation set-up, pp. 6 in Proceedings of the ICOM 2003 International Conference on Mechatronics (No ISBN or ISSN) Loughborough, UK, June, 18-20, 2003.
wa0905 J. Wes, 030002: Laserlassen van staal pal aan buis, Report no. wa0905, September, 2003.
wa0906 W.R. Kampinga, Linearization of Hammerstein systems with an FxLMS algorithm — derivation, implementation, and validation, Report no. wa0906, October, 2003.
wa0907 A. Schoonderbeek, C.A. Biesheuvel, R.M. Hofstra, K.-J. Boller, J. Meijer, Shadowgraphic imaging of metal drilling with a long pulse excimer laser, pp. 395-400 in Proceedings LPM 2003 (ISBN 0-8194-4869-9, ISSN 0277-786x) 4th International Symposium on Laser Precision Microfabrication, Munich, Germany, June, 21-27, 2003. IPV.
wa0908 B. Lansdorp, Design of the HELD tether deployer - A high-tension elastically deforming tether deployer for MARS-g, Report no. wa0908, December, 2003.
wa0910 R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Application of a perturbation method for realistic dynamic simulation of industrial robots, Multibody Systems Dynamics (ISSN 1384-5640) 13 (3) pp. 323-338 (2005). NIMR, Impact, EM. See also: http://purl.org/utwente/52648.
wa0911 R.G.K.M. Aarts, J.B. Jonker and R.R. Waiboer, Realistic dynamic simulation of an industrial robot with joint friction, pp. 48-55 in ICINCO - 1st International Conference on Informatics in Control, Automation and Robotics (Volume 2), Ed. Helder Araújo, Alves Vieira, José Braz, Bruno Encarnação, Marina Carvalho (ISBN 972-8865-12-0) Setúbal (Portugal), August 25-28, 2004. EM, NIMR.
wa0911b R.G.K.M. Aarts, J.B. Jonker and R.R. Waiboer, Realistic dynamic simulation of an industrial robot with joint friction, pp. 187-194 in Informatics in Control, Automation and Robotics I, Ed. José Braz, Helder Araújo, Alves Vieira, Bruno Encarnação, 1-4020-4136-5, Springer, Dordrecht, The Netherlands, 2006. NIMR, Impact, EM, DISC.
wa0912 R.G.K.M. Aarts, T. Hardeman, R.R. Waiboer and J.B. Jonker, Dynamic simulations of an industrial robotic manipulator with joint friction and joint elasticity, pp. 49 in EuroMech 452 Colloquium on Advances in Simulation Techniques for Applied Dynamics, Ed. Martin Arnold and Werner Schiehlen (No ISBN or ISSN) Halle-Wittenberg (Germany), March 1-4, 2004. EM, NIMR.
wa0913 Roger Torell Pinent, Laser Cutting with the 4 kW Nd:YAG Laser, Report no. wa0913, November, 2003. IPV, NIMR, Report of the IAESTE Traineeship.
wa0914 K.-H. Choi, J. Meijer, T. Masuzawa, D.-H. Kim, Excimer Laser Micromachining for 3D Micro Structure, pp. 10 in Proceedings of the ICALEO'03, LMF Section A (ISBN 0-912035-75-7) Jacksonville, FL (USA), October, 13-16, 2003. NIMR, IPV.
wa0915 S.M. Stöpetie, The design of a hybrid mount, Report no. wa0915, January, 2004.
wa0917 J.T. Hofman, Feedback control of broadband disturbances on experimental vibration isolation set-ups, Report no. wa0917, January, 2004. EM.
wa0919 J. van Tienhoven, Automatic tool center point calibration for a laser welding robot, Report no. wa0919, February, 2004. EM, IPV.
wa0920 W.B.J. Hakvoort, Identification of inertia and stiffness parameters of the Stäubli RX90 robot, Report no. wa0920, February, 2004. EM, NIMR.
wa0921 W.W. Wits, Development of a design tool for drive optimisation of mechatronic systems - The spindle drive, Report no. wa0921, February, 2004. DISC.
wa0922 J.B.H. Hesselink, Design of a flexible feeding system for small parts, Report no. wa0922, March, 2004. Drebbel.
wa0923 J. van Eijk and H.M.J.R. Soemers, Industrial applications of mechatronics, pp. 6 in Mech2K3: Second International Congress on Mechatronics (No ISBN or ISSN) TU Graz, Austria, July 14-17, 2003. DISC.
wa0924 M. Lentjes, D. Klomp, K. Dickmann, Sensor concept for controlled laser cleaning via photodiode, pp. 193-195 in LACONA V - 5th International Conference on Lasers in the Conservation of Artworks (No ISBN or ISSN) Osnabrück, Germany, Deutsche Bundesstiftung Umwelt, September 15-18, 2003. IPV.
wa0925 M. Lentjes, K. Dickmann, H. Dyck, N. Munser, Laser-Präzisionsbearbeitung von Saphir für medizintechnische Anwendungen, pp. 113-116 in 16th International Scientific Conference - Materials and Process Technologies, Product and Process Development (No ISBN or ISSN) The University of Applied Science Mittweida, Germany, November 6-7, 2003. IPV.
wa0926 M. Lentjes, K. Dickmann, Sensor-System für Echtzeitkontrolle bei der Laserreinigung, pp. 68-71 in 16th International Scientific Conference - Materials and Process Technologies, Product and Process Development (No ISBN or ISSN) The University of Applied Science Mittweida, Germany, November 6-7, 2003. IPV.
wa0927 M. Lentjes, Excimerlaser en Nd:YAG-laser maken micro-materiaalbewerking mogelijk, Mikroniek (ISSN 0026-3699) 43 (5) pp. 10-11 (2003). IPV.
wa0928 J. Meijer, K. Du, D. Hoffmann, V.S. Kovalenko, T. Masuzawa, A. Ostendorf, R. Poprawe, W. Schulz, Laser Machining by short and ultrashort pulses, state of the art, Mikroniek (ISSN 0026-3699) 43 (3) pp. 11-38 (2003). IPV.
wa0929 K.H. Choi, J. Meijer, T. Masuzawa, S.S. Kim, Determination of Optimal 3D Micromachining Parameters of Hole Area Modulation(HAM) Method, pp. 170-178 in Proceedings of the ICALEO'03, LMF Section A (ISBN 0-912035-75-7) ICALEO 2003, Jacksonville, FL (USA), October 13-16, 2003. NIMR,IPV.
wa0930 V. Kovalenko, M. Anyakin, W. Duley, J. Meijer, D. Roessler, Laser 3D prototypes forming from metal and ceramic materials, pp. 66-73 in Proceedings of the ICALEO'03, LMP Section E (ISBN 0-912035-75-7) ICALEO 2003, Jacksonville, FL (USA), October 13-16, 2003. NIMR,IPV.
wa0931 T. Roeleveld, Design of a coaxial head for laser welding, Report no. wa0931, February, 2004. EM, IPV, NIMR.
wa0932 G. Cornelissens, Onderzoek naar nieuwe concepten voor flexibele schroefautomaten, Report no. wa0932, February, 2004. Drebbel.
wa0933 J. Meijer, Laser Beam Machining (LBM), state of the art and new opportunities, pp. 25 in ISEM 14 Conference (No ISBN or ISSN) Edinborugh, UK, March 29-April 1, 2004. IPV.
wa0934 T. Hardeman, Improved Laser beam Manipulation Control for Robotized Laser Welding - Literature Report, Report no. wa0934, March, 2004. EM, NIMR, NIMR publication P04.8.020.
wa0936 B.J. Aalderink, Multivariable Weld Pool Control for Double Spot Laser Welding - Literature Report, Report no. wa0936, March, 2004. EM, NIMR, NIMR publication P04.8.026.
wa0938 R.G.K.M. Aarts, J. van Dijk, Systeem- en regeltechniek 1 (Lecture notes 280214/113115 Dutch), Report no. wa0938, April, 2004.
wa0939 F.G. Niewold, H2 controller design using the Active Vibration Control Toolbox for Matlab, Report no. wa0939, May, 2004. EM.
wa0940 J. Olde Benneker, Lasersnijden & -graveren frontpanels, Report no. wa0940, May, 17, 2004. M2i.
wa0941 A.P. Leemhuis, Design of the Causal Wiener Controller for Active Vibration Isolation Control: A State-Space Approach, Report no. wa0941, June, 2004. EM.
wa0942 Tj. van der Poel, Plate cooler design report Task 2, Report no. wa0942, June, 2004. vertrouwelijk.
wa0943 A.H. Diphoorn, The influence of geometric errors in the nominal robot model on sensor-guided robotic laser welding, Report no. wa0943, July, 2004.
wa0944 K. Hoftijzer, Error weighting on the 6 DOF active vibration isolation set-up, Report no. wa0944, July, 2004.
wa0945 T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, A finite element formulation for dynamic parameter identification of robot manipulators, Multibody Systems Dynamics (ISSN 1384-5640) 16 (1) pp. 21-35 (2006). NIMR, EM.
wa0946 M.W. de Graaf, R.G.K.M. Aarts, J. Meijer, J.B. Jonker, The Influence of Geometric Errors in the Nominal Robot Model on Sensor-Guided Robotic Laser Welding, pp. 58-64 [CDROM] in ICALEO 2004 (ISBN 0-912035-77-3) San Francisco, USA, October, 4-7, 2004. EM, IPV, NIMR, DISC.
wa0947 M.W. de Graaf, R.G.K.M. Aarts, J. Meijer, J.B. Jonker, Modeling the Seam Teaching Process for Robotic Laser Welding, pp. 320-325 in Mechatronics and Robotics 2004, Vol II, Ed. Paul Drews (ISBN 3-938153-50-X) Aachen, Germany, September, 13-15, 2004. EM, IPV, NIMR, DISC.
wa0948 H.M.J.R. Soemers, D.M. Brouwer, Mechatronics and Micro Systems, pp. 609-614 in 3rd IFAC Symposium on Mechatronic Systems (No ISBN or ISSN) Sydney, Australia, September, 6-8, 2004. DISC, Drebbel.
wa0949 D.F. de Lange, A. Schoonderbeek, J. Meijer, Melt Ejection During Laser Drilling, pp. 85-94 [CDROM] in ICALEO 2004 (ISBN 0-912035-77-3) San Francisco, USA, October, 4-7, 2004. EM, IPV, NIMR.
wa0950 J. Meijer, Laser Beam Machining (LBM), State of the Art and New Opportunities, Journal of Materials Processing Technology (ISSN 0924-0136) 149 (1-3) pp. 2-17 (2004). IPV.
wa0951 D.F. de Lange, A. Schoonderbeek, J. Meijer, Simulation of Meltpool Surface Shape for Laser Drilling and Welding, pp. 337-348 in LANE 2004, Ed. M. Geiger, A. Otto (ISBN 3-87525-202-0) Erlangen, Germany, September, 21-24, 2004. EM, IPV, NIMR.
wa0953 B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Study of the optical emissions during Nd:YAG laser welding of AA5182, pp. 11-17 [CDROM] in ICALEO 2004 (ISBN 0-912035-77-3) San Francisco, USA, October, 4-7, 2004. EM, NIMR.
wa0954 H. Super, G. Nijsse, J. van Dijk, J.B. Jonker, Virtual Sensors and Active Vibration Control on a Six-Degrees-of-Freedom Vibration Isolation Set-up, pp. 80 in Book of Abstracts 23rd Benelux Meeting on Systems and Control, Ed. Bram de Jager, Vincent Verdult (ISBN 90-386-2955-9) Helvoirt, Technische Universiteit Eindhoven, March 17-19, 2004. EM, TIM.
wa0955 G. Nijsse, H. Super, J. van Dijk, J.B. Jonker, Feedback Control of Broadband Disturbances on a One-Degree-of-Freedom Experimental Vibration Isolation Set-up, pp. 95 in Book of Abstracts 23rd Benelux Meeting on Systems and Control, Ed. Bram de Jager, Vincent Verdult (ISBN 90-386-2955-9) Helvoirt, Technische Universiteit Eindhoven, March 17-19, 2004. EM, TIM.
wa0959 H. Battjes, Errors caused by Linearization in the Simulation of Linear Time Varying Systems, Report no. wa0959, October, 2004. NIMR, EM.
wa0960 M.K. Post, Algorithms for suppression of tonal disturbances on a six-degrees-of-freedom vibration isolation set-up, Report no. wa0960, October, 2004.
wa0961 K. H. Choi, J. Meijer, T. Masuzawa, D.-H. Kim, Eximer Laser Micromachining for 3D Microstructure, Journal of Materials Processing Technology (ISSN 0924-0136) 149 (1-3) pp. 561-566 (2004). IPV.
wa0962 D.F. de Lange, High Power CO2 Laser Cutting, The Industrial Laser User (ISSN 1366-963X) 35 pp. 30-31 (2004). NIMR, EM.
wa0963 A. Schoonderbeek, C.A. Biesheuvel, R.M. Hofstra, K.-J. Boller, J. Meijer, The Influence of the Pulse Length on the Drilling of Metals with an Excimer Laser, Journal of Laser Applications (ISSN 1042-346X) 16 (2) pp. 85-91 (2004). IPV.
wa0964 G.W. van der Poel, Laser welding copper-nickel, report task 3, Report no. wa0964, October, 2003.
wa0965 H.J.C. Ransijn, Bepaling van procesvenster bij het lasersnijden met de Nd:YAG laser i.c.m. WSH station, Report no. wa0965, October, 2004.
wa0966 J. Olde Benneker, Lasersnijden aramide vezel (confidential), Report no. wa0966, December, 20, 2004. NIMR.
wa0967 N.S. Karlitskaya, D.F. de Lange, R. Sanders, J. Meijer, Study of laser die release by Q-switched Nd:YAG laser pulses, pp. 935-943 in Proceedings of SPIE, Ed. Bellingham (ISBN 0-8194-5371-4) Taos, New Mexico, USA, SPIE, April, 25-30, 2004. IPV.
wa0968 M. Lentjes, K. Dickmann, J. Meijer, Controlled laser cleaning and ablation by laser induced plasma emission analysis via miniature spectrometer, pp. 803-810 in Proceedings of the 4th LANE 2004, Ed. M. Geiger, A. Otto (ISBN 3-87525-202-0) Erlangen, Germany, September, 21-24, 2004. IPV.
wa0969 H. Dyck, N. Munser, M. Lentjes, K. Dickmann, Laser-Präzisionsbearbeitung von Saphir, Laser Technik Journal (ISSN 1613-7728) 1 (1) pp. 21-22 (2004). IPV.
wa0970 J.P. Kruth, L. Froyen, J. Vaerenbergh,P. Mercelis, M. Rombouts, B. Lauwers, Selective laser melting of iron-based powder, Journal of Materials Processing Technology (ISSN 0924-0136) 149 (1-3) pp. 616-622 (2004). IPV.
wa0971 J.P. Kruth, S. Kumar, J. Vaerenbergh, P. Mercelis,, Comparison of selective laser sintering of various iron-based powders, pp. 247-251 in Proceedings of the 3rd International Conference and Exhibition on Design and Production of Dies and Molds (ISBN 975-429-213-2) Bursa, Turkey, MATIM Mechanical Design and Production Society, June, 17-19, 2004. IPV.
wa0972 J.P. Kruth, A.D. Ludovico, S.L. Campanelli, M. Rombouts, J. Vaerenbergh, Statistical optimisation of selective laser sintering of metal powders, No pages in Proceedings of the 4th CIRP International Seminar on ICME (No ISBN or ISSN) Sorrento, Italy, June, 30- July, 2, 2004. IPV.
wa0973 J.P. Kruth, J. Vaerenbergh,P. Mercelis, B. Lauwers, I. Naert, Dental Protheses by means of Selective Laser Sintering, pp. S4-S5 in Proceedings les 10emes Assises europeennes du Prototypage rapide (No ISBN or ISSN) Paris, France, September, 14-15, 2004. IPV.
wa0974 J.P. Kruth, L. Froyen, S. Kumar, M. Rombouts, J. Vaerenbergh, Study of Laser-Sinterability of iron-based powder mixture, pp. S3-S8 in Proceedings les 10emes Assises europeennes du Prototypage rapide (No ISBN or ISSN) Paris, France, September, 14-15, 2004. IPV.
wa0975 M. Rombouts, L. Froyen, J.P. Kruth, J. Vaerenbergh, P. Mercelis, Production and properties of dense iron-based parts produced by laser melting with plasma formation, pp. 115-121 in Proceedings PM2004 (ISBN 1-899072-15-2) Vienna, Austria, EPMA, Scewsbury, UK, October, 17-21, 2004. IPV.
wa0976 V.T. Nduba, Image stabilisation, the key to a sound Head Mounted Display, Report no. wa0976, January, 2004.
wa0977 D.F. de Lange, Unsteady Meltpool and Keyhole Modelling for Laser Welding (confidential), Report no. wa0977, October, 21, 2004. IPV, NIMR, EM.
wa0978 A.P. Duindam, The design and implementation of an adaptive broadband feedback controller on a six-degrees-of-freedom vibration isolation set-up, Report no. wa0978, February, 2005. Impact, EM, DISC.
wa0979 T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, Modelling and Identification of Robots with Joint and Drive Flexibilities, pp. 173-182 in IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, Ed. H. Ulbrich and W. Günthner (ISBN 1-4020-4160-8) München, Springer, Dordrecht, The Netherlands, July 18-22, 2005. NIMR, Impact, EM, DISC. See also: http://purl.org/utwente/52668.
wa0980 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Lifted system iterative learning control applied to an industrial robot, pp. 26 in Book of Abstracts 24th Benelux Meeting on Systems and Control, Ed. Laurent Catoire, Michel Kinnaert and Alain Vande Wouwer (No ISBN or ISSN) Houffalize, Belgium, March, 22-24, 2005. NIMR, Impact, EM, DISC. See also: http://purl.org/utwente/52651.
wa0981 M. Lentjes, D. Klomp, K. Dickmann, Sensor Concept for Controlled Laser Cleaning via Photodiode, pp. 427-433 in Lasers in the Conservation of Artworks, Proceedings of the LACONA V, Ed. K. Dickmann, C. Fotakis and J.F Asmus (ISBN 3-540-22996-5, ISSN 0930-8989) Osnabrück, Springer Berlin Heidelberg New York, 2005. Impact, IPV. See also: http://purl.org/utwente/52652.
wa0982 Tj. van der Poel, J. Meijer, Laser als innovatielocomotief, Metaal & Techniek (ISSN 0026-0479) 50 (1) pp. 13-16 (2005). IPV.
wa0983 J.D. Hol, Sensor Fusion for Camera Pose Estimation, Report no. wa0983, June, 2005.
wa0984 Tj. van der Poel, Research and Technology: CONIHEX final report, Report no. wa0984, May, 2005. IPV, vertrouwelijk.
wa0985 G. Brendel, Design of a wide bandwidth 2D scanning mirror, Report no. wa0985, May, 2005. Impact, DISC.
wa0986 M. Kruizinga, Design of a sub nm stable large angle rotation stage for application in a TEM, Report no. wa0986, June, 2005. Impact, EM, DISC.
wa0987 R.G.K.M. Aarts, J. van Dijk, Systeem- en regeltechniek 1 (Lecture notes 280214/113115 Dutch), Report no. wa0987, April, 2005.
wa0988 H.J. During, Development and implementation of a real-time seam teaching algorithm, Report no. wa0988, June, 2005. Impact, IPV, EM, DISC.
wa0989 F. van der Velde, Development of an automatic calibration procedure for the sensor TCP, Report no. wa0989, June, 2005. Impact, IPV, EM, DISC.
wa0990 H.J.C. Ransijn, Adaptive feed-forward control based on friction identification for the Stäubli RX90 robot, Report no. wa0990, June, 2005. NIMR, Impact, EM, DISC.
wa0991 C.J. Nieuwenhuis, Design of an observer for the Stäubli RX90 robot, Report no. wa0991, June, 2005. NIMR, Impact, EM, DISC.
wa0992 K. Dickmann, M. Lentjes, J. Meijer, Online Diagnostics for Laser Cleaning of Artworks, pp. 1 [CD-ROM, CSI2-4-THU] in Europhysics Conference Abstracts Volume 29B: CLEO EUROPE EQEC 2005 (ISSN 0378-2271) Munich, Germany, June, 12-17, 2005. Impact, IPV. See also: http://purl.org/utwente/53871.
wa0993 M. Lentjes, K. Dickmann, J. Meijer, Prozessüberwachung beim Laserreinigen und Laserschichtabtrag durch Anwendung der Plasmaanalyse mittels "low resolution" Spektrometer, pp. 288-293 in Proceedings 2nd Remagener Physiktage 2004, Ed. U. Hartmann, M. Kohl-Bareis, P. Hering, G. Lonsdale, J. Bongartz, T.M. Buzug (ISBN 3-8007-2838-9) No address, 2005. Impact, IPV. See also: http://purl.org/utwente/52653.
wa0994 M. Lentjes, K. Dickmann, J. Meijer, Prozesskontrolle bei der Laserreinigung durch Plasmaanalyse mittels niedrig auflösendem Spektrometer, Photonik (ISSN 1432-9778) 37 (3) pp. 84-87 (2005). Impact, IPV. See also: http://purl.org/utwente/52672.
wa0995 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, J. van Dijk, Sub-nanometer stable precision MEMS clamping mechanism maintaining clamp force un-powered for TEM application, pp. 1-4 [CDROM] in The 16th workshop on micromachining, micromechanics and microsystems (No ISBN or ISSN) Göteborg, September, 4-6, 2005. Impact, EM, DISC. See also: http://purl.org/utwente/52654.
wa0996 A. Schoonderbeek, C.A. Biesheuvel, R.M. Hofstra, K.-J. Boller, J. Meijer, Shadowgraphic imaging of material removal during laser drilling with a long pulse eximer laser, Applied Physics A - Materials Science&Processing (ISSN 0947-8396) 80 (4) pp. 769-775 (2005). Impact, IPV. See also: http://purl.org/utwente/52650.
wa0997 D.F. de Lange, J.T. Hofman, J. Meijer, Influence of intensity distribution on the meltpool and clad shape for laser cladding, pp. 323-327 in Proceedings of the third International WLT-conference on Lasers in Manufacturing, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. NIMR, Impact, IPV, EM. See also: http://purl.org/utwente/52655.
wa0998 N.S. Karlitskaya, J. Meijer, D.F. de Lange, R. Sanders, Laser-induced transfer process for die assembly, pp. 669-672 in Proceedings of the third International WLT-conference on Laser in Manufacturing, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. Impact, IPV.
wa0999 M.W. de Graaf, R.G.K.M. Aarts, J. Meijer and J.B. Jonker, Robot-sensor synchronization for real-time seam-tracking in robotic laser welding, pp. 419-424 in Proceedings of the third International WLT-conference on Lasers in Manufacturing, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. Impact, IPV, EM, DISC. See also: http://purl.org/utwente/52662.
wa1000 D. Iakovou, R.G.K.M Aarts, J. Meijer, Integrated sensors for robotic laser welding, pp. 121-126 in Proceedings of the third International WLT-conference on Lasers in Manufacturing, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. Impact, IPV, EM. See also: http://purl.org/utwente/52664.
wa1001 B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Weld Plume Emissions During Nd:YAG Laser Welding, pp. 413-417 in Proceedings of the third International WLT-conference on Lasers in Manufacturing, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. NIMR, Impact, EM. See also: http://purl.org/utwente/52666.
wa1002 G. Nijsse, J. van Dijk and J.B. Jonker, The multiple reference principle component least mean squares algorithm: a projection based approach, pp. 133-136 in Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing, Vol IV (ISBN 0-7803-8484-9, ISSN 1520-6149) Montreal, Quebec, Canada, May, 2004. TIM, EM, DISC.
wa1003 G. Nijsse, J. van Dijk and J.B. Jonker, Feedback control of broadband disturbances on a one-degree-of-freedom vibration isolation set-up, pp. 225-237 in ISMA2004: International Conference on Noise and Vibration Engineering, Ed. P. Sas, M. de Munck (ISBN 90-73802-82-2) Leuven, Belgium, September 20-22, 2004. TIM, EM, DISC.
wa1004 G. Nijsse, H. Super, J. van Dijk and J.B. Jonker, Feedforward control of broadband disturbances on a six-degrees-of-freedom vibration isolation set-up, pp. 1-8 in ACTIVE 2004: The 2004 International Symposium on Active Control of Sound and Vibration (No ISBN or ISSN) Williamsburg, Virginia, USA, September 20-22, 2004. TIM, EM, DISC.
wa1005 Rob Waiboer, Ronald Aarts and Ben Jonker, Velocity dependence of joint friction in robotic manipulators with gear transmissions, pp. 1-19 [CDROM] in ECCOMAS Thematic Conference Multibody Dynamics 2005, Advances in Computational Multibody Dynamics (No ISBN or ISSN) Madrid, Spain, June 21-24, 2005. NIMR, Impact, EM. See also: http://purl.org/utwente/52669.
wa1006 Rob Waiboer, Ronald Aarts and Ben Jonker, Modelling and identification of a six axes industrial robot, pp. 1-10 [CDROM] in ASME International Design Engineering Technical Conferences IDETC/CIE (No ISBN or ISSN) Long Beach (CA) USA, September 24-28, 2005. NIMR, Impact, EM. See also: http://doc.utwente.nl/52670.
wa1007 F. Vollertsen, K. Partes, J. Meijer, State of the art of laser hardening and cladding, pp. 281-305 in Proceedings of the Third International WLT-Conference on Lasers in Manufacturing 2005, Ed. E. Beyer, F. Dausinger, A. Ostendorf, A. Otto (ISBN 3-00-016402-2) Munich, Germany, AT-Fachverlag GmbH, Stuttgart 2005, June, 14-17, 2005. NIMR, Impact, IPV. See also: http://purl.org/utwente/52667.
wa1008 B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Experimental observations of the laser keyhole welding process of AA5182, pp. 832-836 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31 - November 3, 2005. NIMR, Impact, EM. See also: http://purl.org/utwente/52896.
wa1009 M.W. de Graaf, J. Olde Benneker, R.G.K.M. Aarts, J. Meijer, J.B. Jonker, Robust process-controller for Nd:YAG welding, pp. 862-868 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31 - November 3, 2005. NIMR, Impact, IPV, EM, DISC. See also: http://purl.org/utwente/52897.
wa1010 M. Groenendijk, J. Meijer, Microstructuring using femtosecond pulsed laser ablation, pp. M219-M225 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31 - November 3, 2005. Impact, IPV. See also: http://purl.org/utwente/52898.
wa1011 D. Iakovou, R.G.K.M. Aarts, J. Meijer, Sensor integration for robotic laser welding processes, pp. 886-894 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31 - November 3, 2005. Impact, IPV, EM. See also: http://purl.org/utwente/52899.
wa1012 D.F. de Lange, J.T. Hofman, J. Meijer, Optical characteristics of Nd:YAG optics and distortions at high power, pp. 745-754 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31 - November 3, 2005. NIMR, Impact, IPV, EM. See also: http://purl.org/utwente/52901.
wa1013 J.O. Entzinger, A flexible seam detection technique for robotic laser welding, Report no. wa1013, September, 2005. Impact, IPV, EM.
wa1014 J.A.J. Brand, DYNASIT - Design of a dynamic seating system for wheelchairs, Report no. wa1014, October, 2005. Impact, DISC.
wa1015 L.I. van Wuyckhuijse, Ontwerp van een nauwkeurig continu aanvoersysteem voor microproducten, Report no. wa1015, October, 2005. Impact, DISC.
wa1016 H. Super, G. Nijsse, J. van Dijk, J.B. Jonker, A hybrid vibration isolation approach demonstrated by a six-degrees-of-freedom vibration isolation set-up, No pages in ACTIVA2004: The 2004 International Symposium on Active Control of Sound and Vibration (No ISBN or ISSN) Williamsburg, Virginia, USA, September, 20-22, 2004. TIM, EM, DISC.
wa1017 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Lifted system iterative learning control applied to an industrial robot, Control Engineering Practice (ISSN 0967-0661) 16 (4) pp. 377-391 (2008). M2i, Impact, EM, DISC. DOI: 10.1016/j.conengprac.2007.05.002.
wa1018 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Iterative learning control for improved end-effector accuracy of an industrial robot, pp. 151-156 in 8th International IFAC Symposium on Robot Control - SYROCO 2006 (No ISBN or ISSN) Bologna, Italy, September, 6-8, 2006. NIMR, Impact, EM, DISC. DOI: 10.3182/20060906-3-IT-2910.00027.
wa1019 Menno de Graaf, Ronald Aarts, Ben Jonker and Johan Meijer, Real-time trajectory generation for sensor-guided robotic laser welding, pp. 6 on CDRom in 8th International IFAC Symposium on Robot Control - SYROCO 2006 (No ISBN or ISSN) Bologna, Italy, September, 6-8, 2006. Impact, IPV, EM, DISC.
wa1020 J.P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, M. Rombouts, Binding Mechnisms in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyping Journal (ISSN 1355-2546) 11 (1) pp. 26-36 (2005). Impact, IPV. See also: http://purl.org/utwente/52894.
wa1021 J.P. Kruth, B. Vandenbroucke, J. Van Vaerenbergh, P. Mercelis, Benchmarking of different SLS/SLM processes as Rapid Manufacturing techniques, pp. paper 525 in International Conference Polymers & Moulds Innovations PMI (No ISBN or ISSN) Gent, Belgium, April, 20-23, 2005. Impact, IPV. See also: http://purl.org/utwente/52902.
wa1022 A. Voet, J. Dehaes, J. Mingneau, J.P. Kruth, J. Van Vaerenbergh, Laser Sintered Injection Moulds, case studies made in Belgium, pp. paper 534 in International Conference Polymers & Moulds Innovations PMI (No ISBN or ISSN) Gent, Belgium, April, 20-23, 2005. Impact, IPV. See also: http://purl.org/utwente/52903.
wa1023 A. Voet, J. Mingneau, J. Dehaes, J.P. Kruth, J. Van Vaerenbergh, tudy of the Wear Behaviour of Conventional and Rapid Tooling Mould Materials, pp. paper 517 in International Conference Polymers & Moulds Innovations PMI (No ISBN or ISSN) Gent, Belgium, April, 20-23, 2005. Impact, IPV. See also: http://purl.org/utwente/52904.
wa1024 J.P. Kruth, B. Vandenbroucke, J. Van Vaerenbergh, I. Naert, Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM, pp. 139-145 in 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, VRAP 2005 (ISBN 0-415-39062-1, ISSN 1745-2759) Leiria, Portugal, Taylor & Francis/Balkema, September, 28-October 1, 2005. Impact, IPV. See also: http://purl.org/utwente/52913.
wa1025 J.P. Kruth, B. Vandenbroucke, J. Van Vaerenbergh, I. Naert, Rapid Manufacturing of Dental Prostheses by means of Selective Laser Sintering/Melting, pp. S4 in Les 11emes Assises europeennes du Prototypage rapide, AFPR (Association Francaise de Prototypage Rapide) (No ISBN or ISSN) Paris, France, October, 4-5, 2005. Impact, IPV. See also: http://purl.org/utwente/52914.
wa1026 Raph Pieters, Ronald Aarts, Rob Waiboer, Jeroen Olde Benneker, Final report NIMR project MC8.00073, Laser welding of steel, Report no. wa1026, 2006. NIMR, Impact, EM.
wa1027 J.P. Kruth, S. Kumar, J. Vaerenbergh, Study of Laser-Sinterability of Ferro-based Powders, Rapid Prototyping Journal (ISSN 1355-2546) 11 (5) pp. 287-292 (2005). Impact, IPV.
wa1028 R.G.K.M. Aarts, J. van Dijk, Inleiding Systeem- en regeltechniek - deel 1 (Lecture notes 113117, in Dutch), Report no. wa1028, October, 2005.
wa1029 R.G.K.M. Aarts, Systeem identification and Parameter estimation (Lecture notes 113170), Report no. wa1029, February, 2006.
wa1030 J.B. Jonker, R.G.K.M. Aarts and R.R. Waiboer, Modelling of joint friction in robotic manipulators with gear transmissions, pp. To appear in Multibody Dynamics - Computational Methods and Applications. Vol. 4 of Computational Methods in Applied Sciences, Ed. J.C. Garcia Orden, Jose M. Goicolea, J. Cuadrado, 978-1-4020-5683-3, Springer, 2007. NIMR, Impact, EM.
wa1032 G. Kramer, Design of an improved arm gripper, Report no. wa1032, November, 2005. Impact, DISC.
wa1033 J.M. Jauregui, Implementation and testing of a control scheme for laser welding, Report no. wa1033, January, 2006. NIMR, Impact, EM.
wa1034 M. Lentjes, K. Dickmann, J. Meijer, Controlled Laser Cleaning of Artworks via Low Resolution LIBS and Linear Correlation Analysis, pp. M286-M292 [CDROM] in ICALEO 2005, Ed. Andreas Ostendorf, Anthony Hoult, Yongfeng Lu (ISBN 0-912035-82-X) Miami (FL), USA, October 31- November 3, 2005. Impact, IPV. See also: http://purl.org/utwente/53870.
wa1035 D. Knapp, M. Lentjes, K. Dickmann, H. Dyck, N. Munser, Herstellung von Freiformflächen aus transparenten Materialien mit Nd:YAG- Laserstrahlung, Laser Magazin (No ISSN) pp. 7-10 (2005). Impact, IPV.
wa1036 M. Lentjes, K. Dickmann, J. Meijer, Low resolution LIBS for online-monitoring during laser cleaning based on correlation with reference spectra, pp. To be published in LACONA VI (September, 21-25, 2005) (No ISBN or ISSN) Vienna, Austria, 2006. Impact, IPV.
wa1037 Menno de Graaf, Ronald Aarts, Ben Jonker and Johan Meijer, Real-time seam tracking for robotic laser welding, pp. 107 in Book of Abstracts 25th Benelux Meeting on Systems and Control, Ed. Bram de Jager and Gjerrit Meinsma (ISBN 90-386-2558-8) Heeze, The Netherlands, March, 13-15, 2006. Impact, IPV, EM, DISC.
wa1038 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Iterative Learning Control for Linear Time-Varying systems with application to an industrial robot, pp. 32 in Book of Abstracts 25th Benelux Meeting on Systems and Control, Ed. Bram de Jager and Gjerrit Meinsma (ISBN 90-386-2558-8) Heeze, The Netherlands, March, 13-15, 2006. NIMR, Impact, EM, DISC.
wa1039 Toon Hardeman, Ronald Aarts, Johannes van Dijk and Ben Jonker, A scanning mirror for robotic laser welding, pp. 143 in Book of Abstracts 25th Benelux Meeting on Systems and Control, Ed. Bram de Jager and Gjerrit Meinsma (ISBN 90-386-2558-8) Heeze, The Netherlands, March, 13-15, 2006. NIMR, Impact, EM, DISC.
wa1040 G.W. van der Poel, J. van Dijk, J.B. Jonker and H.M.J.R. Soemers, Design of a smart mount for vibration isolation in high-precision machinery, pp. 77 in Book of Abstracts 25th Benelux Meeting on Systems and Control, Ed. Bram de Jager and Gjerrit Meinsma (ISBN 90-386-2558-8) Heeze, The Netherlands, March, 13-15, 2006. Impact, EM, DISC.
wa1041 J. Hiemstra, Iterative Controller Tuning for Broadband Feedforward Active Vibration Isolation Control, Report no. wa1041, March, 2006. Impact, EM, DISC.
wa1042 J. van Dijk, Systeem- en regeltechniek 2 (Lecture notes 113116, in Dutch), Report no. wa1042, January, 2006.
wa1043 J.A. Deijnen, Modeling leaf springs in MEMS, Report no. wa1043, February, 2006. Impact, EM, DISC.
wa1044 M.B Rensen, Development and implementation of a real-time seam tracking algorithm, Report no. wa1044, February, 2006. Impact, IPV, EM, DISC.
wa1045 J. Caanen, Camera based sensor system for hybrid laser/MIG welding of aluminium - Investigation of gap bridging capabilities, Report no. wa1045, February, 2006. NIMR, Impact, EM.
wa1046 J. Veenstra, Improved Gap Tolerance for Laser Welding of Aluminum Using Twin Spot Techniques, Report no. wa1046, March, 2006. NIMR, Impact, EM.
wa1047 Gerard Nijsse, A subspace based approach to the design, implementation and validation of algorithms for active vibration isolation control, 90-365-2319-2, University of Twente, February, 9, 2006. Impact, EM, DISC. See also: http://purl.org/utwente/51108.
wa1048 G. Nijsse, H. Super, J. van Dijk, J.B. Jonker, A robust subspace based approach to feedforward control of broadband disturbances on a six-degrees-of-freedom vibration isolation set-up, Noise control engineering journal (ISSN 0736-2501) 53 (5) pp. 208-215 (2005). Impact, EM, DISC. See also: http://purl.org/utwente/53990.
wa1049 G. Nijsse, A.P. Berkhoff, A filter apparatus for actively reducing noise, University of Twente, TNO Science and Industry, P74620P00, 2006. Impact, EM.
wa1050 B.P.C. Moonen, Alternatief ontwerp van een piëzo-actuator voor een inkjet printkop, Report no. wa1050, February, 2006. Impact, DISC.
wa1051 F.W. Ploegman, Femtosecond pulsed laser ablation of small grooves on a steel sphere, Report no. wa1051, March, 2006. Impact, IPV.
wa1052 M.N.W. Groenendijk, J. Meijer, Surface Microstructures obtained by Femtosecond Laser Pulses, CIRP Annals 2006 (ISSN 0007-8506) 55 (1) pp. 183-186 (2006). Impact, IPV.
wa1053 N. Karlitskaya, J. Meijer, D.F. de Lange, H. Kettelarij, Laser propulsion of microelectronic components: releasing mechanism investigation, pp. 62612P 1-10 in Proceedings of SPIE, Ed. Claude R. Phipps (ISBN 0-8194-6326-4, ISSN 0277-786X) Bellingham, USA, May, 7-12, 2006. NIMR, Impact, IPV.
wa1054 J.B. Jonker, R.G.K.M. Aarts, J. van Dijk, Flexible Multibody System Analysis for Control Purposes (DISC Lecture notes), Report no. wa1054, September, 2007. DISC.
wa1055 G.W. van der Poel, J. van Dijk, J.B. Jonker, H.M.J.R. Soemers, Control design for hard mount vibration isolation in high-precision machinery, pp. 8 [CDROM] in Proceedings of the Thirtheenth International Congress on Sound and Vibration (ICSV13), Ed. J. Eberhardsteiner, H.A. Mang, H. Waubke (ISBN 3-9501554-5-7) Vienna, Austria, Vienna University of Technology, Austria, July, 2-6, 2006. Impact, EM, DISC.
wa1056 A. Schenk, Het ontwerp en de realisatie van een roterende piëzomotor, Report no. wa1056, June, 2006. Impact, DISC.
wa1057 M. Scholts, Het ontwerp van een laserscanner, Report no. wa1057, June, 2006. Impact, IPV.
wa1058 R.G.K.M. Aarts, J.B. Jonker, SPACAR-manual 2006, Report no. wa1058, May, 2006. NIMR, Impact, EM.
wa1059 N. Karlitskaya, J. Meijer, D.F. de Lange, H. Kettelarij, Laser-assisted micro components assembly: releasing control and placement accuracy improvement investigation, No pages in Proceedings of the 4th Int. Congress on Laser Advanced Materials Processing (No ISBN or ISSN) Kyoto, Japan, May, 16-19, 2006. NIMR, Impact, IPV.
wa1061 I. Scheringa, Modelling and analysis of geometric drive train non linearities in the Stäubli RX90 robot, Report no. wa1061, September, 2006. Impact, EM.
wa1062 A.J. den Hollander, Implementation of a vision system for femtosecond laser pulsed materials processing, Report no. wa1062, July, 2006. Impact, IPV.
wa1063 B.J. Aalderink, D.F. de Lange, R.G.K.M. Aarts and J. Meijer, Experimental verfification of multi-physical modelling of the keyhole laser welding process, pp. 479-486 [CDROM] in ICALEO 2006, Ed. Andreas Ostendorf, Paul Hilton, Yongfeng Lu (ISBN 0-912035-85-4) Scottsdale (AZ)), USA, October 30 - November 2, 2006. NIMR, Impact, EM.
wa1064 J. van Tienhoven, P. Pathiraj, J. Meijer, Laser joining of steel-aluminum joints in T configuration, pp. 52-58 [CDROM] in ICALEO 2006, Ed. Andreas Ostendorf, Paul Hilton, Yongfeng Lu (ISBN 0-912035-85-4) Scottsdale, (AZ), USA, October, 30 - November 2, 2006. NIMR.
wa1065 M.N.W. Groenendijk, J. Meijer, Microstructuring using femtosecond pulsed laser ablation, Journal of Laser Applications (ISSN 1042-346X) 18 (3) pp. 227-235 (2006). Impact, IPV.
wa1066 M.N.W. Groenendijk, J. Meijer, Influence of the repetition rate on self organized surface structuring during femtosecond pulsed laser ablation, pp. M127-M134 [CDROM] in ICALEO 2006, Ed. Andreas Ostendorf, Paul Hilton, Yongfeng Lu (ISBN 0-912035-85-4) Scottsdale, (AZ), USA, October, 30 - November 2, 2006.
wa1067 J.T. Hofman, D.F. de Lange, J. Meijer, Camera based feedback control of the laser cladding process, pp. 456-460 [CDROM] in ICALEO 2006, Ed. Andreas Ostendorf, Paul Hilton, Yongfeng Lu (ISBN 0-912035-85-4) Scottsdale, (AZ), USA, October, 30 - November 2, 2006. NIMR, Impact, EM.
wa1068 J.T. Hofman, J. Meijer, Werkwijze en samenstel voor het door laseroplassen opbrengen van een laag, NIMR, 2000155, 26 July, 2006. NIMR.
wa1069 A. Cremers, Dynamic simulation of a Stäubli RX90 robot with on-the-fly linearization, Report no. wa1069, September, 2006. NIMR, Impact, EM.
wa1071 M.N.W. Groenendijk, J. Meijer, Surface microstructuring and the influence of heat accumulation during femtosecond pulsed laser ablation, pp. 5 in Proceedings of the 4th International Congress on Laser Advanced Materials Processing (No ISBN or ISSN) Kyoto, Japan, May, 16-19, 2006. Impact, IPV.
wa1072 I. Scheringa, Verificatie van de camerakalibratie van het Krypton Rodym 6D Camerasysteem, Report no. wa1072, July, 2006. Impact, EM.
wa1073 A.P. Berkhoff, G. Nijsse, A rapidly converging filtered-error algorithm for multichannel active noise control, International Journal of Adaptive Control and Signal Processing (ISSN 0890-6327) 21 (7) pp. 556-569 (2007). Impact, EM, DISC.
wa1074 P. Mercelis, J.P. Kruth, J. Van Vaerenbergh, Feedback control of selective laser melting, No pages in Proceedings of the 15th International Symposium on Electromachining (ISEM XV) (ISBN 978-0-9794977-0-4) Pittsburgh, Pennsylvania, USA, April, 23-27, 2007. Impact, IPV.
wa1075 J. Entzinger, D. Iakovou, R.G.K.M. Aarts, J. Meijer, Improving coaxial measurements in laser welding by correcting distortions of a laser focus lens with a wide field of view, Journal of Laser Applications (ISSN 1042-346X) 19 (3) pp. 141-148 (2007). Impact, IPV, EM.
wa1076 D.F. de Lange, Unsteady meltpool and keyhole modelling for laser welding - final report -, Report no. wa1076, September, 30, 2006. NIMR, Impact, IPV, EM.
wa1077 R.G.K.M. Aarts, J. van Dijk, Inleiding Systeem- en regeltechniek (Lecture notes 113117, 113115 and 280214, in Dutch), Report no. wa1077, October, 2006.
wa1078 M. Lentjes, K. Dickmann, J. Meijer, Kontrollierter Mikroabtrag an Schichtsystemen mittels Laserstrahlung und online Plasma Spektroskopie (LIPS), J. Univers. appl. sci. Mittweida (ISSN 1437-7634) 5 pp. 87-91 (2006). Impact, IPV.
wa1080 G.W. van der Poel, J. van Dijk, J.B. Jonker, H.M.J.R. Soemers, Improving the vibration isolation performance of hard mounts, No pages in Proceedings of PACT2007 (No ISBN or ISSN) Hilvarenbeek, the Netherlands, February, 6-7, 2007. Impact, EM, DISC.
wa1081a F. Vollertsen, K. Partes, J. Meijer, State of the Art in Laser Hardening and Cladding. Part 1, The Industrial Laser User (ISSN 1366-963X) 43 pp. 30-33 (2006). Impact, IPV.
wa1081b F. Vollertsen, K. Partes, J. Meijer, State of the Art in Laser Hardening and Cladding. Part 2, The Industrial Laser User (ISSN 1366-963X) 44 pp. 30-33 (2006). Impact, IPV.
wa1081c F. Vollertsen, K. Partes, J. Meijer, State of the Art in Laser Hardening and Cladding. Part 3 - Laser cladding, The Industrial Laser User (ISSN 1366-963X) 45 pp. 30-32 (2006). Impact, IPV.
wa1082 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, J. van Dijk, Sub-nanometer stable precision MEMS clamping mechanism maintaining clamp force unpowered for TEM application, Journal of Micromechanics and Microengineering (ISSN 0960-1317) 16 (6) pp. 7-12 (2006). Impact, EM, DISC.
wa1083 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, Design and modelling of a precision 6 degrees-of-freedom MEMS-based parallel kinematic TEM sample manipulator, pp. 115-118 in Proceedings of the Annual Meeting of the American Society of Precision Engineering (ASPE) (No ISBN or ISSN) Monterey CA, USA, October, 15-20, 2006. Impact, EM, DISC.
wa1084 D.M. Brouwer, B.R. de Jong, M.J. de Boer, H.M.J.R. Soemers, Rotational precision MEMS-based clamping mechanism for stable fixation of elastic mechanisms, pp. 275-278 in Proceedings of the Annual Meeting of the American Society of Precision Engineering (ASPE) (No ISBN or ISSN) Monterey CA, USA, October, 15-20, 2006. Impact, EM, DISC.
wa1085 J. Meijer, Lasers in today's Manufacturing, pp. 279-286 in Proceedings International Conference on Competitive Manufacturing, COMA '07, Ed. Dimitri Dimitrov (ISBN 0-7972-1164-0) Stellenbosch, South Africa, 31 January - 2 February, 2007. Impact, IPV.
wa1086 B.J. Aalderink, R.G.K.M. Aarts, D. F. de Lange and J. Meijer, Experimental Observation of Keyhole Shapes in the Laser Welding of Aluminium Blanks, Journal of Laser Applications (ISSN 1042-346X) 19 (4) pp. 245-251 (2007). NIMR, Impact, EM.
wa1087 M. Lentjes, K. Dickmann, J. Meijer, Influence of process parameters on the distribution of single shot correlation coefficient obtained by correlating LIB-Spectra, Applied Physics A: Materials Science & Processing (ISSN 0947-8396) 88 (4) pp. 661-666 (2007). Impact, IPV. DOI: 10.1007/s00339-007-4023-8.
wa1088 M. Lentjes, K. Dickmann, J. Meijer, Calculation and optimization of sample identification by laser induced breakdown spectroscopy via correlation analysis, Spectrochimica Acta Part B: Atomic Spectroscopy (ISSN 0584-8547) 62 (1) pp. 56-62 (2007). Impact, IPV. DOI: 10.1016/j.sab.2006.11.009.
wa1089 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Iterative learning control with an identified time-varying robot model, pp. 140 in Book of Abstracts 26th Benelux Meeting on Systems and Control, Ed. Jan Swevers, Johan Schoukens, Rik Pintelon, Patrick Guillaume, Jan Van Impe, Ilse Smets, Bram Demeulenaere and Bart De Moor (ISBN 978-90-738-0284-1) Lommel, Belgium, March, 13-15, 2007. NIMR, Impact, EM, DISC.
wa1090 R.G.K.M. Aarts, Systeem identification and Parameter estimation (Lecture notes 113170), Report no. wa1090, March, 2007.
wa1091 J. Olde Benneker, A. Gales, Laserlassen vs. conventionele lastechnieken Een vergelijking van lastechnieken voor kleine series producten (voorbereidingstraject)(TI.07.34)(projectcode: PKS), No isbn, Vereniging FME-CWM, February, 2007. NIMR.
wa1092 R.G.K.M. Aarts, System Identification for Identification of human motion control (Lecture notes 381007), Report no. wa1092, March, 2007. Impact, EM.
wa1093 R.R. Waiboer, Dynamic modelling, identification and simulation of industrial robots for off-line programming of robotised laser welding, 978-90-77172-25-4, Universiteit Twente, February, 14, 2007. NIMR, Impact, EM. See also: http://doc.utwente.nl/57838/.
wa1094 M.A. Smits, Modelling and analysis of A412 boat elevator, Report no. wa1094, March, 14, 2007. Impact, DISC.
wa1095 R.G.K.M. Aarts and J.B. Jonker, SPACAR-manual 2007, Report no. wa1095, March, 2007. NIMR, Impact, EM, DISC.
wa1096 J.J.G. Vennegoor op Nijhuis, Development of a pipe inspection robot, Report no. wa1096, May, 16, 2007. Impact, DISC.
wa1097 V. Kovalenko, L. Golovko, J. Meijer, M. Anyakin, New development in laser sintering of diamond cutting disks, CIRP annuals (ISSN 0007-8506) 56 (1) pp. 189-192 (2007). Impact, IPV.
wa1098 J.B. Jonker, R.G.K.M. Aarts, J. van Dijk, Prototype modelling of mechanic systems - An introduction for Project F, Report no. wa1098, 2007. Impact, EM, DISC.
wa1099 Rommert Politiek, Design of a 3D experimental vibration isolation setup with active hard mounts, Report no. wa1099, April, 2007. Impact, EM.
wa1100 H.M.J.R. Soemers, Mechatronics: Small is beautiful (but big is nice as well), No pages in Proceedings of the fourth International Symposium on Mechatronics and its Applications (ISMA07) (No ISBN or ISSN) Sharjah, United Arab Emirates, March, 26-29, 2007. Impact, DISC.
wa1101 J.G. Louwerse, Micromachining of a nozzle structure in silicon by femtosecond laser pulses, Report no. wa1101, May, 2007. Impact, IPV.
wa1102 J.B. Jonker, J. van Dijk, R.G.K.M. Aarts, An extended input-output representation for control synthesis in multibody system dynamics, pp. 1-20 in Multibody Dynamics 2007, ECCOMAS Thematic Conference, Ed. C.L. Bottasso, P. Masarati, L. Trainelli (No ISBN or ISSN) Milano, Italy, 25–28 June, 2007. NIMR, Impact, EM, DISC.
wa1103 H.M.J.R Soemers, Micro Mechatronics, No pages in Mechatronik 2007, Innovative Produktenentwicklung (ISBN 978-3-18-091971-3) Heidelberg, Germany, VDI Wissensformum, May, 23-24, 2007. DISC.
wa1104 B.J. Aalderink, R.G.K.M. Aarts, J. Meijer, Increased gap bridging capabilities using twin spot and hybrid laser/GMA welding for AA5182, pp. 79-83 in Proceedings of the Fourth International WLT-Conference on Lasers in Manufacturing 2007 (ISBN 978-3-00-021449-3) Munich, AT-Verlag, June, 18-22, 2007. NIMR, Impact, EM.
wa1105 J.M. Jauregui, B.J. Aalderink, R.G.K.M. Aarts, J. Olde Benneker, J. Meijer, Design, implementation and testing of a fuzzy control scheme for laser welding, Journal of Laser Applications (ISSN 1042-346x) 20 (3) pp. 146-153 (2008). M2i, Impact, EM, DISC.
wa1106 J. Olde Benneker, J.T. Hofman, Implementation of process controller for laser cladding, Report no. wa1106, June, 20, 2007. NIMR.
wa1108 M. Groenendijk, Het geheim van de lotus nagelaserd, Metaal & Techniek (ISSN 0026-0479) 52 (2) pp. 42 (2007). Impact, IPV.
wa1109 M. Groenendijk, Ultrakorte laserablatie creëert zelfreinigende oppervlakken, Metaalmagazine (ISSN 1574-9533) 45 (3) pp. 22-23 (2007). Impact, IPV.
wa1110 J. Olde Benneker, P. Hartgers, Inzet Lasertechnologie in Nederland voor kleine Series, Metaal & Techniek (ISSN 0026-0479) 52 (2) pp. 18 (2007). NIMR.
wa1111 B.J. Aalderink, D.F. de Lange, R.G.K.M. Aarts, J. Meijer, Keyhole shapes during laser welding of thin metal sheets, Journal of Physics D: Applied Physics (ISSN 0022-3727) 40 (17) pp. 5388-5393 (2007). NIMR, Impact, EM. DOI: 10.1088/0022-3727/40/17/057.
wa1112 D. Iakovou, R.G.K.M. Aarts, J. Meijer, Perimetric trajectory detection using distinctive structured light sources, University of Twente, EP07112850, July, 2007. Impact, IPV, EM.
wa1113 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Model-based iterative learning control applied to an industrial robot with elasticity, pp. 4185-4190 in Proceedings of the 46th IEEE Conference on Decision and Control (ISBN 978-1-4244-1498-7, ISSN 0191-2216) New Orleans (LA), USA, December, 12-14, 2007. NIMR, Impact, EM, DISC.
wa1114 D. Iakovou, R.G.K.M. Aarts, J. Meijer, J.B. Jonker, Perimetric sensor for the detection and following of complex seam tracectories in robotic laser welding, pp. 1049-1057 (cd-rom) in Proceedings of the ICALEO 2007, Ed. Paul Denney (ISBN 978-0-912035-88-8) Orlando (FL), USA, October 29-November 1, 2007. Impact, IPV, EM.
wa1115 J.T. Hofman, D.F. de Lange, J. Meijer, Investigation of meltpool characteristics and correlations during laser cladding using a finite element modelling approach, pp. 657-664 (cd-rom) in Proceedings of the ICALEO 2007, Ed. Paul Denney (ISBN 978-0-912035-88-8) Orlando (FL), USA, October 29-November 1, 2007. NIMR, Impact, EM.
wa1116 J.T. Hofman, B. Pathiraj, J. Meijer, Experimental investigation of residual stresses generated during laser cladding, pp. 953-960 (cd-rom) in Proceedings of the ICALEO 2007, Ed. Paul Denney (ISBN 978-0-912035-88-8) Orlando (FL), USA, October 29-November 1, 2007. NIMR, Impact, EM.
wa1117 M.W. de Graaf, R.G.K.M. Aarts, J. Meijer and J.B. Jonker, Ethernet-based communication framework for sensor integration on industrial robots, pp. 7 on CDRom in 1st International Conference on Robot Communication and Coordination - ROBOCOMM 2007 (ISBN 978-963-9799-08-0) Athens, Grece, October, 15 - 17, 2007. Impact, IPV, EM, DISC.
wa1118 W. Loch, Ontwerp van een Direct Die Feeder met geintegreerd laserproces, Report no. wa1118, September, 12, 2007.
wa1119 S. Kuiper, Vibration isolation based on floor measurements, Report no. wa1119, September, 28, 2007.
wa1120 K. Slagter, Calibratie van een externe manipulator, Report no. wa1120, October, 18, 2007.
wa1121 M. Groenendijk, Super-waterafstotende oppervlakken door ultrakorte gepulste laserablatie, Nederlands Tijdschrift voor Natuurkunde (ISSN 0926-4264) 73 (10) pp. 324-329 (2007). Impact, IPV, EM.
wa1122 J. Olde Benneker, Laserlassen van complexe producten (fabricagetraject)(TI.07.37), No isbn, Vereniging FME-CWM, November, 2007. NIMR.
wa1123 R.G.K.M. Aarts, J. van Dijk, Inleiding Systeem- en regeltechniek (Lecture notes 113117, 113115 and 280214, in Dutch), Report no. wa1123, October, 2007.
wa1124 S.A.M. Overkamp, Mechatronic Design of a Page Turner, Report no. wa1124, November, 21, 2007.
wa1125 J. van Pommeren, The Unibot: Design and control of a self-balancing unicycle robot, Report no. wa1125, December, 18, 2007.
wa1126 E. Ruinemans, Design of a piezo actuated control valve, Report no. wa1126, November, 29, 2007.
wa1127 D.M. Brouwer, Design Principles for Six Degrees-of-Freedom MEMS-based Precision Manipulators, 978-90-365-2510-7, June, 14, 2007. Impact, EM, DISC. See also: http://doc.utwente.nl/57871/.
wa1128 B.J. Aalderink, Sensing, Monitoring and Control of Laser Based Welding of Aluminium Sheets, 978-90-77172-31-5, October, 4, 2007. NIMR, EM. See also: http://doc.utwente.nl/58019/.
wa1129 J. Bosman, Processes and Strategies for Solid State Q-Switch Laser Marking of Polymers, 90-365-2346-X, October, 26, 2007. IPV. See also: http://doc.utwente.nl/58020/.
wa1130 M. Lentjes, Controlled Laser Cleaning of Artworks via low Resolution Plasma Spectroscopy and Linear Correlation, 978-90-365-2559-6, December, 7, 2007. Impact, IPV. See also: http://doc.utwente.nl/58098/.
wa1131 M.W. de Graaf, Sensor-guided Robotic Laser Welding, 978-90-365-2564-0, December, 6, 2007. Impact, IPV, EM. See also: http://doc.utwente.nl/58092/.
wa1132 J. Könemann, Analysis and control of a flexible 6DOF parallel manipulator, Report no. wa1132, December, 21, 2007.
wa1133 R.G.K.M. Aarts, M. Scholts, T. Hardeman, J. van Dijk, Laserlasinrichting en werkwijze voor het lassen van een voorwerp, Universiteit Twente, 2001017, December, 2007. NIMR, Impact, EM, DISC.
wa1134 J. Olde Benneker, A. Gales, Laser-MIG/MAG hybride lassen (TI.07.36), No isbn, Vereniging FME-CWM, October, 2007. NIMR.
wa1135 J. Olde Benneker, Snelle precisie bewegingen bij robot-laserlassen, Metaal & Techniek (ISSN 0026-0479) 52 (3) pp. 22-23 (2007). NIMR.
wa1136 G.W. van der Poel, J. van Dijk, J.B. Jonker and H.M.J.R. Soemers, The effect of various disturbance sources on vibration isolation performance, pp. 34 in Book of Abstracts 27th Benelux Meeting on Systems and Control, Ed. G. Meinsma, H. Stigter (ISBN 978-90-8504-963-0) Heeze, Netherlands, March, 18-20, 2008. Impact, EM, DISC.
wa1137 V. Hollander, Design of a hybrid hard mount setup for application of vibration isolation, Report no. wa1137, September, 2008.
wa1138 R.G.K.M. Aarts, J.P. Meijaard and J.B. Jonker, SPACAR-manual 2008, Report no. wa1138, March, 2008. Impact, EM, DISC.
wa1139 J.B. Jonker, R.G.K.M. Aarts, J. van Dijk, Prototype modelling of mechanic systems - An introduction for Project F, Report no. wa1139, 2008. Impact, EM, DISC.
wa1140 T. Wonnink, Design and analysis of a flexible 6DOFs parallel manipulator, Report no. wa1140, March, 27, 2008. Impact, EM.
wa1141 D. Tjepkema, Identification of the Stäubli RX90B robot using accelerometers, Report no. wa1141, March, 28, 2008. M2i, Impact, EM, DISC.
wa1142 B.-J. Roeterdink, Design of a micro assembly tool with micrometer accuracy, University of Twente, Report no. wa1142, May, 08, 2008. Impact, EM, DISC.
wa1143 R. Bulsink, System identification and feedback control of a MIMO vibration isolation setup, University of Twente, Report no. wa1143, June, 20, 2008. Impact, EM, DISC.
wa1144 N. Karlitskaya, J. Meijer, Laser Die Transfer, CIRP, Scientific Technical Committee "E", Paris, France, January, 25, 2008. Impact, IPV.
wa1145 N. Karlitskaya, W. Wesseling, H. Kettelarij, Laser die transfer, SenterNovem (No ISSN) (2008). Impact, IPV.
wa1146 G.W. van der Poel, J. van Dijk, H.M.J.R. Soemers, J.B. Jonker, Selection of motion sensors for hard mount active vibration isolation, No pages in Proceedings 9th International Conference on Motion and Vibration Control (MOVIC) (No ISBN or ISSN) München, Germany, September, 15-18, 2008. Impact, EM, DISC, cd-rom.
wa1147 J. van Dijk, J.B. Jonker, Mechatronic design of hard-mount concepts for precision equipment, No pages in Proceedings 9th International Conference on Motion and Vibration Control (MOVIC) (No ISBN or ISSN) München, Germany, September, 15-18, 2008. Impact, EM, DISC, cd-rom.
wa1148 J.P. Meijaard, D.M. Brouwer, J.B. Jonker, Analytical and experimental analysis of a parallel leaf spring guidance, pp. 287 in Abstracts book (ISBN 978-0-9805142-0-9) Adelaide, Australia, University of Adelaide, August, 25-29, 2008. Impact, EM, DISC, cd-rom, extendet abstracts, ISBN: 978-0-9805142-1-6.
wa1149 V. Hollander, J.B. Jonker, J. van Dijk, Design of mechatronic systems using a flexible multibody system approach, pp. 375-382 in Proceedings of the 4th European Conference on Structural Control, Ed. A.K. Belyaev, D.A. Indeitsev (ISBN 978-5-904045-10-4) St. Petersburg, Russia, Institute of Problems in Mechanical Engineering RAS, September, 8-12, 2008. Impact, EM, DISC.
wa1150 Alexander Pil, Toon Hardeman, Twentse onderzoeker modelleert wiebelende robotgewrichten, Mechatronica Magazine (No ISSN) 2 (2) pp. 13 (2008). M2i, Impact, EM, DISC. See also: http://www.mechatronicamagazine.nl/nieuws/algemeen-nieuws/bekijk/artikel/twentse-onderzoeker-modelleert-wiebelende-robotgewrichten.html.
wa1151 T. Hardeman, Modelling and Identification of Industrial Robots including Drive and Joint Flexibilities, 978-90-365-2621-0, University of Twente, February, 1, 2008. M2i, Impact, EM.
wa1152 J. Van Vaerenbergh, Process Optimisation in Selective Laser Melting, 978-90-365-2673-9, University of Twente, July, 10, 2008. Impact, IPV.
wa1153 H.M.J.R. Soemers, K. Krastev, D. van Lierop, Design of a high frequency MEMS scanning mirror, No pages in Proceedings of the Annual Meeting of the American Society of Precision Engineering (ASPE) (No ISBN or ISSN) Portland, Oregon, USA, October, 19-24, 2008. Impact, EM, DISC, cd-rom.
wa1154 Jan Bennik, Mechatronic design of a humanoid head and neck, Report no. wa1154, September 4, 2008. Impact, DISC.
wa1155 V. Kovalenko, J. Meijer, M. Anyakin, R. Zhuk, P. Kondrashev, O. Stepura, Some results of studying laser micromachining at medical stents manufacturing, No pages in Proceeding of the 6th International Symposium on Nanomanufacturing (ISNM-06) (No ISBN or ISSN) Athens, Greece, November, 12-14, 2008. Impact, IPV.
wa1156 J. Haneveld, D.M. Brouwer, A. Mehendale, R. Zwikker, T.S.J. Lammerink, M.J. de Boer, R.J. Wiegerink, MEMS-based Micro Coriolis mass flow sensor, pp. 560-564 in Proceedings of the 10th EUSPEN international conference, Ed. EUSPEN (ISBN 13:978-0-9553082-5-3) Zurich, Swice, Copy&Druck, A-1160 Wein, May, 18-22, 2008. EM, DISC.
wa1157 M.J. Geerken, M.N.W. Groenendijk, R.G.H. Lammertink, M. Wessling, Micro-fabricated metal nozzle plates used for water-in-oil and oil-in-water emulsification, Journal of Membrane Science (ISSN 0376-7388) 310 (1-2) pp. 374-383 (2008). Impact, IPV.
wa1158 J. Van Vaerenbergh, Belgium - Basic research activities in Belgium, No pages in Wohlers Report 2008 - State of the Industry Annual Worldwide Progress Report, Ed. Terry Wohlers, 0-9754429-4-5, Wohlers Associates Inc., 2008. Impact, IPV.
wa1159 R.G.K.M. Aarts, J. van Dijk, Dictaat Systeemanalyse & Systeem- en Regeltechniek I, Report no. wa1159, October, 15, 2008. Impact, EM, DISC.
wa1160 R. Pieper, Inertial measurment of antenna attitude, University of Twente, Report no. wa1160, November, 06, 2008. Impact, EM.
wa1161 S. Rowell, A.A. Popov, J.P. Meijaard, Parameter study of motorcycle riding by model predictive control, pp. 770-775 in Proceedings of the 9th International Symposium on Advanced Vehicle Control, Ed. M. Abe et al. (ISBN 978-4-904056-22-6) Tokyo, Japan, Society of Automotive Engineers of Japan, October, 6-9, 2008. Impact, EM, DISC.
wa1162 J.B. Jonker, R.G.K.M. Aarts, J. van Dijk, A linearized input-output representation of flexible multibody systems for control synthesis, Multibody System Dynamics (ISSN 1384-5640) 21 (2) pp. 99-122 (2009). Impact, EM, DISC. DOI: 10.1007/s11044-008-9130-6.
wa1163 A.J. Huis in 't Veld, M.N.W. Groenendijk, H. Fischer, On the origin, growth and application of ripples, pp. 150-154 in Proceedings of the 9th International Symposium on Laser Precision Microfabrication (No ISBN or ISSN) Quebec, Canada, JLPS-Japan Laser Processing Society, June, 16-20, 2008. Impact, IPV, EM, Proceedings published online..
wa1164 A.L. Schwab, J.P. Meijaard, De stabiele fiets, Nederlands Tijdschrift voor Natuurkunde (ISSN 0926-4264) 74 (1) pp. 24-28 (2008). Impact, EM, DISC.
wa1165 J.D.G. Kooijman, A.L. Schwab, J.P. Meijaard, Experimental validation of a model of an uncontrolled bicycle, Multibody System Dynamics (ISSN 1384-5640) 19 (1-2) pp. 115-132 (2008). Impact, EM, DISC.
wa1166 S. Rowell, A.A. Popov, J.P. Meijaard, Application of predictive control strategies to the motorcycle riding task, pp. 805-814 in Proceedings of the 20th IAVSD Symposium, Tracks Vehicle System Dynamics Supplement 46 (2008), Ed. J.K. Hedrick (No ISBN or ISSN) Berkeley, CA, USA, August, 13-17, 2007. Impact, EM, DISC.
wa1167 A.L. Schwab, J.D.G. Kooijman, J.P. Meijaard, Some recent developments in bicycle dynamics and control, pp. 695-702 in Proceedings of the Fourth European Conference on Structural Control, Ed. A.K. Belyaev, D.A. Indeitsev (ISBN 978-5-904045-10-4) Saint-Petersburg, Russia, Russian Academy of Sciences, September, 8-12, 2008. Impact, EM, DISC.
wa1168 A.J. Huis in 't Veld, Toekomstige trends in de toegepaste lasertechniek, Roestvast Staal (ISSN 0169-3328) 24 (4) pp. 28-29 (2008). M2i, Impact, EM.
wa1170 A. Baczmanski, P. Lipinski, A. Tidu, K. Wierzbanowski, B. Pathiraj, Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel, Journal of Applied Crystallography (ISSN 0021-8898) pp. 854-867 (2008). M2i, Impact, IPV.
wa1171 J.P. Meijaard, A.A. Popov, Practical stability analysis for transient system dynamics, Journal of Mechanical Engineering Science (ISSN 0954-4062) 222 pp. 2123-2135 (2008). Impact, EM, DISC.
wa1172 S. E. Boer, Study of a thermal deformation state estimator for use in optical lithography, University of Twente, Report no. wa1172, January, 9, 2009.
wa1174 J. van Dijk, Mechatronic design of hard-mount concepts for precision equipment, pp. 315-324 in Motion and Vibration Control, Ed. H. Ulbrich, L. Ginzinger, 978-1-4020-9437-8, Springer München, 2009. Impact, EM, DISC.
wa1175 J. Olde Benneker, Nieuwe lasers zetten vooral in op lassen, LaserNieuws (ISSN 1875-1628) 2 (1) pp. 10-11 (2008). M2i.
wa1176 J. Olde Benneker, Laserlassen loont als wordt voldaan aan randvoorwaarden, LaserNieuws (ISSN 1875-1628) 2 (1) pp. 47-49 (2008). M2i.
wa1177 Rudolf Saathof, Adaptive Vibration Isolation Control using Infinite Impulse Response Filters, University of Twente, Report no. wa1177, February, 20, 2009. DISC.
wa1178 B. Nahuis, Thermo mechanical behavior of ironcare linear motors, Report no. wa1178, March, 12, 2009.
wa1179 J.B. Jonker, R.G.K.M. Aarts, J. van Dijk, Prototype modelling of mechanic systems - An introduction for Project F, Report no. wa1179, 2009. Impact, EM, DISC.
wa1180 R.G.K.M. Aarts, J.P. Meijaard and J.B. Jonker, SPACAR-manual 2009, Report no. wa1180, March, 2009. Impact, EM, DISC.
wa1181 M. Trumpi, Proof-of-principle design of an automated optical fiber to waveguide coupler, University of Twente, Report no. wa1181, March, 5, 2009.
wa1182 M. Huijts, Design, modelling and control of a parallel kinematic manipulator validated with experiments, Report no. wa1182, April, 8, 2009.
wa1183 G.W. van der Poel, Active vibration isolation using stiff supports, pp. 57-60 in Proceedings of Philips Conference on Aplications of Control Technology (PACT) 2009 (No ISBN or ISSN) Hilvarenbroek, February, 3-4, 2009. Impact, EM.
wa1184 G.W. van der Poel, J. van Dijk, J.B. Jonker, H.M.J.R. Soemers, Improving the vibration isolation performance of hard mounts for precision equipment, pp. cd-rom in IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (ISBN 1-4244-1264-1) Zurich, Swice, September, 4-7, 2007. Impact, EM, DISC.
wa1185 H.M.J.R. Soemers, D. van Lierop, R. Sanders, T. Kuijpers, B. de Jong, A MEMS mirror for miniature laser projection, pp. 337-340 in Proceedings of the Euspen International Conference (ISBN 0-9553082-6-0) San Sebastian, Spain, June, 2-5, 2009. Impact, DISC.
wa1186 R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Efficient analyses for the mechatronic design of mechanisms with flexible joints undergoing large deformations, pp. 1-7 in Proceedings of the ECCOMAS Thematic Conference, Multibody Dynamics 2009, Ed. K. Arczewski, J. Fraczek, M. Wojityra (ISBN 978-83-7207-813-1) Warsaw, Poland, Warsaw University of Technology, June, 29-July, 2, 2009. Impact, EM, DISC.
wa1187 J.B. Jonker, J.P. Meijaard, Definition of deformation parameters for beam elements and their use in flexible multibody system analysis, pp. 1-20 in Proceedings of the ECCOMAS Thematic Conference, Multibody Dynamics 2009, Ed. K. Arczewski, J. Fraczek, M. Wojityra (ISBN 978-83-7207-813-1) Warsaw, Poland, Warsaw University of Technology, June, 29-July, 2, 2009. Impact, EM, DISC.
wa1188 G.R.B.E. Römer, Safety protocol - Laser micro laboratory, Report no. wa1188, April, 10, 2009. Impact, EM.
wa1189 G.R.B.E. Römer, Risk analyses, Trumpf workstation, Report no. wa1189, April, 10, 2009. Impact, EM.
wa1190 G.R.B.E. Römer, Risk analyses, Coherent workstation, Report no. wa1190, April, 10, 2009. Impact, EM.
wa1191 G.R.B.E. Römer, Risk analyses, Laser micro laboratory, Report no. wa1191, April, 10, 2009. Impact, EM.
wa1192 W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tracking for systems with configuration dependent dynamics by the application of robust iterative learning control, pp. 289-292 in Proceedings of the 9th Euspen International Conference 2009 (ISBN 0-9553082-6-0) San Sebastian, Spain, June, 2-5, 2009. M2i, Impact, DISC.
wa1193 G.R.B.E. Römer, A.J. Huis in 't Veld, J. Meijer, M.N.W. Groenendijk, On the formation of laser induced self-organizing nanostructures, CIRP Annals - Manufacturing Technology (ISSN 0007-8506) 58 pp. 201-204 (2009). Impact, EM.
wa1194 D. Iakovou, Sensor development and integration for robotized laser welding, 978-90-365-2770-5, University of Twente, February, 5, 2009. Impact, IPV, EM.
wa1195 J.T. Hofman, Development of an observation and control system for industrial laser cladding, 978-90-77172-42-1, University of Twente, February, 13, 2009. M2i, Impact, EM.
wa1196 P. Toljaga, Design of an advanced robot hand for a humanoid assistant robot, Report no. wa1196, June, 18, 2009.
wa1197 Alexander Otten, Design of an elastic mechanism for a MEMS based electrostatic actuator, Report no. wa1197, June, 25, 2009.
wa1198 Maarten Menno Arnolli, Model developments for the nonlinear dynamic analysis of a flexible parallel guidance, Report no. wa1198, July, 10, 2009.
wa1199 A.L. Schwab, J.P. Meijaard, Beam benchmark problems for validation of flexible multibody dynamics codes, pp. 1-13 in Proceedings of the ECCOMAS Thematic Conference, Multibody Dynamics 2009, Ed. K. Arczewski, J. Fraczek, M. Wojityra (ISBN 978-83-7207-813-1) Warsaw, Poland, Warsaw University of Technology, June, 29-July, 2, 2009. Impact, EM, DISC.
wa1200 D.M. Brouwer, J. Bennik, J. Leideman, H.M.J.R. Soemers, S. Stramigioli, Mechatronic design of a fast and long range 4 degrees of freedom humanoid neck, pp. 574 - 579 in Proceedings of the IEEE International Conference on Robotics and Automation 2009 (ISBN 978-1-4244-2788-8, ISSN 1050-4729) Kobe, Japan, May, 12-17, 2009. Impact, EM, DISC.
wa1201 M.B.P. Huijts, D.M. Brouwer, J. van Dijk, Design and control of a parallel kinematic 6-DOFs precision manipulator, pp. 357-360 in Proceedings of the 9th Euspen International Conference 2009 (ISBN 0-9553082-6-0) San Sebastian, Spain, June, 2-5, 2009. Impact, EM, DISC.
wa1202 L. Kristiansen, A. Mehendale, D.M. Brouwer, J.M. Zwikker, M.E. Klein, Optical measurement of a micro coriolis mass flow sensor, pp. 328-332 in Proceedings of the 9th Euspen International Conference 2009, Vol. I (ISBN 0-9553082-6-0) San Sebastian, Spain, June, 2-5, 2009. Impact, EM, DISC.
wa1203 J.B. Bakker, Investigation into oscillating cutting methods for passenger tire components, Report no. wa1203, August, 8, 2009.
wa1204 D.M. Brouwer, J.P. Meijaard, J.B. Jonker, Elastic element showing low stiffness loss at large deflection, pp. 1-4 in Proceedings of the 24th ASPE Annual Meeting (No ISBN or ISSN) Monterey, California, USA, October, 4-9, 2009. Impact, EM, DISC.
wa1205 W.B.J. Hakvoort, Iterative learning control for LTV systems with applications to an industrial robot, 978-90-77172-44-5, University of Twente, May, 28, 2009. M2i, Impact, DISC.
wa1206 D. Hordijk, Modelling and control of an active visor on a trailing suction Hopper Dredger, Report no. wa1206, September, 9, 2009.
wa1207 A.J. Huis in 't Veld, M.N.W. Groenendijk, H. Fischer, On the origin, growth and application of ripples, Journal of Laser Micro/Nanoengineering (ISSN 1880-0688) 3 (3) pp. 206-210 (2008). M2i, Impact, IPV. DOI: 10.2961/jlmn.2008.03.0014.
wa1208 J. Jansen, Research on the application of adhesive joining of micro parts, Report no. wa1208, September, 17, 2009.
wa1209 B.J. Aalderink, B. Pathiraj, R.G.K.M. Aarts, Seam gap bridging of laser based processes for the welding of aluminium sheets for industrial applications, International Journal of Advanced Manufacturing Technology (ISSN 0268-3768) 48 (1-4) pp. 143-154 (2010). M2i, Impact, EM. DOI: 10.1007/s00170-009-2270-x.
wa1210 W.B.J. Hakvoort, R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, A computationally efficient algorithm of iterative learning control for discrete-time linear time-varying systems, Automatica (ISSN 0005-1098) 45 (12) pp. 2925-2929 (2009). M2i, Impact, DISC. DOI: 10.1016/j.automatica.2009.09.023.
wa1211 A.R. Konuk, R.G.K.M. Aarts, A.J. Huis in 't Veld, Spectra analysis of the process emission during laser welding of AISI 304 stainless steel with disk and Nd:YAG laser, pp. 666-675 in Proceeding of the ICALEO 2009 (ISBN 978-0-912035-59-8) Orlando, FL, USA, November, 2-5, 2009. Impact, EM.
wa1212 G.R.B.E. Römer, D. Arnaldo del Cerro, R.C.J. Sipkema, M.N.W. Groenendijk, A.J. Huis in 't Veld, Ultra short pulse laser generated surface textures for anti-ice applications in aviation, pp. 30-37 in Proceedings of the ICALEO 2009 (ISBN 978-0-912035-59-8) Orlando, FL, USA, November, 2-5, 2009. Impact, EM.
wa1213 D.M. Brouwer, B.R. de Jong, M.J. de Boer, H.V. Jansen, J. van Dijk, G.J.M. Krijnen and H.M.J.R. Soemers, MEMS-based clamp with a passive hold function for precision postition retaining of micro manipulators, Journal of Micromechanics and Microengineering (ISSN 1361-6439) 19 (6) pp. 065027 (20pp) (2009). Impact, Mesa+, EM, DISC. DOI: 10.1088/0960-1317/19/6/065027.
wa1214 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, Design and modeling of a six DOF's MEMS-based precision manipulator, Precision Engineering (ISSN 0141-6359) 34 (2) pp. 307-319 (2010). Impact, EM, DISC. DOI: 10.1016/j.precisioneng.2009.08.001.
wa1215 J.P. Meijaard, D.M. Brouwer, J.B. Jonker, Analytical and experimental investigation of a parallel leaf spring guidance, Multibody System Dynamics (ISSN 1384-5640) 23 (1) pp. 77-97 (2010). Impact, EM, DISC. DOI: 10.1007/s11044-009-9172-4.
wa1216 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, G.J.M. Krijnen, Numerical evaluation of piezo, thermo, electro-magnetic and electro-static MEMS actuators based on designs, pp. Vol. I, 172-175 in Proceeding of the EUSPEN 2006 (No ISBN or ISSN) Baden-Wien, Austria, May, 2006. Impact, Mesa+, EM, DISC.
wa1217 R. Reilink, L.C. Visser, J. Bennik, R. Carloni, D.M. Brouwer, S. Stamigioli, The Twente humanoid head, pp. 1593-1594 in 2009 IEEE Proceedings of the International Conference on Robotics and Automation (ISBN 978-1-4244-2788-8, ISSN 1050-4729) Kobe, Japan, May, 12-17, 2009. Impact, DISC.
wa1218 G.W. van der Poel, Onwikkeling van SmartMounts - Eindrapportage werkpakket 1, Report no. wa1218, October, 2009, 2009. Impact, EM.
wa1219 R.G.K.M. Aarts, J. van Dijk, G.R.B.E. Römer, Dictaat Systeemanalyse, Report no. wa1219, October, 2009.
wa1220 D.M. Brouwer, B.R. de Jong, H.M.J.R. Soemers, MEMS-based 6 DOF parallel kinematic precision micro manipulator, pp. Vol. I, 111-114 in Proceedings of the EUSPEN 2006 (No ISBN or ISSN) Baden-Wien, Austria, May, 2006. Impact, EM, DISC.
wa1222 M.B.P. Huijts, D.M. Brouwer, J. van Dijk, Design, modeling and control of an elastic parallel kinematic 6-DOFs manipulator, Mikroniek (ISSN 0026-3699) 49 (5) pp. 42-47 (2009). Impact, EM, DISC.
wa1223 C. De Persis, Robust stabilization of nonlinear systems by quantized and ternary control, Systems & Control Letters (ISSN 0167-6911) 58 (8) pp. 602-609 (2009). Impact, DISC.
wa1224 C. De Persis, Minimal data-rate stabilization of nonlinear systems over networks with large delays., International Journal of Robust and Nonlinear Control (ISSN 1049-8923) 20 (10) pp. 1097-1111 (2010). Impact, DISC. DOI: 10.1002/rnc.149.
wa1225 C. De Persis, F. Mazenc, Stability of quantized time-delay nonlinear systems: A Lyapunov-Krasowskii-functional approach, pp. 4093-4098 in Proceedings of Joint 48th IEEE Conference on Decision and Control and 28th Chinese Control Conference (ISBN 978-1-4244-3872-3) Shanghai, China, December, 16-18, 2009. Impact, DISC.
wa1226 C. De Persis, Robustness of quantized continuous-time nonlinear systems to encoder/decoder mismatch., pp. 13-18 in Proceedings of Joint 48th IEEE Conference on Decision and Control and 28th Chinese Control Conference (ISBN 978-1-4244-3872-3) Shanghai, China, December, 16-18, 2009. Impact, DISC.
wa1227 C. De Persis, C.S. Kallesoe, Pressure regulation in nonlinear hydraulic networks by positive controls, pp. 4102-4107 in Proceedings of the European Control Conference '09 (ISBN 978-963-311-369-1) Budapest, Hungary, August, 23-26, 2009. Impact, DISC.
wa1228 C. De Persis, C.S. Kallesoe, Qunatized controllers distributed over a network: An industrial case study, pp. 616-621 in Proceedings of the Meditarranean Control Conference '09 (ISBN 978-1-4244-4685-8) Thessaloniki, Greece, June, 24-26, 2009. Impact, DISC.
wa1229 A.J. Huis in 't Veld, H. van der Veer, Initiation of femtosecond laser machined ripples in steel observed by scanning helium ion microscopy (SHIM), No pages in Proceedings of LAMP2009 - the 5th International Congress on Laser Advanced Materials Proceeding (No ISBN or ISSN) Kobe, Japan, June, 29-July, 2, 2009. Impact, EM.
wa1229a A.J. Huis in 't Veld, H. van der Veer, Initiation of femtosecond laser machined ripples in steel observed by scanning helium ion microscopy (SHIM), Journal of Laser Micro/Nanoengineering (No ISSN) 5 (1) pp. 28-34 (2010). EM.
wa1230 J.P. Meijaard, W.B.J. Hakvoort, Modelling of fluid-conveying flexible pipes in multibody systems, No pages in Proceedings of the 7th EUROMECH Solid Mechancis Conference, Ed. J.A.C. Ambrosio & M.P.T. Silva (ISBN 978-989-96264-2-3) Lisboa, Portugal, Portuguese Association for Theoretical, Applied and Computational Mechanics, September, 7-10, 2009. Impact, EM, DISC.
wa1231 R.G.K.M. Aarts, J. van Dijk, J.B. Jonker, Flexible multibody analyses for the design of controlled compliant mechanisms undergoing large deformations, pp. 1-4 in 1st ESA Workshop on Multibody Dynamics for Space Applications (No ISBN or ISSN) ESA Noorwijk, Netherlands, February, 2 and 3, 2010. Impact, EM, DISC.
wa1233 A.J. Huis in 't Veld, De impact van licht, University of Twente, January, 22, 2009. Impact.
wa1234 V.S. Mitko, Memo: Time resolved measurements (M61.3.08300), Report no. wa1234, April, 15, 2010. M2i.
wa1236 T.P.H. Warmerdam, H.M.J.R. Soemers, Increasing precision and performance by relaxing the classical design rules: bio inspired design, pp. 305-308 in Proceedings of the 9th Euspen International Conference 2009 (ISBN 0-9553082-6-0) San Sebastian, Spain, May, 2009. Impact, DISC.
wa1237 S. Rowell, A.A. Popov, J.P. Meijaard, Optimal control to modelling motorcycle rider steering: local versus global coordinate systems in rider preview, Vehicle System Dynamics (ISSN 0042-3114) 48 (4) pp. 429-456 (2010). Impact, EM, DISC.
wa1238 J. Beens, Upgrade and analysis of a hair cutting force measurement set-up, Report no. wa1238, March, 18, 2010.
wa1239 R.G.K.M. Aarts, J.B. Jonker, J. van Dijk, Prototype modelling of mechanic systems - An introduction for Project F, Report no. wa1239, 2010. Impact, EM, DISC.
wa1240 R.G.K.M. Aarts, J. van Dijk, Dictaat Systeem- en Regeltechniek I, Report no. wa1240, April, 2010.
wa1241 V.S. Mitko, Literature review: formation and evolution of micro-bumps and jets arrays on a dold layer using ultra short laser pulses, Report no. wa1241, March, 2010. M2i.
wa1242 Ronald G.K.M. Aarts, Johannes van Dijk, Ben J.B. Jonker, Flexible multibody modelling for the mechatronic design of compliant mechanisms, pp. 1-10 in The 1st Joint International Conference on Multibody System Dynamics, Ed. Aki Mikkola and Werner Schiehlen (ISBN 978-952-214-778-3) Lappeenranta, Finland, Lappeenranta University of Technology, May 25-27, 2010. Impact, EM, DISC.
wa1243 Steven E. Boer, Ronald G.K.M. Aarts, Dannis M. Brouwer, J. Ben Jonker, Multibody Modelling and Optimization of a Curved Hinge Flexure, pp. 1-10 in The 1st Joint International Conference on Multibody System Dynamics, Ed. Aki Mikkola and Werner Schiehlen (ISBN 978-952-214-778-3) Lappeenranta, Finland, Lappeenranta University of Technology, May 25-27, 2010. Impact, EM.
wa1244 W.B.J. Hakvoort, J.P. Meijaard, R.G.K.M. Aarts, J.B. Jonker, J.M. Zwikker, Modeling a Coriolis Mass Flow Meter for Shape Optimization, pp. 1-10 in The 1st Joint International Conference on Multibody System Dynamics, Ed. Aki Mikkola and Werner Schiehlen (ISBN 978-952-214-778-3) Lappeenranta, Finland, Lappeenranta University of Technology, May 25-27, 2010. Impact, EM.
wa1245 J.P. Meijaard, Modelling of beams made of anisotropic materials, pp. 1-10 in The 1st Joint International Conference on Multibody System Dynamics, Ed. Aki Mikkola and Werner Schiehlen (ISBN 978-952-214-778-3) Lappeenranta, Finland, Lappeenranta University of Technology, May 25-27, 2010. Impact, EM.
wa1246 Menno de Graaf, Ronald Aarts, Ben Jonker, Johan Meijer, Real-time seam tracking for robotic laser welding using trajectory-based control, Control Engineering Practice (ISSN 0967-0661) 18 (8) pp. 944-953 (2010). Impact, IPV, EM. DOI: 10.1016/j.conengprac.2010.04.001.
wa1247 G.R.B.E. Römer, A.J. Huis in 't Veld, Matlab laser toolbox, Physics Procedia 00 (No ISSN) pp. 1-10 (2010).
wa1248 B.R. de Jong, D.M. Brouwer, M.J. de Boer, H.V. Jansen, H.M.J.R. Soemers, Design and fabrication of a planar three DOFs MEMS-based manipulator, Journal of Microelectromechanical Systems (ISSN 1057-7157) 19 (5) pp. 1116 - 1130 (2010). Impact, DISC. DOI: 10.1109/JMEMS.2010.2067196.
wa1249 J. Eichstädt, Ultra short pulse laser micro machining of technical glasses, Report no. wa1249, May, 2010. Impact, EM.
wa1250 G.W van der Poel, An exploration of active hard mount vibration isolation for precision equipment, 978-90-365-3016-3, University of Twente, May, 21, 2010. Impact, EM. DOI: 10.3990/1.9789036530163.
wa1251 R. Alink, Modelling and design of an underactuated robotic finger, Report no. wa1251, June, 17, 2010. Impact, EM, DISC.
wa1252 G.H.P. Ebberink, Trigger box for the Trumpf TruMicro laser source, Report no. wa1252, June, 18, 2010. Impact, EM.
wa1253 G.W. van der Poel, Smart mounts, Mikroniek (ISSN 0026-3699) (2010). Impact, EM.
wa1254 A.L. Schwab, J.P. Meijaard, Comparison of three-dimensional flexible beam elements for dynamic analysis: classical finite element formulation and absolute nodal coordinate formulation, ASME Journal of Computational and Nonlinear Dynamics (No ISSN) 5 (1) pp. 011010-1-011010-10 (2010). Impact, EM, DISC.
wa1255 J.P. Meijaard, Modelling and simulation of longitudinal tyre behaviour, pp. 161-170 in Non-smooth problems in vehicle systems dynamics - Proceedings of the Euromech 500 colloquium, Ed. P.G. Thomsen and H. True (ISBN 978-3-642-01355-3) No address, Springer Verlag Berlin, 2010. Impact, EM. DOI: 10.1007/978-3-642-01356-0_14.
wa1256 C. De Persis, F. Mazenc, Stability of quantized time-delay systems: A Lyapunov-Krasowskii- functional approach, Mathematics of Control Signals and Systems (ISSN 0932-4194) 21 (4) pp. 337-370 (2010). Impact, DISC. DOI: 10.1007/s00498-010-0048-1.
wa1257 F. Ceragioli, C. De Persis, P. Frasca, Discontinuities and hysteresis in quantized average consensus, No pages in Proceedings of the 8th IFAC Symposium on Nonlinear Control Systems (NOLCOS) (No ISBN or ISSN) Bologna, Italy, September, 1-3, 2010. Impact, DISC.
wa1258 D.M. Brouwer, J.P. Meijaard and J.B. Jonker, Stiffness analysis of parallel leaf-spring flexures, pp. Accepted in Proceedings of the 25th annual meeting of the American Society of Precision Engineering (No ISBN or ISSN) Atlanta, GA, USA, Ocotber 31-November 5, 2010. Impact, EM, DISC.
wa1259 D.M. Brouwer, A. Otten, J.B.C. Engelen, B. Krijnen, H.M.J.R. Soemers, Long-range elastic guidance mechanisms for electrostatic comb-drive actuators, pp. 47-50 in Proceedings of the 10th EUSPEN international conference (ISBN 13:978-0-9553082-8-4) Delft, the Netherlands, May, 31-June, 4, 2010. Impact, Mesa+, DISC.
wa1260 R.P. Hogervorst, B. Krijnen, D.M. Brouwer, J.B.C. Engelen, U. Staufer, A single-mask thermal displacement sensor in MEMS, pp. 462-465 in Proceedings of the 10th EUSPEN international conference (ISBN 13:978-0-9553082-8-4) Delft, the Netherlands, May, 31-June, 4, 2010. Impact, Mesa+, DISC.
wa1261 A.A. Popov, S. Rowell, J.P. Meijaard, A review on motorcycle and rider modelling for steering control, Vehicle System Dynamics (ISSN 0042-3114) 48 (6) pp. 775-792 (2010). Impact, EM. DOI: 10.1080/00423110903033393.
wa1262 J. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, V.S. Mitko, J.V. Obona, V. Ocelik, J.T.M. De Hosson, Modeling of laser induced periodic surface structures, pp. 1-6 in Proceedings of the 11th International Symposium on Laser Precision Microfabrication (No ISBN or ISSN) Stuttgart, Germany, June, 8-10, 2010. M2i, Impact.
wa1263 R. Jagdheesh, B. Pathiraj, A.G. Martin, D. Arnaldo del Cerro, R.G.H. Lammertink, D. Lohse, A.J. Huis in 't Veld, G.R.B.E. Römer, Ultra fast laser machined hydrophobic stainless steel surface for drag reduction in laminar flows, pp. 1-6 in Proceedings of the 11th International Symposium on Laser Precision Microfabrication (No ISBN or ISSN) Stuttgart, Germany, June, 8-10, 2010. M2i, Impact.
wa1264 D. Arnaldo del Cerro, G.R.B.E. Römer, A.J. Huis in 't Veld, Picosecond laser machined designed patterns with anti-ice effect, pp. 1-4 in Proceedings of the 11th International Symposium on Laser Precision Microfabrication (No ISBN or ISSN) Stuttgart, Germany, June, 8-10, 2010. Impact, EM.
wa1265 D. Arnaldo del Cerro, G.R.B.E. Römer, A.J. Huis in 't Veld, Erosion resistant anti-ice surface generated by ultra short laser pulses, pp. 231-235 in Proceedings of the 6th International Conference and Exhibition on Laser Assisted Net Shape Engineering, LANE 2010, Ed. Elsevier (ISBN 1875-3892) Erlangen, Germany, September, 21-24, 2010. Impact, EM, part 1.
wa1266 V.S. Mitko, Memo: Roughness measurmements on Au, Cr, Cu and Si samples (M61.3.08300), Report no. wa1266, June, 24, 2010. M2i.
wa1267 B. Krijnen, R.P. Hogervorst, J.B.C. Engelen, J.W. van Dijk, D.M. Brouwer, L. Abelmann, Single-mask thermal displacement sensor in MEMS, pp. 1-4 in 21st Micromechanics and Microengineering Europe Workshop (No ISBN or ISSN) Enschede, the Netherlands, September, 26-29, 2010. Impact, Mesa+, DISC.
wa1268 M. Workum, Laser generated 3D-textures for thin film solar cells, Report no. wa1268, Augustus, 4, 2010.
wa1269 Ronald Aarts, Column - Een oplossing die gelukkig nog steeds op zoek is naar problemen, Nederlands Tijdschrift voor Natuurkunde (ISSN 0926-4264) 76 (6) pp. 222-223 (2010). M2i, Impact.
wa1270 V. van der Wijk, J.L. Herder, On the development of low mass shaking force balanced manipulators, pp. 411-420 in Proceedings of the IFToMM 12th International Symposium on Advances in Robot Kinematics (ISBN 978-90-481-9261-8) Piran-Portoroz, Slovenia, Springer 2010, June, 27-July, 1, 2010. Impact, EM.
wa1271 V. Kovalenko, M. Anyakin, R. Zhuk, P. Kondrashev, O. Stepura, J. Meijer, Some results of studying laser micromachining at medical stents manufacturing, International Journal of Nanofacturing (ISSN 1746-9392) 6 (1/2/3/4) pp. 253-263 (2010). Impact, IPV, EM.
wa1272 F. Hoitzing, Kinematic and dynamic modeling for the conceptual design of a 2-DOFs large stroke elastic positioning mechanism, Report no. wa1272, September, 16, 2010. Impact, EM.
wa1273 J.W. van Dijk, Modeling and validation of a MEMS-based thermal position sensor, Report no. wa1273, September, 23, 2010. Impact.
wa1274 R. Reilink, L.C. Visser, D.M. Brouwer, R. Carloni, S. Stramigioli, Mechatronic design of the twente humanoid head, Journal of Intelligent Service Robotics (ISSN 1861-2784) (2010). Impact, EM, DISC, just online published. DOI: 10.1007/s11370-010-0077-0.
wa1275 V. van der Wijk, J.L. Herder, Dynamic balancing of a single crank-double slider mechanism with symmetrically moving couplers, pp. 413-420 in Proceedings of the IFToMM 3rd European Conference on Mechanism Science (ISBN 978-90-481-9688-3) Cluj-Napoca, Romania, Springer 2010, September, 14-17, 2010. Impact, EM.
wa1276 V. van der Wijk, J.L. Herder, Active dynamic balancing unit for controlled shaking force and shaking moment balancing, pp. DETC2010-28423 in Proceedings of the ASME 2010, IDETC/CIE 2010 (No ISBN or ISSN) Quebec, Canada, ASME-AMER SOC MECHANICAL ENG, August, 15-18, 2010. Impact, EM, cd-rom.
wa1277 G.R.B.E. Römer, A.J. Huis in 't Veld,, Matlab laser toolbox, pp. 523-529 in Proceedings of the ICALEO 2010, Ed. LIA (ISBN 978-0-912035-61-1) Anaheim (CA), USA, September, 26-30, 2010. Impact, EM.
wa1278 D. Arnaldo del Cerro, G.R.B.E. Römer, A.J. Huis in 't Veld, Ultra short laser pulse generation of anti-ice surfaces, pp. 1356-1360 in Proceedings of the ICALEO 2010, Ed. LIA (ISBN 978-0-912035-61-1) Anaheim (CA), USA, September, 26-30, 2010. Impact, EM.
wa1279 G.R.B.E. Römer, A.J. Huis in 't Veld,, Matlab laser toolbox, pp. 413-419 in Proceedings of the 6th International Conference and Exhibition on Laser Assisted Net Shape Engineering,LANE 2010, Ed. Elsevier (ISBN 1875-3892) Erlangen, Germany, September, 21-24, 2010. Impact, EM, part 2.
wa1283 J.V. Obona, V. Ocelik, B. Visser, J.Th.M. De Hosson, J.Z.P. Skolski, V.S. Mitko, G.R.B.E. Römer, A.J. Huis in `t Veld, Microscopy study of ripples created on steel surface by use of ultra short laser pulses, No pages in Proceedings of the 24th International Conference on Surface Modification Technologies (SMT 24) (No ISBN or ISSN) Dresden, Germany, September, 7-9, 2010. M2i, Impact, EM.
wa1286 C. De Persis, M. Cao, Guiding one-dimensional formations of mobile agents with coarsely quantized information, No pages in Proceedings of the 2nd IFAC workshop on estimation and control of networked systems, NecSys'10 (No ISBN or ISSN) Annecy, France, September, 13-14, 2010. Impact, DISC.
wa1287 C. De Persis, C.S. Kallesoe, Quantized pressure control in large-scale nonlinear hydraulic networks, No pages in Proceedings of the 49th IEEE conference on decision and control (No ISBN or ISSN) Atlanta, GA, USA, December, 15-17, 2010. Impact, DISC.
wa1288 C. De Persis, M. Cao, H. Liu, Control of one-dimensional guided formations using coarsely quantized information, No pages in Proceedings of the 49th IEEE conference on decision and control (No ISBN or ISSN) Atlanta, GA, USA, December, 15-17, 2010. Impact, DISC.
wa1289 S. Rowell, A.A. Popov, J.P. Meijaard, Predictive control to modelling motorcycle rider steering, International Journal of Vehicle Systems Modelling and Testing (ISSN 1745-6436) 5 (2/3) pp. 124-160 (2010). Impact, EM, ISSN (online) 1745-6444.
wa1290 G. Oosterhuis, A.J. Huis in 't Veld, G. Ebberink, D. Arnaldo del Cerro, E. van den Eijnden, P. Chall, Additive interconnect fabrication by picosecond laser induced forward transfer, No pages in Proceeding of the IEEE International 3D Systems Integration Conference 2010, 3DIC (No ISBN or ISSN) Munich, Germany, November, 16-18, 2010. Impact, EM.
wa1291 A.L. Schwab and J.P. Meijaard (eds), Proceedings of Bicycle and Motorcycle Dynamics 2010, 978 94911 04015, Delft University of Technology, October, 19-22, 2010. Impact, EM, DISC.
wa1292 V. van der Wijk, Actief dynamisch balanceren voor snelheid en precisie, Mechatronica Magazine (ISSN 1879-6451) 4 (5) pp. 32-35 (2010). Impact, EM.
wa1293 S.A. Spijksma, Analysis and MIMO control of a 6 DOFs parallel kinematic precision manipulator, Report no. wa1293, December, 10, 2010. Impact, EM, DISC.
wa1294 H.M.J.R. Soemers, Design Priniciples for Precision Mechanisms, 978-90-365-3103-0, T-Point Print VoF, 15-12-2010, 2010. Impact, DISC.
wa1295 T.Sibillano, A. Ancona, D. Rizzi, S. Saludes Rodil, J. Rodriguez Nieto, A.R. Konuk, R.G.K.M. Aarts, A.J. Huis in 't Veld, Study on the correlation between plasma electron temperature and penetration depth in laser welding processes, pp. 429-436 in Physics Procedia, Volume 5, Part 2 - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Ed. M. Schmidt, F. Vollertsen, M. Geiger (ISSN 1875-3892) Erlangen, Germany, Elsevier, September, 21-24, 2010. Impact, DISC. DOI: 10.1016/j.phpro.2010.08.070.
wa1296 Steven Boer and Tjeerd van der Poel, SpaVisual User Manual, Report no. wa1296, March, 2011. EM.
wa1297 Hans Kroes, Feasibility of picosecond pulsed laser drilling of micro holes in multi-C Silicon - for the production of back-contact solar cells, Report no. wa1297, March 30, 2011.
wa1298 J.W.A. Vaandrager, Design, modeling and optimisation of an underactuated compliant gripper, Report no. wa1298, March 3, 2011.
wa1299 R.G.K.M. Aarts, J.P. Meijaard and J.B. Jonker, SPACAR User Manual, Report no. wa1299, March, 2011. EM, DISC.
wa1301 J. D. G. Kooijman, J. P. Meijaard, Jim M. Papadopoulos, Andy Ruina, A. L. Schwab, A bicycle can be self-stable without gyroscopic or caster effects, Science (ISSN 0036-8075) 332 pp. 339-342 (2011). EM. DOI: 10.1126/science.1201959.
wa1302 P. de Jong, Feedback control of an active dynamic balancer, Report no. wa1302, June 9, 2011.
wa1303 M. Krijnen, Modelling the friction induced behaviour of a compliant guidewire in a guiding tube, Report no. wa1303, June 10, 2011. EM.
wa1304 Bert van de Ridder, Analysis of a Coriolis Mass Flow Meter to reduce influence of external disturbances, Report no. wa1304, June 22, 2011.
wa1305 K.G.P. Folkersma, Design and evaluation of a 2-DOF large stroke stage with elastic elements, Report no. wa1305, June 28, 2011. EM.
wa1306 R. Jagdheesh, B. Pathiraj, E. Karatay, G. R. B. E. Römer, and A. J. Huis in‘t Veld, Laser-Induced Nanoscale Superhydrophobic Structures on Metal Surfaces, Langmuir (ISSN 0743-7463) 27 (13) pp. 8464–8469 (2011). Impact. DOI: 10.1021/la2011088.
wa1307 D. Tjepkema, J. van Dijk, H. M. J. R. Soemers, Performance Limits of Active Vibration Isolation Systems for Precision Equipment, pp. 23-26 in Proceedings of the 11th EUSPEN international conference, Ed. H. Spaan, P. Shore, H. van Brussel, T. Burke (ISBN 978-0-9553082-9-1) Lake Como, Italy, May 23-27, 2011. DISC.
wa1308 B. Krijnen, D. M. Brouwer, Position control of a MEMS stage with integrated sensor, pp. 105-108 in Proceedings of the 11th EUSPEN international conference, Ed. H. Spaan, P. Shore, H. van Brussel, T. Burke (ISBN 978-0-9553082-9-1) Lake Como, Italy, May 23-27, 2011.
wa1309 G. Oosterhuis, B. Huis in’t Veld, P. Chall, 2D and 3D Interconnect Fabrication by Picosecond Laser Induced Forward Transfer, pp. 484-488 in Proceedings of the 11th EUSPEN international conference, Volume 2, Ed. H. Spaan, P. Shore, H. van Brussel, T. Burke (ISBN 978-0-9553082-9-1) Lake Como, Italy, May 23-27, 2011.
wa1310 A.R. Konuk, R.G.K.M. Aarts, A.J. Huis in ’t Veld, T. Sibillano, D. Rizzi, A. Ancona, Process Control of Stainless Steel Laser Welding using an Optical Spectroscopic Sensor, pp. 744-751 in Physics Procedia, Volume 12, Part 1, Lasers in Manufacturing 2011 - Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing, Ed. M. Schmidt, M. Zaeh, T. Graf and A. Ostendorf (ISSN 1875-3892) München, Germany, Elsevier, May 23-26, 2011. DISC. DOI: 10.1016/j.phpro.2011.03.093.
wa1311 J. Eichstädt, G.R.B.E. Römer, A.J. Huis in’t Veld, Towards Friction Control using laser-induced periodic Surface Structures, pp. 7-15 in Physics Procedia, Volume 12, Part 2, Lasers in Manufacturing 2011 - Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing, Ed. M. Schmidt, M. Zaeh, T. Graf and A. Ostendorf (ISSN 1875-3892) München, Germany, Elsevier, May 23-26, 2011. DOI: 10.1016/j.phpro.2011.03.099.
wa1312 V.S. Mitko, G.R.B.E. Römer, A.J. Huis in ‘t Veld, J.Z.P. Skolski, J.V. Obona, V. Ocelík, J.T.M. De Hosson, Properties of High-Frequency Sub-Wavelength Ripples on Stainless Steel 304L under Ultra Short Pulse Laser Irradiation, pp. 99-104 in Physics Procedia, Volume 12, Part 2, Lasers in Manufacturing 2011 - Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing, Ed. M. Schmidt, M. Zaeh, T. Graf and A. Ostendorf (ISSN 1875-3892) München, Germany, Elsevier, May 23-26, 2011. M2i. DOI: 10.1016/j.phpro.2011.03.111.
wa1313 Lin Li, Minghui Hong, Michael Schmidt, Minlin Zhong, Ajay Malshe, Bert Huis in’t Veld, and Volodymyr Kovalenko, Laser Nano-manufacturing – State of the Art and Challenges, CIRP Annals - Manufacturing Technology (ISSN 0007-8506) 60 (2) pp. 735-755 (2011). DOI: 10.1016/j.cirp.2011.05.005.
wa1314 S. E. Boer, R.G.K.M. Aarts, J. P. Meijaard, D.M. Brouwer, J.B. Jonker, A two-node superelement description for modelling of flexible complex-shaped beam-like components, pp. 1-13 (Cdrom) in Multibody Dynamics 2011, ECCOMAS Thematic Conference, Ed. J.C. Samin, P. Fisette (ISBN 978-2-8052-0116-5) Brussels, Belgium, July 4-7, 2011. EM.
wa1315 R.G.K.M. Aarts, J. van Dijk, D.M. Brouwer and J.B. Jonker, Application of flexible multibody modelling for control synthesis in mechatronics, pp. 1-10 (Cdrom) in Multibody Dynamics 2011, ECCOMAS Thematic Conference, Ed. J.C. Samin, P. Fisette (ISBN 978-2-8052-0116-5) Brussels, Belgium, July 4-7, 2011. EM.
wa1316 R.G.K.M. Aarts, S.E. Boer, J.P. Meijaard, D.M. Brouwer, J.B. Jonker, Analyzing overconstrained design of compliant mechanisms, pp. 1-10 (Cdrom) in Proceedings of ASME 2011 International Design Engineering Technical Conference & Computers and Information in Engineering Conference - IDETC/CIE 2011 (No ISBN or ISSN) Washington, DC, USA, August 28–31, 2011. EM.
wa1317 Emre Dikmen, Peter J. M. van der Hoogt, André de Boer, Ronald G. K. M. Aarts, Ben Jonker, Design of an Experimental Setup for Testing Multiphysical Effects on High Speed Mini Rotors, Journal of Mechanical Design (ISSN 1050-0472) 133 (5) pp. 051009 (9 pages) (2011). EM. See also: http://doc.utwente.nl/77383/. , DOI: 10.1115/1.4004003.
wa1318 V. van der Wijk, S. Krut, F. Pierrot, J.L. Herder, Genetic method for derivingthe general shaking force balance conditions of parallel manipulators with application to a redundant planar 4-RRR parallel manipulator, pp. A12-523, 1-9 in 13th World Congress in Mechanism and Machine Science (No ISBN or ISSN) Guanajuato, Mexico, June, 19-25, 2011.
wa1319 G.R.B.E. Römer, M.M.J. Jorritsma, D. Arnaldo del Cerro, B. Chang, V. Liimatainen, Quan Zhou, A.J. Huis in 't Veld, Laser micro-machining of hydrophobic-hydrophilic patterns for fluid driven self-alignment in micro-assembly, pp. 1-10 in Proceedings of the 12th International Symposium on Laser Precision Microfabrication (No ISBN or ISSN) Takamatsu, Japan, June, 7-10, 2011. Impact, EM.
wa1320 D. Tjepkema, J. van Dijk, H.M.J.R. Soemers, Active vibration isolation in precision machines using sensor fusion, pp. 1-8 (Cdrom) in 18th International Congress on Sound and Vibration (ISCV) (ISBN 978-85-63243-01-0) Rio de Janeiro, Brazil, July, 10-14, 2011. DISC.
wa1321 R.G.K.M. Aarts, J.P. Meijaard and J.B. Jonker, Flexible multibody modelling for exact constraint design of compliant mechanisms, Multibody Systems Dynamics (ISSN 1384-5640) 27 (1) pp. 119-133 (2012). EM. DOI: 10.1007/s11044-011-9272-9.
wa1322 A. Haan, Gravity balancing with rubber and an application in a back support mechanism, Report no. wa1322, July, 07, 2011.
wa1323 Ronald Dieterman, Design of a compliant BioMEMS gripper for the mechanical characterization of biological cells, Report no. wa1323, July 14, 2011.
wa1324 R. Pohl, Literature review: laser induced forward transfer, Report no. wa1324, July, 2011.
wa1325 J.P. Khatait, M. Krijnen, J.P. Meijaard, R.G.K.M. Aarts, D.M. Brouwer and J.L. Herder, Modelling and simulation of a flexible endoscopic surgical system, pp. 1-10 (Cdrom) in Proceedings of the ASME 2011, International Mechanical Engineering Congress & Exposition - IMECE2011 (No ISBN or ISSN) Denver, Co., USA, November, 13-17, 2011.
wa1326 Hieu Trinh, Feedback control design on one-dimensional and three-dimensional hard mount vibration isolation setups, Report no. wa1326, August, 26, 2011.
wa1327 G.R.B.E. Römer, Dictaat "Laser materials processing" 2011-2012, vakcode 113740, Report no. wa1327, August, 2011.
wa1328 A.R. Konuk, R.G.K.M. Aarts, A.J. Huis in 't Veld, T. Sibillano, D. Rizzi, A. Ancona, Closed loop control of laser welding using an optical spectroscopic sensor for Nd:Yag and CO2 lasers, pp. 85-94 in Proceedings of the ICALEO 2011, Ed. LIA (ISBN 978-0-912035-61-1) Orlando (Fl), USA, October, 23-27, 2011. DISC.
wa1329 G.R.B.E. Römer, Dictaat "Systeemanalyse" 2011-2012, vakcode 113117, Report no. wa1329, September, 2011. DISC.
wa1330 B. Krijnen, R.P. Hogervorst J.W. van Dijk, D.M. Brouwer, J.B.C. Engelen, L. Woldering, L. Abelmann, H.M.J.R. Soemers, A single-mask thermal displacement sensor in MEMS, Journal of Micromechanics and Microengineering (ISSN 0960-1317) 21 (7) pp. 074007-074019 (2011). Mesa+. See also: http://doc.utwente.nl/77582/. , DOI: 10.1088/0960-1317/21/7/074007.
wa1331 S. Kodandaramaiah, M. Krijnen, J. Go, S. Malik, J.P. Khatait, R.G.K.M. Aarts, D.M. Brouwer, C. Forest, Characterization of translation of fused silica micropipettes in non-rectilinear trajectories, pp. 1-4 (Cdrom) in Proceedings of the 26th Annual Meeting of the ASPE (No ISBN or ISSN) Denver (Co), USA, November, 13-18, 2011.
wa1332 D.M. Brouwer, S.E. Boer, R.G.K.M. Aarts, J.P. Meijaard, J.B. Jonker, Freedom and constraint analysis and optimization, pp. 1-4 (Cdrom) in Proceedings of the 26th Annual Meeting of the ASPE (No ISBN or ISSN) Denver (Co.), USA, November, 13-18, 2011. EM.
wa1333 S. Langius, 3D modeling and simulation of a moment exchange unicycle robot, Report no. wa1333, September, 30, 2011. EM.
wa1334 M. Jorritsma, Literature review on self-assembly and self-alignment, Report no. wa1334, September, 2011.
wa1335 M. Jorritsma, The feasibility of picosecond pulsed laser created surface modifications for self-alignment, Report no. wa1335, October, 26, 2011.
wa1336 B. Krijnen, R. Hogervorst, J.W. van Dijk, J. Engelen, L. Woldering, D.M. Brouwer, L. Abelmann, H.M.J.R. Soemers, Towards accurate small-scale manipulation - A thermal displacement sensor in MEMS, Mikroniek (ISSN 0026-3699) 51 (4) pp. 5-11 (2011). Mesa+. See also: http://doc.utwente.nl/78419/.
wa1337 M. de Graaf, R.G.K.M. Aarts, Application of robotics in laser welding, pp. 401-421 in Laser welding technologies, Ed. S Katayama, 978-0-85709-264-9, Woodhead Publishing Ltd, May, 2013. EM, http://www.woodheadpublishing.com/en/book.aspx?bookID=2493. See also: http://doc.utwente.nl/87802/. , DOI: 10.1533/9780857098771.3.401.
wa1338 V. van der Wijk, J.L. Herder, Synthesis method for linkages with conter of mass at invariant link point-Pantograph based mechanisms, Mechanism and Machine Theory (ISSN 0094-114X) 48 pp. 15-28 (2012). DOI: 10.1016/j.mechmachtheory.2011.09.007.
wa1339 D. Tjepkema, J. van Dijk, H.M.J.R. Soemers, Sensor fusion for active vibration isolation in precision equipment, Journal of Sound and Vibration (ISSN 0022-460X) 331 (4) pp. 735-749 (2012). DISC. DOI: 10.1016/j.jsv.2011.09.022.
wa1340 J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, V.S. Mitko, J.V. Obona, V. Ocelik, J.T.M. de Hosson, Modeling of laser induced periodic surface structures, Journal of Laser Micro/Nanoengineering (ISSN 1880-0688) 5 (3) pp. 263-268 (2010). M2i. DOI: 10.2961/jlmn.2010.03.0015.
wa1341 A.J. Huis in 't Veld, Femto- and pico second laser micro-nano processing for patterning surface by removal and deposition of material, pp. 9-15 in Proceedings of the 8th International Concerence on Multi-Material Micro Manufacture, Ed. Heinz Kück, Holger Reinicke, Stefan Dimov (ISBN 978-981-07-0319-6) Stuttgart, Germany, Research Publishing, November, 8-10, 2011. DOI: 10.3850/978-981-07-0319-6_K002.
wa1342 Natallia Karlitskaya, Laser Die Transfer: laser-induced transfer of microcomponents, 978-90-365-3260-0, University of Twente, December,16, 2011. IPV. See also: http://purl.utwente.nl/publications/79027. , DOI: 10.3990/1.9789036532600.
wa1343 S.A.J. Spanjer, Improved grasp robustness through variable transmission ratios in underactuated fingers, University of Twente, Report no. wa1343, December, 22, 2011.
wa1344 V. van der Wijk, Taaie tiller, De Ingenieur (ISSN 0020-1146) 123 (20/21) pp. 62-65 (2011).
wa1345 V. van der Wijk, S.Ch. Krut, F. Pierrot, J.L. Herder, Manipulator comprising a fixed base and a movable platform, with four motordriven chains of articulated links, University of Twente, CNRS Paris, Université Montpellier 2, 2006960, June, 17, 2011.
wa1346 J.V. Obona, V. Ocelik, J.Z.P. Skolski, V.S. Mitko, G.R.B.E. Römer, A.J. huis in 't Veld, J.Th.M. De Hosson, On the surface topography of ultrashort laser pulse treated steel surfaces, Applied Surface Science (ISSN 0169-4332) 258 (4) pp. 1555-1560 (2011). M2i. DOI: 10.1016/j.apsusc.2011.09.130.
wa1347 T. Sibillano, A. Ancona, D. Rizzi, F. Mezzapesa, A.R. Konuk, R.G.K.M. Aarts, A.J. Huis in 't Veld, P.M. Lugara, Spectroscopic closed loop control of penetration depth in laser beam welding process, pp. 82390S (8 pages) in Proc. SPIE 8239, High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications, Ed. Eckhard Beyer; Timothy Morris (No ISBN or ISSN) San Francisco, California, USA, January 21, 2012. DISC. See also: http://purl.utwente.nl/publications/79403. , DOI: 10.1117/12.906778.
wa1348 K.H.J. Voss, A cable-driven manipulator for the interaction with large surface, Report no. wa1348, February, 9, 2012. cum laude.
wa1349 V. van der Wijk, Ontwerp van gebalanceerde bewegende constructies, Constructeur (ISSN 0010-6658) 50 (5) pp. 28-32 (2011).
wa1350 J.V. Obona, V. Ocelik, J.T.M. de Hosson, J.Z.P. Skolski, V.S. Mitko, G.R.B.E. Römer, A.J. Huis in 't Veld, Surface melting of copper by ultrashort laser pulses, pp. 1-9 in Proceedings of the 10th Conference on Surface Effects and Contact Mechanics, Ed. J.T.M. De Hosson, C.A. Brebbia (ISBN 978-1-84564-530-4, ISSN 1743-3533) Malta, September, 21-23, 2011. M2i. DOI: 10.2495/SECM110151.
wa1351 J.Z.P. Skolski, G.R.B.E. Römer, J.V. Obona, V. Ocelik, A.J. Huis in 't Veld, J.T.M. de Hosson, Laser-induced periodic surface structures: fingerprints of light localization, Physical Review B85 (ISSN 1098-0121/2012/85(7)/075320(9)) (2012). M2i. DOI: 10.1103/PhysRevB.85.075320.
wa1352 J. Vaandrager, J.L. Herder, A static balancer for a large-deflection compliant finger mechanism, pp. 56-57 in EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Ed. University of Twente (ISBN 978-90-365-3338-6) Enschede, the Netherlands, J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts, February, 27-29, 2012.
wa1353 V. van der Wijk, S.Ch. Krut, F. Pierrot, J.L. Herder, Experimental results for a high speed dynamically balanced redundant planar 4-RRR parallel manipulator, pp. 60-61 in EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Ed. J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts (ISBN 978-90-365-3338-6) Enschede, the Netherlands, February, 27-29, 2012.
wa1354 J.P. Khatait, D.M. Brouwer, R.G.K.M. Aarts,J.L. Herder, Test set-up to study the behaviour of a flexible instrument in a bent tube, pp. 1 in Proceedings of the ASME Design of Medical Devices Conference (No ISBN or ISSN) No address, April, 10-12, 2012.
wa1355 J. van Dijk, R.G.K.M. Aarts, Analytical one parameter method for PID motion controller settings, pp. 223-228 in Proceedings of the 2nd IFAC Conference on Advances in PID Control (ISBN 978-3-902823-18-2) Brescia, Italy, March, 28-30, 2012. EM, DISC. DOI: 10-3182/20120328-3-IT-3014.00038.
wa1356 J.B. Jonker, J.P. Meijaard, Deformation modes and dual stress resultants of spatial beam elements in large deflection multibody system analyses, pp. 1-10 in Proceedings of the 2nd Joint International Conference on Multibody System Dynamics (ISBN ISBN 978-3-927618-32-9) Stuttgart, Germany, May, 29-June, 1, 2012. EM.
wa1357 M.S. Groen, D.M. Brouwer, R.J. Wiegerink, J.C. Lötters, Design considerations for a micromachined proportional control valve, Micromachines 2012 (ISSN 2072-666X) 3 (2) pp. 396-412 (2012). DOI: 10.3390/mi3020396.
wa1358 D. ten Hoopen, Model order reduction of non-linear flexible multibody systems within the framework of Spacar, University of Twente, Report no. wa1358, May, 24, 2012.
wa1359 P. Brinkhuis, A four-DOF balanced neck mechanism for a humanoid head, University of Twente, Report no. wa1359, May, 24, 2012.
wa1360 D.H. Wiersma, Performance optimization of large stroke spatial flexure hinges, University of Twente, Report no. wa1360, 2012. EM, cum laude.
wa1361 V. van der Wijk, J.L. Herder, The work of Otto Fischer and the historical development of his method of principal vectors for mechanism and machine science, pp. 521-534 in Proceedings of the IFToMM, 4th congress on History of Machines and Mechanisms, Ed. T. Koetsier, M. Ceccarelli (ISBN 978-94-007-4131-7, ISSN 1875-3442) Amsterdam, the Netherlands, Springer 2012, May, 07-11, 2012. DOI: 10.1007/978-94-007-4132-4.
wa1362 D. Arnaldo del Cerro, CleanSky JTI-SFWA WP113: 2012 input for deliverable, University of Twente, faculteit CTW, Enschede, University of Twente, June, 27, 2012.
wa1363 D. Tjepkema, J. van Dijk, H.M.J.R. Soemers, A mode shaping modal controller for six DOFs active vibration isolation, pp. 455-458 in Proceedings of the International Conference and Exhibition on New actuators and drive sytems, Ed. Hubert Borgmann (ISBN 978-3-933339-19-5) Bremen, Germany, June, 18-20, 2012. DISC.
wa1364 J.Z.P. Skolski, G.R.B.E. Römer, J.V. Obona, V. Ocelik, A.J. Huis in 't Veld, J.T.M. de Hosson, Inhomogeneous absorption of laser radiation: Trigger of LIPSS formation, pp. 5 in Proceedings of LPM2012-the 13th International Symposium on Laser Precision Microfabrication (ISSN 1880-0688) Washington, USA, Elsevier, June, 11-14, 2012. M2i. See also: http://purl.utwente.nl/publications/80980.
wa1365 G.R.B.E. Römer, D. Arnaldo del Cerro, M.M.J. Jorritsma, R. Pohl, B. Chang, V. Liimatainen, Quan Zhou, A.J. Huis in 't Veld, Laser micro-machining of sharp edged receptor sites in pulyimide for fluid driven self-alignment, pp. 7 in Proceedings of LPM2012 - the 13th International Symposium on Laser Precision Microfabrication (ISSN 1880-0688) Washington, USA, Elsevier, June, 11-14, 2012. See also: http://purl.utwente.nl/publications/80603.
wa1366 M. Beijen, Multi-sensor control in active vibration isolation, University of Twente, Report no. wa1366, August, 24, 2012. DISC, cum laude.
wa1368 J.J. de Jong, A.H.A. Stienen, V. van der Wijk, M. Wessels, H. van der Kooij, A method for evaluation and comparison of parallel robots for safe human interaction, applied to robotic TMS, pp. 986-991 in Proceedings of the 4th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics, Ed. IEEE Robotics and Automation Society (ISBN 978-1-4577-1199-2) Rome, Italy, June, 24-27, 2012. DOI: 10.1109/BioRob.2012.6290837.
wa1369 V. van der Wijk, J.L. Herder, On the addition of degrees of freedom to force-balanced linkages, pp. 51-58 in Proceedings of the 19th CISM-IFToMM Symposium on Robot Design, Dynamics, and Control, Ed. V. Padois, Ph. Bidaud, O. Khatib (ISBN 978-3-7091-1378-3, ISSN 0254-1971) Paris, Romansy, France, Springer, June, 12-15, 2012. DOI: 10.1007/978-3-7091-1379-0.
wa1370 S.E. Boer, D. ten Hoopen, R.G.K.M. Aarts, W.B.J. Hakvoort, J.B.Jonker, Model reduction for efficient time-integration of planar non-linear flexible multibody models, pp. 1-10 in Proceedings of the 2nd Joint International Conference on Multibody System Dynamics (ISBN 978-3-927618-32-9) Stuttgart, Germany, May 29- June 1, 2012. EM.
wa1371 P.C. Verburg, G.R.B.E. Römer, G.M.H. Knippels, J. Betz, A.J. Huis in 't Veld, Experimental validation of model for pulsed laser-induced subsurface modifications in Si, No pages in Proceedings of LPM2012, the 13th International Symposium on Laser Precision Microfabrication (ISSN 1880-0688) Washington, USA, June, 11-14, 2012. Metis ID: 286925. See also: http://purl.utwente.nl/publications/80943.
wa1372 V. van der Wijk, J.L. Herder, Inherently balanced 4R four-bar based linkages, pp. 309-316 in Proceedings of the IFToMM 13th International Symposium on Advances in Robot Kinematics, Ed. J. Lenarcic, M. Husty (ISBN 978-94-007-4619-0) Innsbruck, Austria, Springer, June, 24-28, 2012. DOI: 10.1007/978-94-007-4620-6.
wa1373 K.H.J. Voss, V. van der Wijk, J.L. Herder, Investigation of a cable-driven parallel mechanism for interaction with a variety of surface, applied to the cleaning of free-form buildings, pp. 261-268 in Proceedings of the IFToMM 13th International Symposium on Advances in Robot Kinematics, Ed. J. Lenarcic, M. Husty (ISBN 978-94-007-4619-0) Innsbruck, Austria, Springer, June, 24-28, 2012.
wa1374 V. van der Wijk, B. Demeulenaere, C.M. Gosselin, J.L. Herder, Comparative analysis for low-mass and low-inertia dynamic balancing of mechanisms, ASME Journal of Mechanisms and Robotics (ISSN 1942-4302) 4 (3) pp. 8, 0311008 (2012). DOI: 10.1115/1.4006744.
wa1375 A.S.T. Stapelbroek, Stageverslag: investigation and improvement of a friction-based joint lock (vertrouwelijk), Report no. wa1375, July, 2012.
wa1376 K. Swinkels, Optimization and control of a MEMS-based large stroke three-DOF precision stage, University of Twente, Report no. wa1376, August, 30, 2012.
wa1377 A. Westerhuis, Design and evaluation of a 3-DOF spherical parallel mechanism for domistic robot arms, University of Twente, Report no. wa1377, August, 30, 2012.
wa1378 W.M. Nikshi, Design and implementation of force controller for Philips experimental robot arm, University of Twente, Report no. wa1378, August, 17, 2012.
wa1379 J. Pocorni, Penetration depth control using an optical spectroscopic sensor in Nd:YAG laser welding, University of Twente, Report no. wa1379, August, 17, 2012.
wa1380 D. Tjepkema, Active hard mount vibration isolation for precision equipment, 9789036534185, University of Twente, November, 2, 2012. DISC. See also: http://doc.utwente.nl/82175/. , DOI: 10.3990/1.9789036534185.
wa1381 R. de Boef, Decoupled MIMO control, University of Twente, Report no. wa1381, August, 30, 2012. DISC.
wa1382 R.G.K.M. Aarts, Dictaat: Systems and Control for mechatronic systems 2012-2013, vakcode 201200176, University of Twente, faculteit CTW, Enschede, the Netherlands, August, 2012. EM, DISC.
wa1383 K.G.P. Folkersma, S.E. Boer, D.M. Brouwer, J.L. Herder, H.M.J.R. Soemers, A 2-DOF large stroke flexure-based positioning mechanism, pp. 8 pages in Proceedings of ASME 2012 International Design Engineering Technical Conference & Computers and Information in Engineering Conference - IDETC/CIE 2012 (No ISBN or ISSN) Chicago, Il, USA, August, 12-15, 2012. EM, cd-rom: [DETC2012 70377], Order No. I897DV.
wa1384 J.P. Meijaard, R.G.K.M. Aarts, D.M. Brouwer, Modelling and simulation of the motion of a slender beam in a tube, pp. 1-10 in Proceedings of the 2nd Joint International Conference on Multibody System Dynamics (ISBN ISBN 978-3-927618-32-9) Stuttgart, Germany, May, 29-June, 1, 2012. EM.
wa1385 B. Peerdeman, G.J. Pieterse, H. Rietman, E. Hekman, D.M. Brouwer, Sarthak Misra, Development of joint locks for multifunctional hand protheses, pp. 488-493 in Proceedings of the Fourth IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (ISBN 978-1-4577-1199-2) Rome, Italy, June, 24-27, 2012. DISC, digital: ISBN 2155-1774. DOI: 10.1109/BioRob.2012.6290798.
wa1386 R.G.K.M. Aarts, D.M. Brouwer, J.P. Meijaard, J.B. Jonker, Selection of dependent and independent coordinates in a flexible multibody model using SVD, pp. 8 pages in Proceedings of the 2nd Joint International Conference on Multibody System Dynamics (ISBN 978-3-927618-32-9) Stuttgart, Germany, May, 29-June, 1, 2012. EM.
wa1387 B. Krijnen, D.M. Brouwer, A closed-loop large range of motion positioning system in MEMS, No pages in Proceedings of the Conference on Precision Mechatroncs (No ISBN or ISSN) Deurne, the Netherlands, Dutch Society of Precision Engineering, September, 4-5, 2012.
wa1388 D.M. Brouwer, S.E. Boer, K.G.P. Folkersma, H. Jacobs, R.G.K.M. Aarts, J.L. Herder, Flexure hinge with a high support stiffness in a large range of motion, No pages in Proceedings of the Conference on Precision Mechatronics (No ISBN or ISSN) Deurne, the Netherlands, Dutch Society of Precision Engineering, September, 4-5, 2012. EM.
wa1389 J.P. Khatait, D.M. Brouwer, J.P. Meijaard, R.G.K.M. Aarts,J.L. Herder, 3-D multibody modelling of a flexible surgical instrument inside an endoscope, pp. 10 in Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition (No ISBN or ISSN) Houston, Texas, USA, November, 9-15, 2012.
wa1390 T. Sibillano, D. Rizzi , F.P. Mezzapesa , P.M. Lugarà , A.R. Konuk , R.G.K.M. Aarts, A.J. Huis In ’t Veld , A. Ancona, Closed Loop Control of Penetration Depth during CO2 Laser Lap Welding Processes, Sensors (ISSN 1424-8220) 12 (8) pp. 11077-11090 (2012). See also: http://purl.utwente.nl/publications/81839. , DOI: 10.3390/s120811077.
wa1391 W. Benthem, New metrics for quantifying the shaking force unbalance, applied to a 2-DOF parallel manipulator, University of Twente, Report no. wa1391, September, 29, 2012.
wa1392 G.R.B.E. Römer, Dictaat "Systeemanalyse" editie 2012-2013, vakcode 191131170, University of Twente, faculteit CTW, Enschede, the Netherlands, September, 2012. DISC.
wa1393 D.H. Wiersma, S.E. Boer, R.G.K.M. Aarts, D.M. Brouwer, Large stroke performance optimization of spatial flexure hinges, pp. 10 pages in Proceedings of ASME 2012 International Design Engineering Technical Conference & Computers and Information in Engineering Conference - IDETC/CIE 2012 (No ISBN or ISSN) Chicago, Il, USA, August, 12-15, 2012. EM, cd-rom: [DETC2012 70377], Order No. I897DV.
wa1394 R. Pohl, G.R.B.E. Römer, M.B. Hoppenbrouwers, A.J. Huis in 't Veld, Characterization of metal sprays created by a picosecond Laser-Induced Forward Transfer (LIFT) process, pp. 409-415 in Proceedings of the LANE 2012, Physics Proceedings 39, Ed. Elsevier (ISSN 1875-3892) Fürth, Germany, November, 12-15, 2012.
wa1395 G.R.B.E. Römer, D. Arnaldo del Cerro, R. Pohl, B. Chang, V. Liimatainen, Q. Zhou, A.J. Huis in 't Veld, Picosecond laser machining of metallic and polymer substrates for fluidic self-alignment, pp. 628-635 in Proceedings of the LANE 2012, Physics Proceedings 39, Ed. Elsevier (ISSN 1875-3892) Fürth, Germany, November, 12-15, 2012. DOI: 10.1016/j.phpro.2012.10.082.
wa1396 S.A.J. Spanjer, R. Balasubramanian, J.L. Herder, A.M. Dollar, Improved Grasp Robustness through Variable Transmission Ratios in Underactuated Fingers, pp. 2289-2294 in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, OROS 2012 (ISBN 978-1-4673-1737-5) Vilamoura, Algarve, Portugal, October, 7-12, 2012. DOI: 10.1109/IROS.2012.6385884.
wa1397 S.A.J. Spanjer, R. Balasubramanian, A.M. Dollar, J.L. Herder, Underactuated Gripper that is able to Convert from Precision to Power Grasp by a Variable Transmission Ratio, pp. 669-679 in Proceedings of the ReMAR 2012 - 2nd ASME/IEEE International Conference on Reconfigurable Mechanisms and Robots, Chapter 60, Ed. J. S. Dai et al (No ISBN or ISSN) Tianjin, China, Springer-Verlag London 2012, July, 9-11, 2012. Advances in Reconfigurable Mechanisms and Robots I. DOI: 10.1007/978-1-4471-4141-9_60.
wa1398 D. Arnaldo del Cerro, A. Gómez Marín, G.R.B.E. Römer, B. Pathiraj, D. Lohse, A.J. Huis in‘t Veld, Leidenfrost point reduction on micro-patterned metallic surfaces, Langmuir (ISSN 0743-7463) 28 (42) pp. 15106 - 15110 (2012). DOI: 10.1021/la302181f.
wa1399 K.H.J. Voss, V. van der Wijk, J.L. Herder, A Cable-Driven Parallel Mechanism for the Interaction with Hemispherical Surfaces, No pages in Proceedings of the IFToMM 4th EUCOMES (No ISBN or ISSN) Santander, Spain, September, 18-22, 2012.
wa1400 Gomez Marín, A., D. Arnaldo del Cerro, G.R.B.E. Römer, B. Pathiraj, A.J. Huis in 't Veld, D. Lohse, Capillary droplets on Leidenfrost micro-ratchets, Physics of Fluids (ISSN 1070-6631) 24 (12) pp. 122001 (10 pages) (2012). DOI: 10.1063/1.4768813.
wa1401 V. van der Wijk, J.L. Herder, The Method of Principal Vectors for the Synthesis of shaking Moment Balanced Linkages, No pages in Proceedings of the IFToMM 4th EUCOMES (No ISBN or ISSN) Santander, Spain, September, 18-22, 2012.
wa1402 D. Scorticati, J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, M. Workum, M. Theelen, M. Zeman, Thin film surface processing by ultrashort laser pulses (USLP), pp. nr. 8438 in Proceedings of the SPIE Photonics Europe (No ISBN or ISSN) Brussels, Belgium, April, 16-19, 2012. M2i. DOI: 10.1117/12.922270.
wa1403 K.H.J. Voss, V. van der Wijk, J.L. Herder, System for moving a mobile tendon controlled platform robot, hodn Stefan Spanjer, NL48886, September, 17, 2012.
wa1404 J.P. Khatait, D.M. Brouwer, R.G.K.M. Aarts, J.L. Herder, Modeling of a Flexible Instrument to Study its Sliding Behavior Inside a Curved Endoscope, Journal of Computational and Nonlinear Dynamics (ISSN 1555-1415) 8 (3) pp. 031002 (10 pages) (2013). See also: http://doc.utwente.nl/87598/. , DOI: 10.1115/1.4007539.
wa1405 J. Eichstädt, G.R.B.E. Römer, A.J. Huis in 't Veld, Determination of irradiation parameters for laser-induced periodic surface structures, Applied Surface Science (ISSN 0169-4332) 264 (1) pp. 79-87 (2013). See also: http://doc.utwente.nl/84984/. , DOI: 10.1016/j.apsusc.2012.09.120.
wa1406 G.R.B.E. Römer, Dictaat "Laser Material Processing" editie 2012-2013, vakcode 113740, University of Twente, faculteit CTW, Enschede, the Netherlands, November, 2012.
wa1407 W. Wijma, Modal measurements and model corrections of a large stroke compliant mechanism, University of Twente, Report no. wa1407, December, 07, 2012. EM.
wa1408 D.M. Brouwer, J.P. Meijaard, J.B. Jonker, Large deflection stiffness analysis of parallel prismatic leaf-spring flexures taking into account shearing, constrained warping and anticlastic curving effects, Precision Engineering (ISSN 0141-6359) 37 (3) pp. 505-521 (2013). See also: http://doc.utwente.nl/87888/. , DOI: 10.1016/j.precisioneng.2012.11.008.
wa1409 S.E. Boer, R.G.K.M. Aarts, W.B.J. Hakvoort, Model reduction for efficient time-integration of spatial flexible multibody models, Multibody System Dynamics (ISSN 1384-5640) 31 (1) pp. 69-91 (2014). EM. See also: http://doc.utwente.nl/87643/. , DOI: 10.1007/s11044-013-9346-y.
wa1410 J. van Dijk, Dictaat: System and Control Design 2, editie 2012-2013, vakcode 191131161, University of Twente, faculteit CTW, Enschede, the Netherlands, February, 2013.
wa1411 R. Meulekamp, The contribution of nanoscale surface features on the wetting properties of laser generated super hydrophobic surfaces, University of Twente, Report no. wa1411, February, 05, 2013.
wa1412 S.A.J. Spanjer, Investeerder gezocht, TOM - Twents Ondernemers Magazine (ISSN 9771871128001) pp. 127 (2012).
wa1413 F. Roozeboom, B. Kniknie, A.M. Lankhorst, G. Winands, R. Knaapen, P. Poodt, G. Dingemans, W. Keuning, W.M.M. Kessels, J.E. Bullema, P.M.M.C. Bressers, G. Oosterhuis, M. Mueller and A.J. Huis in't Veld, Technology alternatives towards low-cost and high-speed interconnect manufacturing, pp. 9 in Proc. 12th Annual PanPacific Microelectronics Symposium, PanPac 2012 (No ISBN or ISSN) Kauai, Hawaii, USA, February, 14-18, 2012.
wa1414 D. Scorticati, G.R.B.E. Römer, D.F. de Lange, A.J. Huis in 't Veld, Ultra-short-pulsed laser-machined nanogratings of laser-induced periodic surface structures on thin molybdenum layers, J. Nanophotonics (ISSN 1934-2608) 6 (1) pp. 063528 (11 pages) (2012). DOI: 10.1117/1.JNP.6.063528.
wa1415 D.M. Brouwer, S.E. Boer, J.P. Meijaard, R.G.K.M. Aarts, Optimization of release locations for small self-stress large stiffness flexure mechanisms, Mechanism and Machine Theory (ISSN 0094-114X) 64 pp. 230-250 (2013). EM. See also: http://doc.utwente.nl/87783/. , DOI: 10.1016/j.mechmachtheory.2013.01.007.
wa1416 S.E. Boer, D. ten Hoopen, R.G.K.M. Aarts, W.B.J. Hakvoort, J.B.Jonker, Model reduction for efficient time-integration of planar flexible multibody models, International Journal of Non-linear Mechanics (ISSN 0020-7462) 53 pp. 75-82 (2013). EM. See also: http://doc.utwente.nl/87642/. , DOI: 10.1016/j.ijnonlinmec.2013.01.009.
wa1417 J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts, EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design - Program and abstracts, 978-90-365-3338-6, Univerity of Twente, February, 27-29, 2012. EM, DISC.
wa1418 R.G.K.M. Aarts, D. ten Hoopen, S.E. Boer and W.B.J. Hakvoort, Model order reduction of non-linear flexible multibody models, pp. 8-9 in EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Ed. J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts (ISBN 978-90-365-3338-6) Enschede, the Netherlands, February, 27-29, 2012. EM.
wa1419 J. P. Meijaard, Modelling and simulating the motion of a wire in a tube, pp. 32-33 in EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Ed. J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts (ISBN 978-90-365-3338-6) Enschede, the Netherlands, February, 27-29, 2012.
wa1420 L. van de Ridder, J. van Dijk, W.B.J. Hakvoort and J.C. Lötters, Influence of external damping on phase difference measurement of a Coriolis mass-flow meter, pp. 44-45 in EUROMECH Colloquium 524 - Multibody system modelling, control and simulation for engineering design, Ed. J.B. Jonker, W. Schiehlen, J.P. Meijaard and R.G.K.M. Aarts (ISBN 978-90-365-3338-6) Enschede, the Netherlands, February, 27-29, 2012.
wa1421 D.M. Brouwer, D.H. Wiersma, S.E. Boer, R.G.K.M. Aarts, Flexure joint for high precision relative movement of devices or parts of devices, University of Twente, 1901902, EP12194573.7, November, 28, 2012. EM.
wa1422 M. Valefi, B. Pathiraj, M. van Rooij, E. de Vries, D.J. Schipper, Influence of countersurface materials on dry sliding performance of CuO/Y-TZP composite at 600◦C, Journal of the Eiropean Ceramic Society (ISSN 0955-2219) 32 pp. 4137-4147 (2012). DOI: http://dx.doi.org/10.1016/j.jeurceramicorg.2012.07.025.
wa1423 J. Z. P. Skolski, G. R. B. E. Römer, J. V. Obona, V. Ocelik, A. J. Huis in ‘t Veld and J. Th. M. De Hosson, Inhomogeneous Absorption of Laser Radiation Trigger of LIPSS Formation, JLMN-Journal of Laser Micro/Nanoengineering (ISSN 1880-0688) 8 (1) pp. 1-5 (2013). M2i. See also: http://doc.utwente.nl/84249/. , DOI: 10.2961/jlmn.2013.01.0001.
wa1424 X. Sedao, T.J.-Y. Derrien, G.R.B.E. Römer, B. Pathiraj, A.J. Huis in 't Veld, Laser surface micro-/nanostructuring by a simple transportable microshere lens array, Journal Applied Physics (ISSN 0021-8979) 112 (10) pp. 1-9 (2012). See also: http://purl.utwente.nl/publications/82289.
wa1425 X. Sedao, T.J.Y. Derrien, G.R.B.E. Römer, B. Pathiraj, A.J. Huis in 't Veld, Large area laser surface micro/nano patterning by contact microsphere lens arrays, Appl Phys A-Mater (ISSN 0947-8396) 111 (3) pp. 701-709 (2013). See also: http://doc.utwente.nl/85148/. , DOI: 10.1007/s00339-013-7651-1.
wa1426 G.R.B.E. Römer, Laser induced die transferring and patterning, pp. 2 in A workshop during the IEEE International Conference on Robotics and Automation, ICRA2013 (No ISBN or ISSN) Karlsruhe, Germany, May, 6-10, 2013.
wa1427 P.C. Verburg, G.R.B.E. Römer, A.J. Huis in 't Veld, Two-temperature model for pulsed-laser-induced subsurface modifications in Si, Applied Physics A (ISSN 0947-8396) pp. 1-10 (2013). Springer-Verlag Berlin Heidelberg 2013. See also: http://doc.utwente.nl/86584/. , DOI: 10.1007/s00339-013-7668-5.
wa1428 J. Eichstädt, A.J. Huis in 't Veld, Analysis of irradiation processes for laser-induced periodic surface structures, pp. 650-660 in Physics Procedia (2013) of the Lasers in Manufacturing Conference 2013, Ed. Elsevier (ISSN 1875-3892) München, Germany, German Scientific Laser Society (WLT e.V.), May, 12-16, 2013. DOI: 10.1016/j.phpro.2013.03.129.
wa1429 K.-J. Gunnink, Design and optimization of a vacuum compatible 2-DOF flexure based precision manipulataor for high stiffness and eigenfrequencies, University of Twente, Report no. wa1429, May, 30, 2013.
wa1430 J.B. Jonker, J.P. Meijaard, A geometrically non-linear formulation of a three-dimensional beam element for solving large deflection multibody system problems, International Journal of Non-Linear Mechanics (ISSN 0020-7462) 53 pp. 63-74 (2013). See also: http://doc.utwente.nl/87641/. , DOI: 10.1016/j.ijnonlinmec.2013.01.012.
wa1431 V. van der Wijk, Shaking-moment balancing of mechanisms with principal vectors and momentum, Frontiers of Mechanical Engineering (ISSN 2095-0233) 8 (1) pp. 10-16 (2013). DOI: 10.1007/s11465-013-0359-2.
wa1432 S.E. Boer, R.G.K.M. Aarts, J.P. Meijaard, D.M. Brouwer, J.B. Jonker, A non-linear two-node superelement for use in flexible multibody systems, Multibody System Dynamics (ISSN 1384-5640) 31 (4) pp. 405-431 (2014). EM. See also: http://doc.utwente.nl/87782/. , DOI: 10.1007/s11044-013-9373-8.
wa1433 M. Hoogerkamp, R.R. Waiboer, R.G.K.M. Aarts, Modeling of flexible non-linear dynamic links in nano-positioning motion systems, pp. 287-296 in Proceedings of the Multibody Dynamics 2013 conference, Ed. Zdravko Terze, Milan Vrdoljak (ISBN 978-953-7738-22-8) Zagreb, Croatia, University of Zagreb, July, 1-4, 2013. DISC, cd-rom. See also: http://doc.utwente.nl/86542/.
wa1434 W. Wijma, S.E. Boer, R.G.K.M. Aarts, D.M. Brouwer, W. Hakvoort, Modal measurements and model corrections of a large stroke compliant mechanism, pp. 831-844 in Proceedings of the Multibody Dynamics 2013 conference, Ed. Zdravko Terze, Milan Vrdoljak (ISBN 978-953-7738-22-8) Zagreb, Croatia, University of Zagreb, July, 1-4, 2013. EM, cd-rom. See also: http://purl.utwente.nl/publications/86541.
wa1435 J. Zwijnenburg, Modelling and validation of cable structures including pulleys, surfaces and trusses, with application to a cable driven parallel manipulator, University of Twente, Report no. wa1435, July, 16, 2013.
wa1436 A. Emmens, Modelling and control of a large-span redundant 3 DOF cable robot, University of Twente, Report no. wa1436, July, 16, 2013.
wa1437 M. Hoogerkamp, Modelling and attenuation of cable schlepp disturbances on the wafer stage of a lithography machine, University of Twente, Report no. wa1437, July 12, 2013. DISC.
wa1438 G.R.B.E. Römer, BKO PORTFOLIO, Report no. wa1438, September, 2013.
wa1439 E. Elkink, Dynamic force balancing in a pick and place manipulator with variable payload, University of Twente, Report no. wa1439, July, 9, 2013.
wa1440 V. van der Wijk, S. Krut, F. Pierrot, J.L. Herder, Design and experimental evaluation of a dynamically balanced redundant planar 4-RRR parallel manipulator, The International Journal of Robotics Research (ISSN 0278-3649) 32 (6) pp. 744-759 (2013). DOI: 10.1177/0278364913484183.
wa1441 R. Pohl, C.W. Visser, G.R.B.E. Römer, C. Sun, A.J. Huis in 't Veld, D. Lohse, Droplet ejection in laser-induced forward transfer: mechanism for droplet fragmentation, pp. 1-5 in Proceedings of LAMP2013- the 6th International Congress on Laser Advanced Materials Processing (No ISBN or ISSN) Niigata, Japan, July, 22-25, 2013. Mesa+. See also: http://doc.utwente.nl/87363/.
wa1442 P.C. Verburg, G.R.B.E. Römer, A.J. Huis in 't Veld, Processing conditions for laser-induced subsurface modifications in Si, pp. 1-6 in Proceedings of the LAMP2013 - the 6th International Congress on Laser Advanced Materials Processing, Ed. Nature Publishing Group (No ISBN or ISSN) Niigata, Japan, JLPS, July, 23-26, 2013. Rewarded with the LPM2013 Outstanding Student Paper Awards. See also: http://purl.utwente.nl/publications/88673/.
wa1443 Jitendra Prasad Khatait, Motion and force transmission of a flexible instrument inside a curved endoscope, 978-90-365-0010-4, University of Twente, September, 5, 2013. DOI: 10.3990/1.9789036500104.
wa1444 G.R.B.E. Römer, Dictaat: Systeemanalyse, editie 2013-2014, vakcode 113117, University of Twente, Enschede, the Netherlands, September, 2013.
wa1445 D. Scorticati, A. Illiberi, G. R. B. E. Römer, T. Bor, W. Ogieglo, M. Klein Gunnewiek, A. Lenkferink, C. Otto, J. Z. P. Skolski, F. Grob, D. F. de Lange and A. J. Huis in 't Veld, Optical and electrical properties of SnO2 thin films after ultra-short pulsed laser annealing, pp. 12 in Proceedings SPIE 8826, Laser Material Processing for Solar Energy Devices II, 88260I (ISSN 0277-786X) San Diego, CA, USA, Edward W. Reutzel, August, 25-29, 2013. M2i, Mesa+. See also: http://doc.utwente.nl/87368/. , DOI: 10.1117/12.2023635.
wa1446 Wei Ya, J.F.Hernández-Sánchez, B. Pathiraj, A. J. Huis in 't Veld3,4, A study on attenuation of a Nd:YAG laser power by co-axial and off-axial nozzle powder stream during cladding, pp. 453-462 in Proceedings of the ICALEO 2013 (ISBN 978-0-912035-98-7) Miami, FL, USA, Ocotber, 6-10, 2013. M2i, Mesa+.
wa1447 L. van de Ridder, W.B.J. Hakvoort, J. van Dijk, J.C. Lötters, A. de Boer, Quantitative estimation of the influence of external vibrations on the measurement error of a Coriolis Mass-Flow Meter, pp. 10 in Proceedings of the 11th International Conference on Vibration Problems, Ed. Z. Dimitrovová et al. (ISBN 978-989-96264-4-7) Lisbon, Portugal, September, 9-12, 2013. abstracts published, USB. See also: http://doc.utwente.nl/89168/.
wa1448 F. Roozeboom, M. Smets, B. Kniknie, M. Hoppenbrouwers, G. Dingemans W. Keuning, W.M.M. Kessels, R. Pohl and A.J. Huis in't Veld, Alternative technology concepts for low-cost and high-speed 2D and 3D interconnect manufacturing, pp. 6 in Proceedings of the 46th IMAPS International Symposium on Microelectronics (No ISBN or ISSN) Orlando, FL, USA, September, 30-October, 3, 2013. cd-rom.
wa1449 J.O. Entzinger, M. Nijenhuis, T. Uemura, Sh. Suzuki, Assessment of Human Pilot Mental Workload in Curved Approaches, pp. 6 in Proceedings of the 2013 Asia-Pacific International Symposium on Aerospace Technology (APISAT-2013), Ed. JSASS, APISAT-2013 (ISSN 1875-3892) Takamatsy, Japan, November, 20-22, 2013.
wa1450 D.H. Wiersma, S.E. Boer, R.G.K.M. Aarts, D.M. Brouwer, Design and Performance Optimization of Large Stroke Spatial Flexures, ASME Journal of Computational and Nonlinear Dynamics (ISSN 1555-1415) 9 (1) pp. 011016 (10 pages) (2013). EM. See also: http://doc.utwente.nl/87781/. , DOI: 10.1115/1.4025669.
wa1451 J.P. Khatait, D.M. Brouwer, H.M.J.R. Soemers, R.G.K.M. Aarts, J.L. Herder, Design of an experimental set-up to study the behavior of a flexible surgical instrument inside an endoscope, Journal of Medical Devices (ISSN 1932-6181) 7 (3) pp. 031004 (12 pages) (2013). See also: http://doc.utwente.nl/87597/. , DOI: 10.1115/1.4024660.
wa1452 S. Spanjer, Constructor Award 2012 for Stefan Spanjer's robot hand design, Milroniek, Professional Journal of Precision Engineering (ISSN 0026-3699) 53 (1) pp. 25 (2013).
wa1453 G.R.B.E. Römer, Dictaat: Laser Materiaal Processing, editie 2013-2014, vakcode 113740, University of Twente, Enschede, the Netherlands, November, 2013.
wa1454 D.M. Brouwer, K.G.P. Folkersma, S.E. Boer, R.G.K.M. Aarts, Exact Constraint Design of a Two-Degree of Freedom Flexure-Based Mechanism, Journal of Mechanisms and Robotics (ISSN 1942-4302) 5 (4) pp. 041011 (10 pages) (2013). EM, eISSN 1942-4310. DOI: 10.1115/1.4025175.
wa1455 J.P. Meijaard, Fluid-Conveying Flexible Pipes Modeled by Large-Deflection Finite Elements in Multibody Systems, Journal of Computational and Nonlinear Dynamics (ISSN 1555-1415) 9 (1) pp. 011008 (7 pages) (2013). eISSN: 1555-1423. DOI: 10.1115/1.4025353.
wa1456 B. Peerdeman, S. Stramigioli, E. Hekman, D.M. Brouwer, S. Misra, Development of underactuated fingers with joint locking and electromyographic control, Mechanical Engineering Research (ISSN 1927-0607) 3 pp. 130-142 (2013). MIRA. DOI: 10.5539/mer.v3n1p130.
wa1457 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer, A.J. Huis in 't Veld, High precision laser forming for micro actuation, pp. nr.89671B in Proceedings of the SPIE, Vol. 8967, Ed. Y. Nakata, X. Xu, S. Roth, B. Neuenschwander (ISSN 0277-786X) San Francisco, CA, USA, February, 4-6, 2014. See also: http://purl.utwente.nl/publications/91603. , DOI: http://dx.doi.org/10.1117/12.2037675.
wa1458 K. Gunnink, R.G.K.M. Aarts, D.M. Brouwer, Performance optimization of large stroke flexure hinges for high stiffness and eigenfrequency, pp. 1-6 in Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering (ASPE) (No ISBN or ISSN) Saint Paul, MN, USA, ASPE, October, 20-25, 2013.
wa1459 J.P. Meijaard, B. Krijnen, D.M. Brouwer, Deflection of an eccentric tooth of a comb drive in an electrostatic field, pp. 7 in Proceedings of the ASME 2013 Conference IDETC/CIE (No ISBN or ISSN) Portland, Oregon, USA, August, 4-7, 2013. cd-rom. See also: http://doc.utwente.nl/87903/.
wa1460 A.J. Huis in ‘t Veld , M.B. Hoppenbrouwers, M. Giesbers, R. Pohl, G.R.B.E. Römer, C.W. Visser, C. Sun, D. Lohse, Imaging of copper ejection in pico- and nanosecond Laser Induced Forward Transfer, pp. 160-163 in Proceedings of the 10th International Conference on Multi Material Micro Manufacture, Ed. S. Azcárate, S.Dimov (ISBN 978-981-07-7247-5) San Sebastian, Spain, Research Publishing, October, 8-10, 2013. Mesa+, ISBN cd-rom: 978-981-07-7248-2.
wa1461 G.R.B.E. Römer, J.Z.P. Skolski, J. Vincenc Obona, J.Th.M. de Hosson, A.J. Huis in 't Veld, Laser-induced periodic surface structures: modelling, experiments and applications, pp. 10 in Proceedings of the SPIE, Part of Laser-based Micro- and Nanoprocessing VIII, 8968, Ed. U. Klotzbach, K. Washio, C.B. Arnold (ISSN 0277-786X) San Francisco, CA, USA, February, 4-6, 2014. DOI: 10.1117/12.2037541.
wa1462 J.P. Khatait, D.M. Brouwer, J.P. Meijaard, R.G.K.M. Aarts, J.L. Herder, Flexible Multibody Modeling of a Surgical Instrument Inside an Endoscope, Journal of Computational and Nonlinear Dynamics (ISSN 1555-1415) 9 (1) pp. 011018 (11 pages) (2013). DOI: 10.1115/1.4026059.
wa1463 J. van Dijk, Dictaat "System and Control Design 2" editie 2013-2014, vakcode 191131161, University of Twente, Enschede, January, 2014. DISC.
wa1464 S.E. Boer, Model reduction of flexible multibody systems, 978-90-365-3574-8, University of Twente, December, 5, 2013. EM, cum laude. DOI: 10.3990/1.9789036535748.
wa1465 B. Krijnen, K.R. Swinkels, D.M. Brouwer, J.L. Herder, Position control of a MEMS stage with integrated sensor, pp. 322-325 in Proceedings of the 13th EUSPEN International Conference of the EUROPEAN Society for Precision Engineering and Nano Technology (ISBN 978-0-9566790-2-4) Berlin, Germany, EUSPEN, May, 27-31, 2013.
wa1466 R. Pohl, C.W. Visser, G.B.R.E. Römer, C. Sun, A.J. Huis in 't Veld, D. Lohse, High-resolution imaging of ejection dynamics in laser-induced forward transfer, pp. 7 in Proceedings SPIE, Laser Applications in Microelectronic and Optoelectronic Manufacturing, (LAMOM) XIX, Vol. 8967, Ed. Yoshiki Nakata; Xianfan Xu; Stephan Roth; Beat Neuenschwander (ISSN 0277-786X) San Francisco, CA, USA, February, 4-6, 2014. DOI: doi:10.1117/12.2037231.
wa1467 M.A. Beijen, D. Tjepkema, J. van Dijk, Two-sensor control in active vibration isolation using hard mounts, Control Engineering Practice (ISSN 0967-0661) 26 pp. 82-90 (2014). DOI: 10.1016/j.conengprac.2013.12.015.
wa1469 G.R.B.E. Römer, R. Pohl, C.W. Visser, C. Sun, D. Lohse, A.J. Huis in 't Veld, High speed imaging of laser induced forward transfer effects of nano-to-pico-second pulses on metal donor ejection, pp. 2 in Proceedings of the 6th International Symposium on Flexible Organic Electronics (ISFOE13) (No ISBN or ISSN) Thessaloniki, Greece, July, 8-11, 2013.
wa1470 J. Vincenc Obona, J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, Pulse-analysis-pulse investigation of femtosecond laser-induced periodic surface structures on silicon in air, Optics Express (ISSN 1094-4087) 12 (8) pp. 9254-9261 (2014). DOI: http://dx.doi.org/10.1364/OE.22.009254.
wa1471 J. Vincenc Obona, V. Ocelik, J.C. Rao, J.Z.P. Skolski, G.B.R.E. Römer, A.J. Huis in 't Veld, J. Th. M. de Hosson, Modification of Cu surface with picosecond laser pulses, Applied Surface Science (ISSN 0169-4332) 303 pp. 118-124 (2014). Elsevier. DOI: http://dx.doi.org/10.1016/j.apsusc.2014.02.104.
wa1472 D. Scorticati, A. Illiberi, T. Bor, S.W.H. Eijt, H. Schut, G.R.B.E. Römer, D.F. de Lange, and A.J. Huis in t Veld, Annealing of SnO©üthin films by ultra-short laser pulses, Energy Express (ISSN 1094-4087) 22 (S3) pp. A607-A621 (2014). DOI: http://dx.doi.org/10.1364/OE.22.00A607.
wa1473 P.C. Verburg, G.R.B.E. Römer, A.J. Huis in 't Veld, Two-temprature model for pulsed-laser-induced subsurface modifications in Si, Applied Physics A (ISSN 0947-8396) 114 (4) pp. 1135-1143 (2014). DOI: 10.1007/s00339-013-7668-5.
wa1474 J.Z.P. Skolski, G.R.B.E. Römer, J. Vincenc Obona, A.J. Huis in 't Veld, Modeling laser-induced periodic surface structures: finite-difference time-domain feedback simulations, Journal of Applied Physics (ISSN 0021-8979) 115 (10) pp. 103102 (2014). DOI: http://dx.doi.org/10.1063/1.4867759.
wa1475 V. van der Wijk, Methodology for analysis and synthesis of inherently force and moment-balanced mechanisms - theory and applications -, 978-90-365-3630-1, University of Twente, April, 11, 2014. DOI: http://dx.doi.org/10.3990/1.9789036536301.
wa1476 J.Z.P. Skolski, Modeling laser-induced periodic surface structures - an electromagnetic approach -, 978-94-91909-07-8, University of Twente, April, 17, 2014. See also: http://purl.utwente.nl/publications/90486.
wa1477 L. van de Ridder, W.B.J. Hakvoort, J. van Dijk, Vibration isolation by compliant sensor mounting applied to a coriolis mass-flow meter, pp. 20174-1-20174-6 in Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis ESDA2014 (No ISBN or ISSN) Copenhagen, Denmark, ASME, June 25-27,, 2014. See also: http://purl.utwente.nl/publications/91292.
wa1478 M. Hoogerkamp, R.R. Waiboer, J. van Dijk, R.G.K.M. Aarts, Attenuation of disturbances introduced by dynamic links in precision motion systems using model-based observers, Mechatronics (ISSN 0957-4158) 24 (6) pp. 640–647 (2014). DISC. DOI: 10.1016/j.mechatronics.2014.04.006.
wa1479 R. Pohl, C.W. Visser, G.R.B.E. Römer, C. Sun, A.J. Huis in 't Veld, D. Lohse, Imaging of the ejection process of nanosecond laser-induced forward transfer of gold, pp. 129-134 in Proceedings of LPM2014 - the 15th International Symposium on Laser Precision Microfabrication (ISSN 0091-3286) Vilnius, Lithuania, June, 17-20, 2014.
wa1480 V. van der Wijk, Closed-chain principal vector linkages, pp. 829-837 in Proceedings of the 5th European Conference on Mechanism Science, Eucomes2014, Ed. P. Flores, F. Viadero (ISSN 2211-0984) Guimarães, Portugal, Springer International Publishing, September, 16-20, 2014. DOI: 10.1007/978-3-319-09411-3_87.
wa1481 Jianlei Tian, MiMo adaptive feed-forward controller design for motion control systems, University of Twente, Report no. wa1481, August, 22, 2014.
wa1482 G.R.B.E. Römer, Dictaat "Laser Material Processing" editie 2014-2015, vakcode 191137400, University of Twente, Enschede, the Netherlands, August, 2014.
wa1483 L. van de Ridder, W.B.J. Hakvoort, J. van Dijk, J.C. Lötters, A. de Boer, Quantification of the influence of external vibrations on the measurement error of a coriolis mass-flow meter, Flow Measurement and Instrumentation (ISSN 0955-5986&1873-6998) 40 pp. 39-49 (2014). DOI: 10.1016/j.flowmeasinst.2014.08.005.
wa1484 J.P. Meijaard, B. Krijnen, D.M. Brouwer, Deflection of a misaligned finger of a comb drive in an electrostatic field, Journal of Microelectromechanical Systems (ISSN 1057-7157&1941-0158) 23 (4) pp. 927-933 (2014). DOI: 10.1109/JMEMS.2014.2300233.
wa1485 B. Peerdeman, M. Valori, D.M. Brouwer, E. Hekman, S. Misra, S. Stramigioli, Underactuated hand prothesis, Mechanisms and Machine Theory (ISSN 0094-114X) 78 pp. 307-323 (2014). DOI: 10.1016/j.mechmachtheory.2014.03.18.
wa1486 B. Krijnen, D.M. Brouwer, Vacuum performance and control of a MEMS stage with integrated thermal position sensor, pp. 435-438 in Proceedings of the 14th EUSPEN International Conference (No ISBN or ISSN) Dubrovnik, Croatia, June, 2-6, 2014. Best Paper Award.
wa1487 B. Krijnen, D.M. Brouwer, Flexures for large stroke electrostatic actuation in MEMS, Journal of Micromechanics and Microengineering (ISSN 0960-1317&1361-6439) (2014). DOI: 10.1088/0960-1317/24/1/015006.
wa1488 D.J. Borgerink, J. Stegenga, D.M. Brouwer, H.J. Wörtche, S. Stramigioli, Rail-mounted robotic end-effector position error due to rail compliance and ship motion, pp. 3463-3468 in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (ISBN 978-1-4799-6933-3) Illinois, USA, September, 14-18, 2014.
wa1489 K. Staman, L. van de Ridder, D.M. Brouwer, J. van Dijk, W.B.J. Hakvoort, A high precision multi-DOF active vibration isolation setup for a coriolis mass flow rate meter, No pages in Proceedings of the 29th Annual Meeting of the American Society for Precision Engineering (ASPE) (No ISBN or ISSN) Boston, MA, USA, November, 9-14, 2014.
wa1490 D.M. Brouwer, Additive, control, energy, medical and other hot topics, Mikroniek (ISSN 0026-3699) pp. 18-21 (2014).
wa1491 J.B. Jonker, Second-Order Formulation for Three-Dimensional Beam Elements in Large DeflectionMultibody Dynamics Problems, pp. 10 in Proceedings of the 3rd Joint International Conference on Multibody System Dynamics The 7th Asian Conference on Multibody Dynamics (No ISBN or ISSN) BEXCO, Busan, Korea, June 30-July 3, 2014.
wa1492 O.A. Bauchau, GenyongWu, P. Betsch, A. Cardona, J. Gerstmayr, J.B. Jonker, P. Masarati, V. Sonneville, Validation of Flexible Multibody Dynamics Beam Formulations using Benchmark Problems, pp. 19 in Proceedings of the 3rd Joint International Conference on Multibody System Dynamics The 7th Asian Conference on Multibody Dynamics (No ISBN or ISSN) BEXCO, Busan, Korea, June 30-July 3, 2014.
wa1493 G.R.B.E. Römer, P. Bechtold, Electro-optic and Acousto-optic Laser Beam Scanners, Physics Procedia (ISSN 1875-3892) 56 pp. 29-39 (2014). DOI: 10.1016/j.phpro.2014.08.092.
wa1494 G.R.B.E. Römer, J.Z.P. Skolski, J. Vincenc Obona, A.J. Huis in 't Veld, Finite-difference Time-domain Modeling of Laser-induced Periodic Surface Structures, Physics Procedia (ISSN 1875-3892) 56 pp. 1325-1333 (2014). DOI: DOI: 10.1016/j.phpro.2014.08.058.
wa1495 W. Wijma, S.E. Boer, R.G.K.M. Aarts, D.M. Brouwer, W.B.J. Hakvoort, Modal Measurements and Model Corrections of A Large Stroke Compliant Mechanism, AME Special Issue (ISSN (Online) 2300-262X) 61 (2) pp. 347–366 (2014). DOI: 10.2478/meceng-2014-0020.
wa1496 K. Staman, A multi-dof active vibration isolation setup for a coriolis mass flow rate meter, University of Twente, Report no. wa1496, October, 16, 2014.
wa1497 B. Krijnen, A Large-stroke planar MEMS-based stage with integrated feedback, 978-90-365-3730-8, University of Twente, September, 26, 2014.
wa1498 G.R.B.E. Römer, Selected chapters from lectures notes on laser material processing for the course: 3D printing - processes and use Vakcode 201400103, University of Twente, Enschede, the Netherslands, September, 2014.
wa1499 J.Z.P. Skolski, G.R.B.E. Römer, J. Vincenc Obona, A.J. Huis in 't Veld, J.T.M. de Hosson, Including inter-pulse feedback mechanisms to model laser-induced periodic surface structure formation, Physics Review Letters (No ISSN) pp. 075320 (2012). DOI: http://dx.doi.org/10.1103/PhysRevB.85.075320.
wa1500 D. Arnaldo del Cerro, Picosecond pulsed laser microstructuring of metals for microfluidics, 978-90-365-3726-1, University of Twente, October, 2, 2014.
wa1501 M.H.W. Ruesink, Partial dynamic balancing of a 4-DOF parallel manipulator, University of Twente, Report no. wa1501, October, 28, 2014.
wa1502 L. van de Ridder, M.A. Beijen, W.B.J. Hakvoort, J. van Dijk, J.C. Lötters, A. de Boer, Active vibration isolation feedback control for Coriolis Mass-Flow Meters, Control Engineering Practice (ISSN 0967-0661&1873-6939) 33 pp. 76-83 (2014). DOI: 10.1016/j.conengprac.2014.09.007.
wa1503 J. van Dijk, Dictaat "System and Control Design 2" editie 2014-2015, vakcode 191131161, University of Twente, Enschede, the Netherslands, October, 22, 2014. DISC.
wa1504 V. Ocelík, J. Vincenc Obòna, J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, J.Th.M. de Hosson, Microstructural characterization of surface damage through ultra-short laser pulses, pp. M704 in Proceedings of the 2014 ICALEO, 33rd International Congress on Applications of Lasers & Electro-Optics, Ed. LIA (ISBN 9781940168029) San Diego, CA, USA, October, 19-23, 2014. paper number M704.
wa1505 K.L.J. Stroeken, Floor vibration isolation of a coriolis mass-flow meter using filtering techniques, University of Twente, Report no. wa1505, November, 21, 2014. (vertrouwelijk).
wa1506 M.A. Beijen, J. van Dijk, W.B.J. Hakvoort, M.F. Heertjes, Self-tuning feedforward control for active vibration isolation of precision machines, pp. 5611-5616 in Proceedings of the 19th International Federation of Automatic Control World Congress, Ed. Edward Boje, Xiaohua Xia (ISBN 978-3-902823-62-5, ISSN 1474-6670) Cape Town, South Africa, IFAC, August, 24-29, 2014. DOI: 10.3182/20140824-6-ZA-1003.01208.
wa1507 M. Jansink, Solid-phase laser induced forward transfer of variable shapes using a liquid crystal spatial light modulator, University of Twente, Report no. wa1507, December, 18, 2014.
wa1508 D.M. Brouwer, Dictaat "Basic Design Principles for Precision", editie 2014-2015, vakcode ...., TOM, module 7, University of Twente, Enschede, the Netherslands, November, 2014.
wa1509 M.E. Grootens, Synthesis and Optimizationof large stroke flexures Hinges, University of Twente, Report no. wa1509, December, 19, 2014.
wa1510 M.M. Arnolli, N.C. Hanumara, M. Franken, D.M. Brouwer, I.A.M.J. Broeders, An overview of systems for CT- and MRI-guided percutaneous needle placement in the thorax and abdomen, The International Journal of Medical Robotics and Computer Assisted Surgery (ISSN 1478-5951&1478-496X) 11 (4) pp. 458-475 (2014). See also: http://purl.utwente.nl/publications/94238. , DOI: 10.1002/rcs.1630.
wa1511 J. Groenesteijn, L. van de Ridder, J.C. Lötters, R.J. Wiegerink, Modelling of a micro coriolis mass flow sensor for sensitivity improvements, pp. 954-957 in Proceedings of the Thirteenth IEEE Sensors Coference 2014 (ISBN 978-1-4799-0162-3) Valencia, Spain, November, 2-5, 2014. See also: http://eprints.eemcs.utwente.nl/24184.
wa1512 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer, A.J. Huis in ‘t Veld, In-plane laser forming for high precision alignment, Optical Engineering (ISSN 0091-3286) 53 (12) pp. 126105 (2014). DOI: http://dx.doi.org/10.1117/1.OE.53.12.126105.
wa1513 V. van der Wijk, Eliminating shaking forces and moments, Mikroniek (ISSN 0026-3699) 54 (2) pp. 18-25 (2014).
wa1514 P.C. Verburg, G.R.B.E. Römer, A.J. Huis in 't Veld, Two-photon-induced internal modification of silicon by erbium-doped fiber laser, Optics express (ISSN 1094-4087) 22 (18) pp. 21958-21971 (2014). DOI: 10.1364/OE.22.021958.
wa1515 G.R.B.E. Römer, Dictaat "Design and Control of Mechatronic Systems", editie 2014-2015, vakcode: ...., deel I, University of Twente, Enschede, the Netherslands, December, 2014.
wa1516 J.L. Herder, Internationalisation made to measure, Mikroniek (ISSN 0026-3699) 54 (4) pp. 4 (2014). editorial.
wa1517 J.P. Khatait, R.G.K.M. Aarts, D.M. Brouwer, J.L. Herder, Effect of combined motion on force transmission of a flexible instrument, No pages in Proceedings of the ASME 2014 International Mechanical Engineering Congres & Exposition, Ed. ASME (No ISBN or ISSN) Montreal, Canada, November, 14-20, 2014.
wa1518 Wei Ya, A.R. Konuk, R.G.K.M. Aarts, B. Pathiraj, A.J. Huis in 't Veld, Spectroscopic Monitoring of Metallic Bonding in Laser Metal Deposition, Journal of Materials Processing Technology (No ISSN) 220 pp. 276-284 (2015). DOI: doi:10.1016/j.jmatprotec.2015.01.026.
wa1519 R.G.K.M. Aarts, G.R.B.E. Römer, K. van Keulen, Werkcollege: opgaven en practica, "Systeemanalyse", editie 2014-2015, vakcode ...., University of Twente, Enschede, the Netherslands, February, 2015.
wa1520 Yoeko Mak, Realization of mini segway robot using NI MyRIO, University of Twente, Report no. wa1520, February, 2015.
wa1521 R. Pohl, C.W. Visser, G.R.B.E. Römer, D. Lohse, C.Sun, A.J. Huis in ’t Veld, Ejection Regimes in Picosecond Laser-Induced Forward Transfer of Metals, Physical Review Applied (ISSN 2331-7019 (online) 3 (2) pp. 024001 (2015). DOI: http://dx.doi.org/10.1103/PhysRevApplied.3.024001.
wa1522 J.A.J. Huttenhuis, Kinematic design method for a rail mounted inspection robot arm, University of Twente, Report no. wa1522, March, 2015.
wa1523 R.G.K.M. Aarts, J. van Dijk, Dictaat "Design and Control of mechatronic Systems", editie 2014/2015, vakcode ...., deel II, University of Twente, Enschede, the Netherslands, April, 2015.
wa1524 M. Nijenhuis, Analytical formulation for stiffness and buckling characteristics of flexure mechanisms, University of Twente, Report no. wa1524, May, 2015.
wa1525 W. van de Sande, Limits of deterministic behaviour of a multiple overconstrained compliant four-bar mechanism, University of Twente, Report no. wa1525, May, 2015.
wa1526 R. Slomp, Vibration avoidance in cable-driven parallel manipulator in outside environments, University of Twente, Report no. wa1526, May, 2015.
wa1527 L. van de Ridder, W.B.J. Hakvoort, J. van Dijk, Active vibration isolation control: comparison of feedback and feedforward control strategies applied to coriolis mass-flow-meters, pp. 2173-2178 in Proceedings of the American Control Conference 2015, ACC 2015 (ISBN 978-1-4799-8686-6, ISSN 0743-1619) Chicago, IL, USA, July, 1-3, 2015.
wa1528 P.C. Verburg, L. Smilie, G.R.B.E. Römer, J. Bradby, J. Williams, A.J. Huis in 't Veld, Crystal structure of laser-induced subsurface modifications in Si, Applied Physics A (ISSN 0947-8396) pp. 9 (2015). DOI: 10.1007/s00339-015-9238-5.
wa1529 R. Pohl, M. Jansink, G.B.R.E. Römer, A.J. Huis in 't Veld, Solid-phase laser-induced forward transfer of variable shapes using a liquit-crystal spatial light modulator, Applied Physisc A (ISSN 0947-8396) (2015). DOI: 10.1007/s00339-015-9212-2.
wa1530 R. Pohl, C.W. Visser, G.R.B.E. Römer, C.Sun, A.J. Huis in ’t Veld, D. Lohse, Imaging of the ejection process of nanosecond laser-induced forward transfer of gold, JLMN Journal of Laser Micro/Nanoengineering (No ISSN) 10 (2) (2015).
wa1531 P.C. Verburg, Laser-induced subsurface modification of silicon wafers, 978-90-365-3838-1, University of Twente, March, 13, 2015.
wa1532 R. Menning, Lifetime testing of linear electro magnetic actuators, incl. design and realization of a test setup, University of Twente, Report no. wa1532, Janury, 2015.
wa1533 L. Kamphuis, Singularity analysis and design of an H4 manipulator end effector, University of Twente, Report no. wa1533, June, 30, 2015.
wa1534 L. van de Ridder, Vibration Isolation for Coriolis Mass-Flow Meters, 978-90-365-3874-9, University of Twente, June, 24, 2015.
wa1535 D. Scorticati, Thermal processing of thin film using ultra-short laser pulses - Applied to photovoltaic materials, 978-90-365-3900-5, University of Twente, June, 25, 2015.
wa1536 J. Eichstädt, The spatial emergence of laser-induced periodic surface structures under lateral displacement irradiation conditions, 978-90-365-3912-8, University of Twente, July, 10, 2015.
wa1537 J.C. Lötters, M.R. Katerberg, W.B.J. Hakvoort, W.D. Kruijswijk, L. van de Ridder, Coriolis flowsensor, BERKIN B.V., PCT/NL2014/050799, WO2015/076676 A1, G01F 1/84 (2006.01), F16F 15/00 (2006.01), May, 28, 2015.
wa1538 C.W. Visser, R. Pohl, C. Sun, G.R.B.E. Römer, A.J. Huis in ‘t Veld ,, Toward 3D Printing of Pure Metals by Laser-Induced Forward Transfer, Advanced Materials (ISSN 1521-4095) 27 (27) pp. 4087-4092 (2015). DOI: 10.1002/adma.201501058.
wa1539 E. Schipper, Design of a 3 DOF flexure based precision stage, University of Twente, Report no. wa1539, July, 17, 2015.
wa1540 S. Chen, The design of a large stroke axially stiff flexure hinge, University of Twente, Report no. wa1540, August, 25, 2015.
wa1541 S.E. Boer, R.G.K.M. Aarts, J.P. Meijaard, D.M. Brouwer, J.B. Jonker, A nonlinear two-node superelement with deformable-interface surfaces for use in flexible multibody systems, Multibody System Dynamics (ISSN 1384-5640) 34 (1) pp. 53-79 (2015). DOI: 10.1007/s11044-014-9414-y.
wa1542 C. van Keulen, Risk inventory and evaluation (RIE) helicopter model, Report no. wa1542, August, 14, 2015.
wa1543 G.R.B.E. Römer, Dictaat "Design & Control Mechatronic Systems", editie 2015-2016, vakcode ....., deel I, University of Twente, Enschede, the Netherslands, Augustus, 2015.
wa1544 M. Nijenhuis, J.P. Meijaard, J.L. Herder, Sh. Awtar, D.M. Brouwer, An analytical formulation for the lateral support stiffness of a spatial flexure strip, pp. 11 in Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2015 (No ISBN or ISSN) Boston, MA, USA, August, 2-5, 2015.
wa1545 Wim Hendrikson, Wendy Masman-Bakker, Bas van Bochove, Johann Skolski, Justus Eichstädt, Bart Koopman, Clemens van Blitterswijk, Dirk Grijpma, Gert-willem Römer, Lorenzo Moroni, Jeroen Rouwkema, Mold-Based Application of Laser-Induced Periodic Surface Structures (LIPSS) on Biomaterials for Nanoscale Patterning, Macromolecular Bioscience (ISSN 1616-5195) 16 (1) pp. 43-49 (2016). See also: http://purl.utwente.nl/publications/100114. , DOI: 10.1002/mabi.201500270.
wa1546 A.J. Oude Vrielink, Inventory of load metrics and presentation of a motion optimization method with application to optimal balancing, University of Twente, Report no. wa1546, October, 13, 2015.
wa1547 M. Naves, Multibody-based topology synthesis method for large stroke flexure hinges, University of Twente, Report no. wa1547, November, 12, 2015.
wa1548 G.R.B.E. Römer, Dictaat "Laser Material Processing" editie 2015-2016, vakcode: 191137400, University of Twente, Enschede, the Netherslands, November, 2015.
wa1549 T.J. Lassche, The design of a compliant microgripper for the handling of fibers and wires in industrial high-precision assembly lines, University of Twente, Report no. wa1549, December, 01, 2015.
wa1550 J.P. Khatait, D.M. Brouwer, R.G.K.M. Aarts, J.L. Herder, Improved force transmission of a flexible surgical instrument by combining input motion, Journal of Medical Devices (ISSN 1932-6181) 9 (1) pp. 011009 (11 pages) (2015). DOI: 10.1115/1.4029418.
wa1551 D. Scorticati, G.R.B.E. Römer, A.J. Huis in 't Veld, D.F. de Lange, Modeling of Temperature Cycles Induced by Picoand Nanosecond Laser Pulses in Zinc Oxide and Molybdenum Thin Films, Journal of Heat Transfer (No ISSN) 138 pp. 031301-1 031301-9 (2015). DOI: 10.1115/1.4031733.
wa1552 Wei Ya, Laser Materials Interactions during Cladding - analyses on clad formation, thermal cycles, residual stress and defects, 978-94-91909-31-3, University of Twente, October, 30, 2015. M2i.
wa1553 R. Pohl, Laser-induced forward transfer of pure metals - towards 3D printing, 978-90-365-3869-5, University of Twente, September, 16, 2015.
wa1554 J.J. de Jong, J.L. Herder, A comparison between five principle strategies for adapting shaking force balance during varying payload, pp. 446-454 in The 14th IFToMM World Congress (No ISBN or ISSN) Taipei, Taiwan, October 25-30, 2015. DOI: 10.6567/IFToMM.14TH.WC.OS2.043.
wa1555 D. Scorticati , A. Illiberi, T.C. Bor, S.W.H. Eijt, H. Schut, G.R.B.E. Römer, M. Klein Gunnewiek, A.T.M. Lenferink, B.J. Kniknie, R. Mary Joy, M.S. Dorenkamper, D.F. de Lang, C. Otto, D. Borsa, W.J. Soppe, A.J. Huis in ’t Veld, Thermal annealing using ultra-short laser pulses to improve the electrical properties of Al:ZnO thin films, Acta Materialia (No ISSN) 98 pp. 327-335 (2015). DOI: doi:10.1016/j.actamat.2015.07.047.
wa1556 B.Krijnen, K.R. Swinkels, D.M. Brouwer, L. Abelmann, J.L. Herder, A large-stroke 3DOF stage with integrated feedback in MEMS, Microelectronical Systems (ISSN 1057-7157) PP (99) pp. 10 (2015). DOI: 10.1109/JMEMS.2015.2432054.
wa1557 S. Darshan, T.J. Lassche, J.L. Herder, G.K. Ananthasuresh, A compliant two-port bistable mechanism with application to easy-chair design, pp. 227-236 in Proceedings of the 14th World Congress in Mechanism and Machine Science (No ISBN or ISSN) Taipei, Taiwan, International Federation for the Promotion of Mechanism and Machine Science, IFToMM, October 25-30, 2015. Best Application Paper Award. DOI: 10.6567/IFToMM.14TH.WC.OS8.008.
wa1558 B.Krijnen, D.M. Brouwer, L. Abelmann, J.L. Herder, Vacuum behavior and control of a MEMS stage with integrated thermal displacement sensor, Sensors & Actuators: A. Physical (No ISSN) 234 pp. 321-330 (2015). DOI: 10.1016/j.sna.2015.09.005.
wa1559 A.J. Lamers, J.A. Gallego Sanchez, J.L. Herder, Design of a statically balanced fully compliant grasper, Mechanisms and Machine Theory (No ISSN) 92 pp. 230-239 (2015). DOI: 10.1016/j.mechmachtheory.2015.05.014.
wa1560 W.W.P.J. van de Sande, R.G.K.M. Aarts, D.M. Brouwer, System behavior of a multiple overconstrained four-bar-mechanism, No pages in Proceedings of the 30th Annual Meeting of the American Society for Precision Engineering (ASPE) (No ISBN or ISSN) Austin, TX, USA, November, 1-6, 2015.
wa1561 K.G.P. Folkersma, Laser forming for sub-micron adjustment - With application to optical fiber assembly, 978-90-365-4018-6, University of Twente, December, 15, 2015.
wa1562 M.S. Groen, J. Groenesteijn, E. Meutstege, R.A. Brookhuis, D.M. Brouwer, J.C. Lötters, R.J. Wiegerink, Proportional Control Valves Integrated in Silicon Nitride Surface Channel Technology, Journal of Microelectomechanical Systems (ISSN 1057-7157) 24 (6) pp. 1759-1767 (2015). DOI: http://dx.doi.org/10.1109/JMEMS.2015.2436402.
wa1563 Wei Ya, B. Pathiraj, Shaojie Liu, 2D modelling of clad geometry and resulting thermal cycles during laser cladding, Journal of Materials Processing Technology (ISSN 0924-0136) 230 pp. 217-232 (2016). DOI: doi:10.1016/j.jmatprotec.2015.11.012.
wa1564 Otte Haitsma, A flexure-based 6 DOF parallel manipulator for fast adaptive optics, University of Twente, Report no. wa1564, January, 19, 2016.
wa1565 L. van de Ridder, W.B.J. Hakvoort, J. van Dijk, J.C. Lötters, A. de Boer, Vibration isolation by an actively compliantly mounted sensor applied to a coriolis mass-flow meter, Journal of Dynamic Systems, Measurement and Control (ISSN 0022-0434) 138 (3) pp. 031005 (8 pages) (2016). DOI: 10.1115/1.4032290.
wa1566 Bart Hoorweg, Morphological computation for a robot cheetah focussing on the role of the spine, University of Twente, Report no. wa1566, February, 5, 2016.
wa1567 Daniel Tan, A modular design methodology for multi-DOF variable stiffness joints, University of Twente, Report no. wa1567, February, 19, 2016.
wa1568 Verena Louter, The development of a dynamic model of a one stand cold mill, University of Twente, Report no. wa1568, 2016.
wa1569 O.A. Bauchau, P. Betsch, A. Cardona, J. Gerstmayr, J.B. Jonker, P. Masarati, V. Sonneville, Validation of flexible multibody dynamics beam formulations using benchmark problems, pp. 1619-1630 in Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015, Ed. J.M. Font-Llagunes (ISBN 978-84-944244-0-3) Barcelona, Spain, June, 29 - July, 02, 2015.
wa1570 Diederik van Lith, Performance evaluation and calibration of a 7-DOF redundantly actuated parallel haptic device, University of Twente, Report no. wa1570, May, 24, 2016.
wa1571 Erwin Versteeg, Requirements analysis of 7-DOF parallel haptic master device and experimental comparison of two workspace extension techniques for teleoperation in a real life task, University of Twente, Report no. wa1571, May, 24, 2016.
wa1574 L. van de Ridder, W.B.J. Hakvoort, D.M. Brouwer, J. van Dijk, J.C. Lötters, A. de Boer, Coriolis mass-flow meter with integrated multi-DOF active vibration isolation, Mechatronics (ISSN 0957-4158) 36 pp. 167-179 (2016). DOI: 10.1016/j.mechatronics.2016.03.003.
wa1575 S.D. Bijl, The redesign of a linear actuator towards costs, Report no. wa1575, July, 14, 2016. vertrouwelijk.
wa1576 W.B.J. Hakvoort, L. van de Ridder, J. van Dijk, D.M. Brouwer, Multiaxis vibration isolation for a coriolis mass flow meter, pp. 35-40 in Proceedings of the 5th American Society for Precision Engineering (ASPE) Topical Meeting on Precision Mechatronic System Design and control (ISBN 978-1-887706-70-4) Cambridge, Massachusetts, USA, ASPE, April, 20-22, 2016.
wa1577 Stefan Rutjes, Improving performance of a microlens optical wafer stacker, University of Twente, Report no. wa1577, June, 21, 2016. vertrouwelijk.
wa1578 G.R.B.E. Römer, Dictaat "Design & Control of Mechatonic Systems", editie 2016-2017, part 1, University of Twente, Enschede, the Netherslands, August, 2016.
wa1579 Axel Timmer Arends, Kinematic calibration of a six DOF flexure-based parallel manipulator, University of Twente, Report no. wa1579, August, 26, 2016.
wa1580 W.B.J. Hakvoort, Dictaat "", editie 2016-2017, University of Twente, Enschede, the Netherslands, August, 2016.
wa1581 R.G.K.M. Aarts, G.R.B.E. Römer, C. van Keulen, Werkcollege: "Opgaven en practica systeemanalyse", editie 2016-2017, University of Twente, Enschede, the Netherslands, August, 2016.
wa1582 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer, Microtube laser forming for precision component alignment, ASME Journal of Manufacturing Science and Engineering (ISSN 1087-1357) 138 (8) pp. 081012-1-081012-6 (2016). DOI: 10.1115/1.4033389.
wa1583 Rudi Damhuis, Automated store loader for bulk storage, University of Twente, Report no. wa1583, August, 29, 2016.
wa1584 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer. J.L. Herder, Robust precision alignment algorithm for micro tube laser forming, Precision Engineering (ISSN 0141-6359) 46 pp. 301-308 (2016). DOI: 10.1016/j.precisioneng.2016.05.011.
wa1585 J.J. de Jong, J. van Dijk, J.L. Herder, A screw-based dynamic balancing approach, applied to a 5-bar mechanism, pp. 31-38 in Proceedings of the 15th Conference Advances in Robot Kinematics, Ed. IFToMM (No ISBN or ISSN) Grasse, France, June, 27-30, 2016. See also: http://purl.utwente.nl/publications/101105.
wa1586 J.J. de Jong, J. van Dijk, J.L. Herder, On the dynamic equivalence of planar mechanisms, an inertia decomposition method, pp. 51-59 in New trends in Mechanism and Machine Science: Theory and Industrial Applications, Ed. Philippe Wenger, Paulo Flores (ISBN 9783319441559) Nantes, France, Springer, September, 20-23, 2016. DOI: 10.1007/978-3-319-44156-6_6.
wa1587 G.R.B.E. Römer, Dictaat "Laser material processing", editie 2016-2017, vakcode 191137400, University of Twente, Enschede, the Netherslands, September, 2016.
wa1588 Vinayak Kalas, Shaking force balance in parallel manipulators with flexible links, University of Twente, Report no. wa1588, December, 20, 2016.
wa1589 Sjors Kemp, Design of a wafer positioning module, University of Twente, Report no. wa1589, December, 09, 2016.
wa1590 M. Naves, D.M. Brouwer, R.G.K.M. Aarts, Multibody-based topology synthesis method for large stroke flexure hinges, pp. V05AT07A009 (8 pages) in ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC2016, Ed. ASME (ISBN 978-0-7918-5015-2) Charlotte, NC, USA, August, 21-24, 2016. Best Presentation Award. DOI: 10.1115/DETC2016-59287.
wa1591 M. Nijenhuis, SPACAR-a brief introduction, Twente-Delft Symposium, Delft, the Netherlands, July, 5, 2016.
wa1592 M. Nijenhuis, Nonlinear analysis of flexure mechanisms-Beam contraint model, Compliant Mechanisms Summer School, Charlotte, NC, USA, August, 20, 2016.
wa1593 D.M. Brouwer, P.C.J. van Rens, M. Nijenhuis, Design principles for precision mechanisms 1, No pages in Proceedings of the 31st ASPE Annual Meeting 2016 (No ISBN or ISSN) Portland, OR, USA, October, 24, 2016.
wa1594 M. Nijenhuis, D.M. Brouwer, Stiffness Consequences of Misalignments in an Overconstrained Flexure Design, ASPE16, 31st Annual Meeting, Portland, OR, USA, October, 23-28, 2016.
wa1595 M. Nijenhuis, D.M. Brouwer, A Closed-Form Model for the Support Stiffness of Spatial Flexure Strips With Limited Twist, pp. V05AT07A027 (10 pages) in ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC2016, Ed. ASME (ISBN 978-0-7918-5015-2) Charlotte, NC, USA, August, 21-24, 2016. DOI: 10.1115/DETC2016-59979.
wa1596 D.M. Brouwer, S.J. Ludwick, Trends in control techniques for precision mechatronic systems, No pages in 31st ASPE Annual Meeting, Ed. ASPE (No ISBN or ISSN) Portland, OR, USA, October, 23-28, 2016.
wa1597 Jun Luo, R. Pohl, Lehua Qi, G.R.B.E. Römer, Chao Sun, D. Lohse, C.W. Visser, Printing functional 3D microdevices by laser-induced forward transfer, Small (ISSN 1613-6829) pp. 1602553 (5 pages) (2016). See also: http://purl.utwente.nl/publications/102470. , DOI: 10.1002/smll.201602553.
wa1598 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer. J.L. Herder, High precision optical fiber alignment using tube laser bending, The International Journal of Advanced Manufacturing Technology (ISSN 1433-3015) 86 (1) pp. 953-961 (2016). DOI: 10.1007/s00170-015-8143-6.
wa1599 S.E. Boer, R.G.K.M. Aarts, D.M. Brouwer, J.B. Jonker, Reduced order analysis and simulation of a large-stroke compliant mechanism, pp. 2 in Proceedings of the 4th Joint International Conference on Multibody System Dynamics, Ed. Jozsef Kövecses & John McPhee (ISBN 979-0-9682827-9-3) Montreal, Québec, Canada, May, 26-June, 02, 2016.
wa1600 M. Grootens, R.G.K.M. Aarts, D.M. Brouwer, Synthesis and optimisation of large stroke flexure hinges, pp. 463-471 in New trends in Mechanism and Machine Science: Theory and Industrial Applications, Ed. Philippe Wenger, Paulo Flores (ISBN 9783319441559) Nantes, France, Springer, September, 20-23, 2016. DOI: 10.1007/978-3-319-44156-6_47.
wap19990301 S. Postma, Laser Welding Modeling and Control - A literature review, Report no. wap19990301, March, 1999. EM, NIMR publication.
wap19990831 J. van Dijk, Hinf control of piezo actuated tilting mirror mechanism, No pages in European Control Conference ECC'99 (No ISBN or ISSN) Karlsruhe, Germany, August 31 - September 3, 1999. DISC.
wap19990901 Erwin Schrijver and Johannes van Dijk, Hinf design of disturbance compensators for cogging forces in a linear permanent magnet motor, Journal A (ISSN 0771-1107) 40 (4) pp. 36-41 (1999). DISC.
wap200000601 J. Olde Benneker, S. Postma, I.A. Kerp, Ontwikkelingen in laserbewerkingen, MB dossier (ISSN 0169-2259) 66 (6) pp. 12-29 (2000).
wap20000316a Johan Meijer, Licht werk, Universiteit Twente, March 16, 2000.
wap20000918a M.P. Koster, M.A.M. Grooten, M. de Jong, Elastoslider, pp. 385-391 in IFAC Conference on Mechatronic Systems, Ed. R. Iserman (No ISBN or ISSN) Darmstadt, Germany, September 18-20, 2000.
wap20001105a M.P. Koster, Flexural Joints in Mechanisms, pp. 855-859 in IMECE '00 ASME International Mechanical Engineering Congress and Exposition (ISBN 0-7918-1931-0) Orlando, Florida, USA, November 5-10, 2000.
wap20001105b M.P. Koster, Piezo Driven Mechanisms with Fexural Joints, pp. 879-881 in IMECE '00 ASME International Mechanical Engineering Congress and Exposition (ISBN 0-7918-1931-0) Orlando, Florida, USA, November 5-10, 2000.
wap20001109a R.G.K.M. Aarts, Penetratiedetectie bij laserlassen, Bond voor Materialenkennis, Rijksuniversiteit Groningen, November 9, 2000.
wap20001109b G.R.B.E. Römer, Naadvolgen bij gerobotiseerd laserlassen, Bond voor Materialenkennis, Rijksuniversiteit Groningen, November 9, 2000.
wap20001120a R.R. Waiboer, Efficient dynamic simulation of flexible link manipulators for robotized laser welding, Third Engineering Mechanics Symposium, Rulduc, Kerkrade, November 20, 2000.
wap20001214a S. Postma, Penetration detection in Nd:YAG laser welding of sheet metal, NIMR congress, Noordwijkerhout, December 14, 2000.
wap20001214b R.R. Waiboer, Off-line programming software for robotized laser welding, NIMR congress, Noordwijkerhout, December 14, 2000.
wap20010419a R.G.K.M. Aarts, Laserlassen met het gebruik van sensoren / Gerobotiseerd laserlassen, Federatie Dunne Plaat, Universiteit Twente, April 19, 2001. EM, NIMR.
wap20010919a Sjoerd Postma, Monitoren en feedback controle bij het laserlassen, Bond voor Materialenkennis, Elektrum, Arnhem, September 19, 2001. EM, NIMR.
wap20011118a S. Postma, R.G.K.M. Aarts, J. Meijer, J.B. Jonker and W.M. Zweers, Penetration Control in Laser Welding of Sheet Metal using Optical sensors, Engineering Mechanics Symposium (poster), Rulduc, Kerkrade (NL), November 18, 2001. EM, NIMR.
wap20011118b R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Robot identification for dynamic simulation, Engineering Mechanics Symposium (poster), Rulduc, Kerkrade (NL), November 18, 2001. EM, NIMR.
wap20011118c H. Super, J. van Dijk and J.B. Jonker, Hybrid isolation of structure borne sound, Engineering Mechanics Symposium (poster), Rulduc, Kerkrade (NL), November 18, 2001. EM.
wap20011119a H. Nijmeijer (TU/e), P.Th.L.M. van Woerkom (TUD), R.G.K.M. Aarts (UT), Session 3: Dynamics and Control, Engineering Mechanics Symposium, Rulduc, Kerkrade (NL), November 19, 2001. EM, NIMR.
wap20011119b R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Robot identification for dynamic simulation, Engineering Mechanics Symposium, Rulduc, Kerkrade (NL), November 19, 2001. EM, NIMR.
wap20011210a R.R. Waiboer, Robot identification for dynamic simulation of robotised laser welding, NIMR Congress (poster), Noordwijkerhout (NL), December 10-11, 2001. EM, NIMR.
wap20011210b S. Postma, Penetration feedback control in laser welding, NIMR Congress (poster), Noordwijkerhout (NL), December 10-11, 2001. EM, NIMR.
wap20011214 Dennis Alexander Schipper, Mobile Autonomous Robot Twente, a mechatronics design approach, 90-365-1686-2, University of Twente, December 14, 2001.
wap20020130a Erwin Schrijver, Robot tracking for laser welding, Contactgroep Mechatronica, University of Twente, January 30, 2002. DISC.
wap20020130b Gert-Willem Romer, Seam tracking for robot laser welding, Contactgroep Mechatronica, University of Twente, January 30, 2002. DISC.
wap20020130c Ronald Aarts, Robot identification for dynamic simulation, Contactgroep Mechatronica, University of Twente, January 30, 2002. DISC.
wap20020222 Roelof Frederik de Graaf, Laser cutting of hybrid laminates, 90-365-1703-6, University of Twente, February 22, 2002. IPV.
wap20020226a J. Meijer, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Toepassingen van lasers in de productie., Voorlichtingsdag Hoogvermogen Lasers, Arnhem, February, 26, 2002. IPV, EM.
wap20020226b J. Olde Benneker, A.P.M. Jansen*, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Laserlassen, Voorlichtingsdag Hoogvermogen Lasers, Arnhem, February, 26, 2002. NIMR, * Inalfa Metal Products.
wap20020226c G.R.B.E. Römer, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Hoogvermogen lasers bij het bewerken van metalen., Voorlichtingsdag Hoogvermogen Lasers, Arnhem, February, 26, 2002. IPV.
wap20020405 Erwin Schrijver, Improved Robot Tracking Control for Laser Welding, Disturbance Estimation and Compensation, 90-365-1730-3, University of Twente, April, 5, 2002. Drebbel, NIMR.
wap20020514a J. Meijer, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Kennis, ervaring, expertiese met hoogvermogen lasers in Nederland, Regionale bijeenkomsten, Leeuwarden, May, 14, 2002. IPV, EM.
wap20020514b J. Olde Benneker, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Laserbewerkingen: praktijkvoorbeelden., Regionale bijeenkomsten, Leeuwarden, May, 14, 2002. NIMR.
wap20020516 J. Meijer, Sensoren voor ondersteuning van laserprocessen., Federatie Dunne Plaat, University of Twente, May, 16, 2002. IPV, EM.
wap20020527 I.A. Kerp, G.R.B.E. Römer, J. Meijer, Lasercladding of 3D surfaces, Materialresearch 2002, Veldhoven, May, 27-28, 2002. IPV.
wap20020528 J. Olde Benneker, R. Pieters*, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Laserbewerkingen: praktijkvoorbeelden., Stichting NIMR, Delft, May, 28, 2002. NIMR, * Stichting NIMR.
wap20020619 J. Meijer, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Snijden, lassen, oppervlaktebewerkingen, Syntens, University of Twente, June, 19, 2002. IPV, EM.
wap20020619b J. Olde Benneker, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Praktijkvoorbeelden van laserbewerkte producten, Syntens, University of Twente, June, 19, 2002. NIMR.
wap20020819 J. Meijer, K. Du, D. Hoffmann, V.S. Kovalenko, T. Masuzawa, A. Ostendorf, R. Poprawe, W. Schulz, Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons, General Assembly CIRP, San Sebastian, Spain, August, 19, 2002. IPV, EM.
wap20020905 J. Meijer, Themadag Lasers: doorbraak in metaalbewerking; Overzicht laserbewerkingen, Mikrocentrum Eindhoven, Mol, Belgium, September, 05, 2002. IPV, EM.
wap20020925 J. Olde Benneker, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Workshop laserlassen., Hoekloos B.V., Schiedam, September, 25, 2002. NIMR.
wap20021101 J. Meijer, Laser Machining in the Century of the Photons, Keio University, Yokohama, Japan, November, 01, 2002. IPV, EM.
wap20021104 J.B. Jonker and R.G.K.M. Aarts, Multibody Dynamics - Part B: Dynamics of Flexible Multibody Systems, Engineering Mechanics graduate course, University of Twente, November 4-6, 2002. EM.
wap20021114a J. Meijer, Laser Machining - State of the art and new options in the "age of the photons", Research School on Integrated Manufacturing, University of Twente, 4-15 November, 2002. IPV.
wap20021114b S. Postma, Monitoring and Control in Laser Welding, Research School on Integrated Manufacturing, University of Twente, 4-15 November, 2002. EM, NIMR.
wap20021114c D.F. de Lange, Unsteady meltpool and keyhole modelling for laser welding, Research School on Integrated Manufacturing, University of Twente, 4-15 November, 2002. NIMR.
wap20021114d B. Pathiraj, Laser Welding of Aluminium to Steel, Research School on Integrated Manufacturing, University of Twente, 4-15 November, 2002.
wap20021118a S. Turteltaub (TUD), J. van Dijk (UT), N. van de Wouw (TU/e), Workshop 2: Dynamics, Control and Optimization, Engineering Mechanics Symposium, Rulduc, Kerkrade (NL), November 18, 2002. EM.
wap20021118b G.Nijsse, H.Super, J.Van Dijk and J.B.Jonker, Real Time Control of a Six-Degree-of-Freedom Vibration Isolation Setup, Engineering Mechanics Symposium, Rulduc, Kerkrade (NL), November 18, 2002. EM.
wap20021118c H. Super, J. van Dijk and J.B. Jonker, Hybrid Isolation of Structure Borne Sound - Experiments on vibration isolation, Engineering Mechanics Symposium (poster), Rulduc, Kerkrade (NL), November 18, 2002. EM.
wap20021118d R.R. Waiboer, W. Holterman, R.G.K.M. Aarts and J.B. Jonker, Realistic Robot Simulation, Engineering Mechanics Symposium (poster), Rulduc, Kerkrade (NL), November 18, 2002. EM, NIMR.
wap20021128 J. Olde Benneker, Pionierproject: toepassing van hoogvermogen lasers bij het bewerken van metalen. Workshop laserlassen., Syntens, University of Twente, November, 28, 2002. NIMR.
wap20021216a D.F. de Lange, Unsteady meltpool & keyhole modelling for laser welding, NIMR Congress (poster), Noordwijkerhout (NL), December 16-17, 2002. IPV, NIMR.
wap20021216b Jeroen Olde Benneker, Laser welding of steel: industrial applications, NIMR Congress (poster), Noordwijkerhout (NL), December 16-17, 2002. NIMR.
wap20021216c S. Postma, Penetration Control in Laser Welding, NIMR Congress (poster), Noordwijkerhout (NL), December 16-17, 2002. EM, NIMR.
wap20021216d Roberta Vassallo, Impact Resistant Layers by Laser Cladding, NIMR Congress (poster), Noordwijkerhout (NL), December 16-17, 2002. IPV, NIMR.
wap20021216e Rob Waiboer, Realistic Robot Simulation for Laser Welding, NIMR Congress (poster), Noordwijkerhout (NL), December 16-17, 2002. EM, NIMR.
wap20021216f D.F. de Lange, Unsteady Meltpool and Keyhole Modelling for Laser Welding, NIMR congress, Noordwijkerhout, December, 16, 2002. IPV, NIMR.
wap20021217 S. Postma, Weld pool control in laser welding, NIMR congress, Noordwijkerhout, December, 17, 2002. EM, NIMR.
wap20030122 D.F. de Lange, Simulation and Observation of Laser Keyhole Welding, Workshop meeting M4PL16, Igls, Austria, January, 22-23, 2003. NIMR, IPV, EM.
wap20030512 J. Olde Benneker, Laser applications in automotive, Kring Materiaalbewerking met lasers (BvM), Corus PAC, IJmuiden, May, 15, 2003. NIMR.
wap20030625 J. Olde Benneker, Laser welding sources, Syntens workshop, Corus PAC, IJmuiden, June, 25, 2003. NIMR.
wap20030922a M.W. de Graaf, R.G.K.M. Aarts, J. Meijer, Sensor-guided robotic laser welding, IPV workshop (poster), Boxmeer (NL), September 22, 2003. EM, IPV.
wap20030922b D. Iakovou, R. Aarts and J. Meijer, Integrated Processing Head for Robotic Laser Welding, IPV workshop (poster), Boxmeer (NL), September 22, 2003. IPV.
wap20030922c M. Lentjes, D. Klomp, K. Dickmann, Sensor concept for controlled laser cleaning via photodiode, IPV workshop (presentation and poster), Boxmeer (NL), September 22, 2003. IPV.
wap20031023 S. Postma, Weld Pool Control in Nd:YAG Laser Welding, 90-77172-05-X, University of Twente, October, 23, 2003. NIMR, EM. See also: http://doc.utwente.nl/41461/.
wap20031030a A. Schoonderbeek, Laserboren met een high power excimeer laser, 19e bijeenkomst van de Kring Materiaalbewerking met Lasers, University of Twente, October, 30, 2003. IPV.
wap20031030b D.F. de Lange, Laatste theoretische inzichten bij keyholevorming, 19e bijeenkomst van de Kring Materiaalbewerking met Lasers, University of Twente, October, 30, 2003. EM, NIMR, IPV.
wap20031110 D.F. de Lange, Modeling of Laser Welding with FEMLAB, Femlab users seminar, University of Twente, November, 10, 2003. EM, NIMR, IPV.
wap20031124a M.W. de Graaf, R.G.K.M. Aarts, J.B. Jonker, Modeling the seam-teaching process for robotic laser welding, EM symposium (poster), Kerkrade (NL), November 24-25, 2003. EM, IPV.
wap20031124b B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, Twin Spot Laser Welding of Aluminum, EM symposium (poster), Kerkrade (NL), November 24-25, 2003. EM, NIMR.
wap20031124c H. Super, J. van Dijk and J.B. Jonker, Hybrid Isolation of Structure Borne Sound - Reduction on performance sensors, EM symposium (poster), Kerkrade (NL), November 24-25, 2003. EM.
wap20031124d R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Robot Modelling, Identification and Simulation, EM symposium (poster), Kerkrade (NL), November 24-25, 2003. EM, NIMR.
wap20031124e R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Parameter Optimisation Techniques for Robot Identification and Realistic Dynamic Simulation, EM symposium, Kerkrade (NL), November 24-25, 2003. EM, NIMR.
wap20031125 J. Olde Benneker, Hybride laserlassen, Nederlands Instituut voor Lastechniek, November, 24-25, 2003. NIMR.
wap20031209a R.R. Waiboer, Off-line programming for robotised laser welding, NIMR congress, Noordwijkerhout, December, 8-9, 2003. EM, NIMR.
wap20031209b J. Olde Benneker, Laser welding of steel: industrial applications: Corus Case, NIMR Congress (poster), Noordwijkerhout, December, 8-9, 2003. IPV, NIMR.
wap20031209c R.R. Waiboer, R.G.K.M. Aarts and J.B. Jonker, Robot Modelling, Identification and Simulation, NIMR Congress (poster), Noordwijkerhout, December, 8-9, 2003. EM, NIMR.
wap20031209d D.F. de Lange, Meltpool flow aspects of laser keyhole welding, NIMR Congress (poster), Noordwijkerhout, December, 8-9, 2003. IPV, NIMR.
wap20031209e B.J. Aalderink, R.G.K.M. Aarts and J.B. Jonker, Nd:YAG Twin Spot Laser Welding of Aluminum, NIMR Congress (poster), Noordwijkerhout, December, 8-9, 2003. EM, NIMR.
wap20031209f T. Hardeman, R.G.K.M. Aarts and J.B. Jonker, Improved laser beam manipulation control, NIMR Congress (poster), Noordwijkerhout, December, 8-9, 2003. EM, NIMR.
wap20031212 D.F. de Lange, Modelling of Laser Material Interactions, Symposium, Eindhoven, December, 12, 2003. NIMR, IPV, EM.
wap20040122 D.F. de Lange, Meltpool Flow Aspects with Simple Keyhole Models, Workshop meeting M4PL17, Igls, Austria, January, 22-24, 2004. IPV, NIMR, EM.
wap20040416 M. Lentjes, K. Dickmann, J. Meijer, Controlled laser cleaning by laser induced plasma emission analysis via photodiode or low lambda resolution spectrometer, Culture 2000, Advanced on site laboratory for European antique heritage restoration, Constanta, Romania, April, 16, 2004. IPV.
wap20040921a M. de Graaf, R.G.K.M. Aarts, J. Meijer, Sensor-guided robotic laser welding, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV, EM.
wap20040921b M. Groenendijk, Self cleaning surfaces by ultrafast pulsed laser micromachining, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV.
wap20040921c J.T. Hofman, Automation of the Laser Cladding Process, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV, NIMR.
wap20040921d D. Iakovou, R. Aarts and J. Meijer, Seam tracking process of an integrated laser welding head, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV.
wap20040921e N. Karlitskaya, Laser die transfer: study of laser die release by Q-switched Nd;YAG laser, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV.
wap20040921f J. van Vaerenbergh, Process optimization in selective laser melting, IPV workshop (poster), Boxmeer (NL), September 21, 2004. IPV.
wap20040929 M. Lentjes, K. Dickmann, J. Meijer, Prozessüberwachung beim Laserreinigen und Laserschichtabtrag durch Anwendung der Plasmaanalyse mittels "Low resolution" Spektrometer, 2nd Remagener Physiktage, Medizintechnik und Lasertechnik, Remagen, Germany, September, 29, 2004. IPV.
wap20041116 J. Olde Benneker, Laser welding applications, FDP regional meeting, University of Twente, Enschede, the Netherlands, November, 16, 2004. NIMR.
wap20041118 J. Olde Benneker, Laser welding applications, FDP regional meeting, NedCar, Born, the Netherlands, November, 18, 2004. NIMR.
wap20041122a B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, The Aluminum laser welding process: A closer look at the optical emissions, EM symposium (poster), Kerkrade (NL), November 22-23, 2004. EM, NIMR.
wap20041122b W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved laser beam manipulation by learning, EM symposium (poster), Kerkrade (NL), November 22-23, 2004. EM, NIMR.
wap20041122c T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, Robot modelling for laser beam manipulation control, EM symposium (poster), Kerkrade (NL), November 22-23, 2004. EM, NIMR.
wap20041122d H. Super, G. Nijsse, J. van Dijk, J.B. Jonker, Hybrid isolation of structure borne sound: Broadband vibration isolation experiments with fixed-gain feedforward control, EM symposium (poster), Kerkrade (NL), November 22-23, 2004. EM.
wap20041220a J.T. Hofman, J. Meijer, Application of impact resistant layers on low alloyed and mild steel by laser surface modification, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. IPV, NIMR.
wap20041220b B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Visualizing the laser welding process of aluminium, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. EM, NIMR.
wap20041220c W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tracking for robotised laser welding using iterative learning control, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. EM, NIMR.
wap20041220d T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, Robot modelling for laser beam manipulation, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. EM, NIMR.
wap20041220e D.F. de Lange, Melt ejection during laser drilling, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. EM, NIMR.
wap20041220f J. Olde Benneker, Bridging research to the application: Corus case, NIMR Congress (poster), Noordwijkerhout, December, 20-21, 2004. EM, NIMR.
wap20041221 D.F. de Lange, Modelling of Laser Processing, NIMR congress, Noordwijkerhout, December, 20-21, 2004. EM, NIMR, IPV.
wap20050119 D.F. de Lange, Modelling of Free Surface Movement in Laser Drilling, Workshop meeting M4PL18, Igls, Austria, January, 19-21, 2005. NIMR, Impact, IPV, EM.
wap20050121 Aart Schoonderbeek, Laser Drilling of Metals with a XeCl Excimer Laser, 90-365-2126-2, University of Twente, January, 21, 2005. Impact, IPV. See also: http://purl.org/utwente/48273.
wap20050223 D.F. de Lange, Modelling of material processing with laser, Meeting at CORUS, Beverwijk, the Netherlands, February 23, 2005. NIMR, Impact, IPV, EM.
wap20050224 D.F. de Lange, High Power Laser Drilling, Kring Materiaalbewerking met lasers (BvM), ECN, Petten, January, 24, 2005. NIMR, Impact, IPV, EM.
wap20050303 D.F. de Lange, Simulation of Material Processing with Laser, Symposium in the honor of G.J. de Bruin, Universiteit Twente, Enschede, March, 3, 2005. NIMR, Impact, IPV, EM.
wap20050426 J. Meijer, Overview / Laser state-of-the-art, Benelux Laser Event, Mol, Belgium, April 26, 2005. NIMR, Impact, IPV.
wap20050531 J. Olde Benneker, Gerobotiseerd laserlassen, Metaalunie / LAC clustermeeting, University of Twente, Enschede, the Netherlands, May, 31, 2005. NIMR.
wap20050622a M. de Graaf, Sensor-guided robotic laser welding, Kring Materiaalbewerking met lasers (BvM), AWL, Harderwijk, June 22, 2005. Impact, IPV, EM, DISC.
wap20050622b D.F. de Lange, Invloed van vervuiling en inbranding van optische componenten, Kring Materiaalbewerking met lasers (BvM), AWL, Harderwijk, June 22, 2005. NIMR, Impact, IPV, EM.
wap20050908 H.M.J.R. Soemers, Mechatronic design and micro systems, DCMM Symposium, TU Delft (NL), September 8, 2005. Impact, DISC.
wap20050921 J. Olde Benneker, Introduction course laser welding, FDP, Metaalunie/LAC, University of Twente, Enschede, the Netherlands, September, 21, 22, 28, 29, 30; November, 2, 3, 2005. NIMR.
wap20050929 H.M.J.R. Soemers, Mechatronics and precision micro systems, IOP Precisie - Voorbij de horizon - Symposium, Groenekan (Utrecht, NL), September 29, 2005. Impact, DISC.
wap20051019 J. Van Vaerenbergh, Benchmarking of SLS/SLM processes, International IMS Rapid Prototyping Network workshop 'Rapid Product Development', Stuttgart, Germany, October, 19, 2005. Impact, IPV.
wap20051029 B. Vandenbroucke, J.P. Kruth, J. Van Vaerenbergh, I. Naert, Manufacturing implant supported frameworks by means of SLS/SLM, No pages in Scientific session of the American College of Prosthodontists: Prosthodontics: The new Horizons (No ISBN or ISSN) Los Angeles, USA, October, 29, 2005. Impact, IPV.
wap2005105 H.M.J.R. Soemers, Hoe maak je het concurrerend?, Nationale Micro Nano Conferentie, Wageningen (NL), October 5, 2005. Impact, DISC.
wap20051107 J. Olde Benneker, Laserlassen van kleine series producten, Metaalunie / LAC / Syntens meeting, University of Twente, Enschede, the Netherlands, November, 7, 2005. NIMR.
wap20051108 D.F. de Lange, Manufacturing with Laser, Semana de Ingenieria, Universidad del Valle de Mexico, Querétaro, Mexico, November, 8, 2005. NIMR, Impact, IPV, EM.
wap20051109 D.F. de Lange, Maquinando con Laser, Centro de Fisica Aplicada y Tecnologia Avanzada, UNAM, Querétaro, Mexico, November, 9, 2005. NIMR, Impact, IPV, EM.
wap20051121a B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Shedding Light on Laser Welding, EM symposium (poster), Lunteren (NL), November 21-22, 2005. NIMR, Impact, EM. See also: http://purl.org/utwente/55453.
wap20051121c Menno de Graaf, Ronald Aarts, Ben Jonker, Real-time trajectory generation for sensor-guided robotic laser welding, EM symposium (poster), Lunteren (NL), November 21-22, 2005. Impact, IPV, EM, DISC. See also: http://purl.org/utwente/55454.
wap20051121d W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tip tracking for an industrial robot using Iterative Learning Control, EM symposium (poster), Lunteren (NL), November 21-22, 2005. NIMR, Impact, EM, DISC. See also: http://purl.org/utwente/55455.
wap20051121e T. Hardeman, R.G.K.M. Aarts and J.B. Jonker, Multivariable Frequency Response Functions Estimation for Industrial Robots, EM symposium (poster), Lunteren (NL), November 21-22, 2005. NIMR, Impact, EM, DISC. See also: http://purl.org/utwente/55456.
wap20051122 D.F. de Lange, Modelling of a Free Surface for Material Processing with Laser, EM symposium (presentation), Lunteren (NL), November 21-22, 2005. NIMR, Impact, IPV, EM.
wap20051130 H.M.J.R. Soemers, Frame structures of precision systems, Precisiebeurs, Veldhoven (NL), November 30, 2005. Impact, DISC.
wap20051212a J.T. Hofman, Application of impact resistant layers on low alloyed and mild steel by laser surface modification, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, IPV.
wap20051212b B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Illuminating laser welding, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, EM.
wap20051212c W.B.J. Hakvoort, R.G.K.M. Aarts and J.B. Jonker, Improved tool tracking accuracy for robotised laser welding using Iterative Learning Control, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, EM, DISC.
wap20051212d T. Hardeman, R.G.K.M. Aarts and J.B. Jonker, Multivariable Frequency Response Functions Estimation for Industrial Laser Welding Robots, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, EM, DISC.
wap20051212e D.F. de Lange, Modelling of the Laser Cladding Process, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, IPV, EM.
wap20051212f B.J. Aalderink, J. Caanen, J. Veenstra, C. Goos, J. Olde Benneker, Gap-bridging capabilities of different laser welding techniques for AA5182, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, EM.
wap20051212g J. Olde Benneker, Advanced laser welding technologies for AA6082, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR.
wap20051212h J. Olde Benneker, Laser welding of C55 to AISI 3XX, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR.
wap20051212i J. Olde Benneker, Angular distortion and buckling deformation in welded plate structures, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR.
wap20051212j J. Olde Benneker, Introduction course laser welding, NIMR congress, Noordwijkerhout, December, 12-13, 2005. NIMR.
wap20051213 B.J. Aalderink, Illuminating laser welding, NIMR congress (presentation), Noordwijkerhout, December, 12-13, 2005. NIMR, Impact, EM.
wap20061026a T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, Modelling and Identification of Industrial Robots, EM symposium (presentation), Lunteren (NL), October 26-27, 2006. NIMR, Impact, EM, DISC.
wap20061026b W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tip tracking for an industrial robot using Iterative Learning Control, EM symposium (poster), Lunteren (NL), October 26-27, 2006. NIMR, Impact, EM, DISC.
wap20061026c T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, A scanning mirror for robotic laser welding, EM symposium (poster), Lunteren (NL), October 26-27, 2006. NIMR, Impact, EM, DISC.
wap20061026d G.W. van der Poel, J. van Dijk, J.B. Jonker and H.M.J.R. Soemers, Design of a smart mount for vibration isolation in precision equipment, EM symposium (poster), Lunteren (NL), October 26-27, 2006. Impact, EM, DISC.
wap20061211a T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, A scanning mirror system for improved seam tracking during robotic laser welding, NIMR congress (presentation), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, EM, DISC.
wap20061211b J.T. Hofman, J. Meijer, Application of impact resistant layers on low alloyed and mild steel by laser surface modification, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, IPV.
wap20061211c B.J. Aalderink, R.G.K.M. Aarts, J.B. Jonker, J. Meijer, Bridging gaps in laser welding, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, EM.
wap20061211d W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tracking for robotized laser welding using Iterative Learning Control, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, EM, DISC.
wap20061211e T. Hardeman, R.G.K.M. Aarts, J.B. Jonker, A scanning mirror for robotic laser welding, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, EM, DISC.
wap20061211f J. van Tienhoven, Design of hydroformed parts for laser welding, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, IPV.
wap20061211g J. Olde Benneker, E. Meijers, E.M. van der Aa, J. Broekhujsen, Angular distortion and buckling deformation in welded plate structures, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR.
wap20061211h J. Olde Benneker, J. Caanen, B.J. Aalderink, C. Goos, Implementation process observation system for laser welding, NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR, Impact, EM.
wap20061211i J. Olde Benneker, A. Konter, Cooperation Knowledge Transfer Laser welding "Laser agenda 2012", NIMR congress (poster), Noordwijkerhout, December, 11-12, 2006. NIMR.
wap20070112 M. Groenendijk, Twents laser maakt oppervlakken waterafstotend, Volkskrant (No ISSN) (2007). Impact, IPV, EM.
wap20070130 M. Groenendijk, Self-cleaning plastic modeled on leaf, Discovery News (No ISSN) (2007). Impact, IPV, EM.
wap20070206 G.W. van der Poel, J. van Dijk, J.B. Jonker, H.M.J.R. Soemers, Improving the vibration isolation performance of hard mounts, PACT2007 (poster), Hilvarenbeek, the Netherlands, February, 6-7, 2007. Impact, EM, DISC.
wap20070227 J. Olde Benneker, Workshop Design for Laserlassen, NIL, Maastricht, February, 27, 2007. NIMR.
wap20070320 J. Olde Benneker, Workshop Design for Laserlassen, NIL, Rotterdam, March, 20, 2007. NIMR.
wap20070401 M. Groenendijk, Lotusplant, Nederlands Tijdschrift voor Natuurkunde (ISSN 0926-4264) 73 (4) pp. 113 (2007). Impact, IPV.
wap20070405 J. Olde Benneker, Workshop Design for Laserlassen, NIL, Apeldoorn, April, 05, 2007. NIMR.
wap20070522 J. Olde Benneker, Workshop Design for Laserlassen, TNO, Eindhoven, May, 22, 2007. NIMR.
wap20070529 J. Olde Benneker, Workshop Design for Laserlassen, University of Twente, Enschede, May, 29, 2007. NIMR.
wap20070605 J. Olde Benneker, Workshop Design for Laserlassen, Technical University of Delft, Delft, June, 05, 2007. NIMR.
wap20070613 J. Olde Benneker, Workshop Design for Laserlassen, TCNN, Groningen, June, 13, 2007. NIMR.
wap20070615 J. van Dijk, Elastische mounts t.b.v. trillingreductie in precisie apparatuur, University of Twente, Enschede, the Netherlands, June, 15, 2007. Impact, EM, DISC.
wap20071011a W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Experimental tuning of Iterative Learning Control, EM symposium (poster), Lunteren (NL), October 11-12, 2007. NIMR, Impact, EM, DISC.
wap20071011b G.W. van der Poel. J. van Dijk, J.B. Jonker and H.M.J.R. Soemers, Deign of a smart mount for vibration isolation in precision equipment, EM symposium (poster), Lunteren (NL), October 11-12, 2007. Impact, EM, DISC.
wap20071210a W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tracking for robotized laser welding by the application of Iterative Learning Control, NIMR congress (presentation), Noordwijkerhout, December, 10-11, 2007. NIMR, Impact, EM, DISC.
wap20071210b W.B.J. Hakvoort, R.G.K.M. Aarts, J.B. Jonker, Improved tracking for robotized laser welding using robust Iterative Learning Control, NIMR congress (poster), Noordwijkerhout, December, 10-11, 2007. NIMR, Impact, EM, DISC.
wap20071217 Paul van Gerven, Menno de Graaf, Ronald Aarts, Twentse lasrobot zet nauwkeurigheidsrecord, Mechatronica Magazine (No ISSN) 1 pp. 2 (2007). Impact, EM. See also: http://www.mechatronicamagazine.nl/nieuws/interviews/bekijk/artikel/twentse-lasrobot-zet-nauwkeurigheidsrecord.html.
wap20080401a Bert Huis in 't Veld, De toekomst van de lasertechnologie, Industrial LaserEvent, Enschede (NL), April, 1, 2008.
wap20080401b Frank Ploegman, Max Groenendijk, Microbewerken met ultrakort gepulste lasers, Industrial LaserEvent, Enschede (NL), April, 1, 2008.
wap20080401c Ard Hofmeijer,Jeroen Olde Benneker, Opzet van een flexibele laserlascel, Industrial LaserEvent, Enschede (NL), April, 1, 2008. M2i.
wap20080401d Jelmer Brugman, Jonathan Hofman, Toepassing van lasercladden, Industrial LaserEvent, Enschede (NL), April, 1, 2008. M2i.
wap20080403a Max Groenendijk, Bert Huis in 't Veld, Ultrashort pulsed lasers for micromachining, Fotonica Evenement (poster), Nieuwegein (NL), April, 3, 2008. Impact.
wap20080403b Max Groenendijk, Fabrication of Ultra Hydrophobic Surfaces by Femtosecond Pulsed Laser Structuring, Fotonica Evenement (poster), Nieuwegein (NL), April, 3, 2008. Impact.
wap20080415a D.M. Brouwer, MEMS-based Micro Mechatronics, T-Valley Symposium, University of Twente, Enschede, the Netherlands, April, 15, 2008. Impact, EM.
wap20080415b W.B.J. Hakvoort, Verbeterde volgnauwkeurigheid voor een industriële robot, T-Valley Symposium, University of Twente, Enschede, the Netherlands, April, 15, 2008. Impact, EM.
wap20080509 Max Groenendijk, Fabrication of Ultra Hydrophobic Surfaces by Femtosecond Pulsed Laser Structuring, International Laser Technology Congress AKL´08, Aachen, May, 7-9, 2008. Impact.
wap20080521a Bert Huis in 't Veld, De toekomst van de lasertechnologie, Benelux Laser Event 2008, VITO Lasercentrum Mol (B), May, 21 and 22, 2008.
wap20080617 J.P. Meijaard, Modelling and simulation of longitudinal tyre behaviour, EUROMECH colloquium 500, Non-smooth problems in vehicle systems dynamics, Kongens, Lyngby, Denmark, June, 17-19, 2008. Impact, EM, DISC.
wap20080826 A.J. Huis in 't Veld, Developments in laser micromachining, 58th CIRP General Assembly, Manchester, UK, August, 24-30, 2008. M2i, Impact, EM.
wap20080910 J. Olde Benneker, Workshop Design for Laserlassen: case Vogels, Braincenter, Sittard, September, 10, 2008. M2i.
wap20080915 E. Dikmen, P.J.M. van der Hoogt, R.G.K.M. Aarts, Modeling of high speed micro rotors in moderate flow confinement, pp. 1-8 in ISMA 2008 - International Conference on Noise and Vibration Engineering (No ISBN or ISSN) Leuven, Belgium, September 15-17, 2008. EM. See also: http://doc.utwente.nl/79016/.
wap20081006 A.J. Huis in 't Veld, Applied Laser Technology: welding - automation -cladding - micromachining, Congrescentrum "Hoog Brabant" Utrecht, the Netherlands, October, 06, 2008. M2i, Impact, EM.
wap20081015 A.J. Huis in 't Veld, Laser micro- and nanotexturing of 3D surfaces, "Materialica" ENIWEP workshop, München, Germany, October, 15, 2008. M2i, Impact, EM.
wap20081021 A.J. Huis in 't Veld, De laser creëert nog meer kansen, Vraag & Aanbod (No ISSN) 55 (43) pp. 4 (2008). M2i, Impact, EM.
wap20081028 A.J. Huis in 't Veld, Laser microbewerking, KPOT Stichting Kennisplatform Oppervlaktetechnologie, Doorwerth, the Netherlands, October, 28, 2008. M2i, Impact, EM.
wap20081126 D. Tjepkema, V. Hollander, G.W. van der Poel, J. van Dijk, Design of a vibration isolation setup, Precisiebeurs Veldhoven (poster), Veldhoven, November, 26-27, 2008. Impact, EM, DISC.
wap20081217 Paul van Gerven, Wouter Hakvoort, Ronald Aarts, Iteratieve controle doet wonderen voor nauwkeurigheid laserlasrobot, Mechatronica Magazine (No ISSN) 2 (9/10) pp. 26-27 (2008). M2i, Impact, EM, DISC. See also: http://www.mechatronicamagazine.nl/nieuws/opinie/bekijk/artikel/iteratieve-controle-doet-wonderen-voor-nauwkeurigheid-laserlasrobot.html.
wap20090312 Johannes van Dijk, Ronald Aarts, Spacar: Een Fem-tool voor mechatronisch ontwerpen, Hightech Mechatronica 2009, Evoluon, Eindhoven, the Netherlands, March 12, 2009. Impact, EM, DISC. See also: http://www.hightechmechatronica.com/programma/programma-2009/ronald-aarts-en-johannes-van-dijk.html.
wap20090402 J.P. Meijaard, Applications of non-dynamics to motorcycle instability and predictive control in rider feedback, University of Cambridge, Cambridge, UK, April, 2, 2009. Impact, EM, DISC.
wap20091028a S.E. Boer, D.M. Brouwer and R.G.K.M. Aarts, Elastic Hinge for Large Deflection, EM symposium (poster), Lunteren (NL), October 28-29, 2009. Impact, EM.
wap20091113a Emre Dikmen, Peter van der Hoogt, André de Boer, Ronald Aarts, Ben Jonker, Thermal modeling of a mini rotor-stator system, pp. 527-532 in ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009) - Volume 9: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B and C (ISBN 978-0-7918-4382-6) Lake Buena Vista, Florida, USA, November 13-19, 2009. EM. See also: http://purl.utwente.nl/publications/69461. , DOI: 10.1115/IMECE2009-10849.
wap20091113b Emre Dikmen, Peter van der Hoogt, André de Boer, Ronald Aarts, Ben Jonker, A flexible rotor on flexible supports: modeling & experiments, pp. 51-56 in ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE2009) - Volume 15: Sound, Vibration and Design (ISBN 978-0-7918-4388-8) Lake Buena Vista, Florida, USA, November 13-19, 2009. EM. See also: http://purl.utwente.nl/publications/69415. , DOI: 10.1115/IMECE2009-10851.
wap20091207a Valeriy Mitko, Texturing by Ultra Short Laser Pulses, M2i Conference (poster), Noordwijkerhout, December, 7-8, 2009. M2i, Impact.
wap20093112a Volkert van der Wijk, Balancing low mass and low inertia addition, Mikroniek (ISSN 0026-3699) 49 (3) pp. 60-64 (2009).
wap20100330a J. Eichstädt, Topographical characterization of laser texture, Industrial Laser Event 2010, University of Twente, Enschede, the Netherlands, March, 31, 2010. Impact, EM.
wap20100330b A.R. Konuk, Closed loop control of the laser welding process through the measurment of plasma, Industrial Laser Event 2010, University of Twente, Enschede, the Netherlands, March, 30, 2010. Impact, EM, poster.
wap20100504a Emre Dikmen, Peter J. M. van der Hoogt, André de Boer, Ronald G. K. M. Aarts, Influence of Multiphysical Effects on the Dynamics of High Speed Minirotors — Part I: Theory, Journal of Vibration and Acoustics (ISSN 1048-9002) 132 (3) pp. 031010 (9 pages) (2010). EM. See also: http://doc.utwente.nl/73877/. , DOI: 10.1115/1.4000787.
wap20100504b Emre Dikmen, Peter J. M. van der Hoogt, André de Boer, Ronald G. K. M. Aarts, Influence of Multiphysical Effects on the Dynamics of High Speed Minirotors — Part II: Results, Journal of Vibration and Acoustics (ISSN 1048-9002) 132 (3) pp. 031011 (7 pages) (2010). EM. See also: http://doc.utwente.nl/73878/. , DOI: 10.1115/1.4000788.
wap20100519 Ronald Aarts, Nauwkeurige naaddetectie en naadvolgen voor gerobotiseerd laserlassen, Benelux Laser Event 2010, Mol (B), May 18-19, 2010. Impact.
wap20100608 Ronald Aarts, Process Control in laser welding, M2i Workshop Developments in Welding for the 21st Century, Utrecht (NL), June 8, 2010. M2i, Impact.
wap20100627 J. Eichstädt, The opportunities of laser induced periodic surface structures for tribological applications, Gordon Research Conference - Tribology, Waterville, USA, June, 27, 2010. Impact, EM, poster.
wap20101028a S. E. Boer, R.G.K.M. Aarts,J.B. Jonker, D.M. Brouwer, Efficient modelling of a large stroke elastic mechanism using beams and superelements, Thirteenth Engineering Mechanics Symposium, Lunteren, the Netherlands, October, 28, 2010. Impact, EM, poster.
wap20101028b J.P. Meijaard, Modelling of anisotropic beams, Thirteenth Engineering Mechanics Symposium, Lunteren, the Netherlands, October, 28, 2010. Impact, EM, poster.
wap20101213a V.S. Mitko, G.R.B.E. Römer, A.J. Huis in 't Veld, Texturing using ultra short laser pulses, M2i Conference 2010, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 12-13, 2010. M2i, Impact, EM, poster.
wap20101213b J.Z.P. Skolski, Texturing using ultrashort laser pulses, M2i Conference 2010, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 12-13, 2010. M2i.
wap20101231a Vikas Arora, P. J. M. van der Hoogt, R. G. K. M. Aarts, A. de Boer, Identification of dynamic properties of radial air-foil bearings, International Journal of Mechanics and Materials in Design (ISSN 1569-1713) 6 (4) pp. 305-318 (2010). See also: http://doc.utwente.nl/75419/. , DOI: 10.1007/s10999-010-9137-z.
wap20110118 A. Gómes, D. Arnaldo del Cerro, B. Pathiraj, J. Snoeijer, C. Sun, R. Lammerink, A.J. Huis in 't Veld, D. Lohse, Enhancing droplet levitation in hot metallic superhydrophobic surfaces (poster), Physics@FOM, Veldhoven, January, 18-19, 2011.
wap20110405 D. Arnaldo del Cerro, Controlling water by controlling the micrometer scale (poster), Industrial Laser Event 2011, University of Twente, April, 5, 2011.
wap20110519 R.G.K.M. Aarts, D.M. Brouwer, A large stroke planar 2-DOF flexure-based positioning stage, 2e International Symposium on Compliant Mechanisms IFT0MM/ASME CoMe2011, Delft, the Netherlands, May, 19-20, 2011. EM.
wap20110525 D. Arnaldo del Cerro, Superhydrophobic surface textures generated by ultra short laser pulses for anti-ice applications in aviation (poster), Materials Engineering Fair, Eindhoven, May, 25-26, 2011.
wap20110927 R.G.K.M. Aarts, Constraint and dynamic analysis of compliant mechanisms with a flexible multibody modelling approach, Workshop on „Multibody System Dynamics, Robotics and Control“, Johannes Kepler University Linz, Austria, September 26-27, 2011. EM, invited lecture.
wap20111024a S. E. Boer, R.G.K.M. Aarts, J.P. Meijaard, J.B. Jonker, D.M. Brouwer, Modelling Complex-Shaped Flexible Components of an Elastic Manipulator using Two-Node Non-Linear Superelements, Fourteenth Engineering Mechanics Symposium, Lunteren, the Netherlands, October, 24, 2011. EM, poster.
wap20111024b S. E. Boer, R.G.K.M. Aarts, J.P. Meijaard, J.B. Jonker, D.M. Brouwer, A two-node non-linear superelement description for modelling of flexible complex-shaped beam-like components, Fourteenth Engineering Mechanics Symposium, Lunteren, the Netherlands, October, 24, 2011. EM, presentation.
wap20111109 K.G.P. Folkersma, D.M. Brouwer, G.R.B.E. Römer, The integratied UV-RGB laser beam-combiner, Symposium on Photonic Integration, Eindhoven, the Netherlands, November, 11, 2011. (poster).
wap20111130 J.P. Khatait, D.M. Brouwer, R.G.K.M. Aarts,J.L. Herder, Modelling of a flexible instrument and design of a test set-up, Precisiebeurs 2011, Veldhoven, the Netherlands, November, 30-December, 01, 2011.
wap20111212a J. Vincenc Oboňa, V. Ocelík, J. Th. M. De Hosson, J.Z.P. Skolski, G.R.B.E. Römer and A. Huis in ’t Veld, Splashes of molten metal, M2i Conference 2011, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 12, 2011. M2i.
wap20111212b J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in’t Veld, Texturing using Ultrashort Laser Pulses - TULP, M2i Conference 2011, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 12, 2011. M2i.
wap20111212c W. Ya, B. Pathiraj, A.J. Huis in 't Veld, Enhanced reliability of laser cladded industrial products through online feedback process control, M2i Conference 2011, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 12, 2011. M2i.
wap20111231a Vikas Arora, P. J. M. van der Hoogt, R. G. K. M. Aarts, A. de Boer, Identification of stiffness and damping characteristics of axial air-foil bearings, International Journal of Mechanics and Materials in Design (ISSN 1569-1713) 7 (3) pp. 231-243 (2011). See also: http://doc.utwente.nl/77612/. , DOI: 10.1007/s10999-011-9161-7.
wap20120417a Sedao, T.J.-Y. Derrien, G.R.B.E. Römer, B. Pathiraj, A.J. Huis in 't Veld, Direct laser surface nano-patterning, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417b D. Scorticati, J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, M. Workum, M. Theelen, M. Zeman, Thin film surface processing by ultrashort laser pulses, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. M2i, poster.
wap20120417c R. Pohl, G.R.B.E. Römer, Laser Induced Forward Transfer (LIFT), Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417d J. Eichstädt, A.J. Huis in 't Veld, Simulation of energy density profiles for laser-induced surface phenomena, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417e J.Z.P. Skolski, G.R.B.E. Römer, A.J. Huis in 't Veld, Texturing using Ultrashort Laser Pulses (TULP), Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. M2i, poster.
wap20120417f G.R.B.E. Römer, D. Arnaldo del Cerro, R. Pohl, Laser machining for fluidic driven self-alignment, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417g K.G.P. Folkersma, D.M. Brouwer, G.R.B.E. Römer, A.J. Huis in 't Veld, The integrated UV-RGB laser beam-combiner, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417h D. Arnaldo del Cerro, Surface micro-structuring by short laser pulses for microfluidic applications, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. poster.
wap20120417i A.R. Konuk, Process control of laser welding using optical spectroscopy, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. DISC, poster.
wap20120417j Wei Ya, B. Pathiraj, A.J. Huis in 't Veld, Enhanced reliability of laser cladded industrial products through online feedback process control, Industrial Laser Event 2012, University of Twente, Enschede, April, 17, 2012. M2i, poster.
wap20120419 J. Eichstädt, Simulation von Energiedichteprofilen zur Laserstrukturierung kontaktmechanischer Oberflächen, LVBB Brandenburg, LVBB Brandenburg, Germany, April, 19, 2012. invited lecture.
wap20120619 R. Pohl, G.R.B.E. Römer, A.J. Huis in 't Veld, Laser processing in 3D integration of heterogeneous microsystems, Industrial Technologies 2012, Aarhus, DK, June, 19-20, 2012. poster.
wap20121004 J. Eichstädt, Formation of laser-induced periodic surface structures under lateral displacement irradiation conditions, 2nd Symposium on the growth mechanism of LIPSS, Brandenburgische Technische Universität Cottbus, Germany, October, 4, 2012.
wap20121108 J. Eichstädt, The spatial emergence of laser-induced periodic surface structures under lateral displacement irradiation conditions, BAM, Fachbereich 6.4 - Seminar, Berlin, Germany, November, 08, 2012.
wap20121120 K.G.P. Folkersma, D.M. Brouwer, G.R.B.E. Römer, A.J. Huis in 't Veld, Micro laser adjusting for fiber alignment, IOP Photonics Devices & Memphis, genaamd 'Photonics: Key for our future', Burgers' Zoo, Arnhem, the Netherlands, November, 20, 2012.
wap20121210a J. Vincenc Oboňa, G.R.B.E. Römer and A.J. Huis in ’t Veld, Sub-wavelength periodic surface modification of Al2O3 by femtosecond laser pulses, M2i Conference 2012, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 10-11, 2012. M2i.
wap20121210b J. Z. P. Skolski, G. R. B. E. Römer and A. J. Huis in ‘t Veld, Texturing using Ultrashort Laser Pulses (TULP), M2i Conference 2012, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 10-11, 2012. M2i.
wap20121210c W. Ya, B. Pathiraj, A.J. Huis in 't Veld, Enhanced reliability of laser cladded industrial products through online feedback process control, M2i Conference 2012, Materials to innovate Industry and Society, Noordwijkerhout, the Netherlands, December, 10-11, 2012. M2i.
wap20130416a Adriana C. Rodríguez U., Marc Masen, Gert-willem R.B.E. Römer, Texture Design by laser machining for tactile purposes, University of Twente, Enschede, the Netherlands, April, 16, 2013. poster.
wap20130416b J. Z. P. Skolski, G. R. B. E. Römer, A. J. Huis in ‘t Veld, Texturing using ultrashort laser pulses, University of Twente, Enschede, the Netherlands, April, 16, 2013. M2i, poster.
wap20130416c J. Vincenc Oboña, G.R.B.E. Römer and A.J. Huis in ‘t Veld, Femtosecond laser pulse machining of sapphire, University of Twente, Enschede, April, 16, 2013. M2i, poster.
wap20130416d W. Ya, B. Pathiraj, A.J. Huis in 't Veld, Enhanced reliability of laser cladded industrial products through online feedback process control, University of Twente, Enschede, April, 16, 2013. M2i, poster.
wap20130416e R. Pohl, C.W. Visser, G.R.B.E. Römer, C. Sun, A.J. Huis in’t Veld, D. Lohse, Laser-Induced Forward Transfer (LIFT), University of Twente, Enschede, April, 16, 2013. Mesa+, poster.
wap20130416f D. Arnaldo del Cerro, G.R.B.E. Römer, A.J. Huis in ‘t Veld, Micro structuring with picosecond laser pulses, University of Twente, Enschede, April, 16, 2013. poster.
wap20130416g J. Eichstädt, A.J. Huis in ‘t Veld, Irradiation analysis for laser-induced periodic surface structures, University of Twente, Enschede, April, 16, 2013. poster.
wap20130416h K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer, A.J. Huis in ‘t Veld, Laser forming for micro adjustment, University of Twente, Enschede, April, 16, 2013. poster.
wap20130416i A.R. Konuk, Process Monitoring and Control of Laser Welding and Laser Material Deposition, Industrial Laser Event 2013, University of Twente, Enschede, April, 16, 2013. DISC, poster.
wap20130416j D. Scorticati, A. Illiberi, G.R.B.E. Römer, J.Z.P. Skolski, A.J. Huis in ‘t Veld, Optical and electrical properties of SnO2 thin films after ps laser irradiation, University of Twente, Enschede, April, 16, 2013. M2i, poster.
wap20130416k G.H.P. Ebberink, G.R.B.E. Römer, A.J. Huis in 't Veld, Diffractive beam splitters for efficient laser processing, University of Twente, Enschede, April, 16, 2013. poster.
wap20130510a R. Pohl, C.W. Visser, G.R.B.E. Römer, Chao Sun, A.J. Huis in 't Veld, D. Lohse, Laser-induced forward transfer (LIFT), The 2013 IEEE ICRA, Karlsruhe, Germany, May, 10, 2013. poster. See also: http://doc.utwente.nl/85903/.
wap20130510b G.R.B.E. Römer, D. Arnaldo del Cerro, R. Pohl , A.J. Huis in ‘t Veld, Laser generated patterns for fluidic driven self-alignment, Teh 2013 IEEE ICRA, Karlsruhe, Germany, May, 10, 2013. poster.
wap20130601 Emre Dikmen, Peter J. M. van der Hoogt, André de Boer, Ronald G. K. M. Aarts, Ben Jonker, Flow-Induced Instability on High-Speed Mini Rotors in Laminar Flow, Journal of Vibration and Acoustics (ISSN 1048-9002) 135 (2) pp. 024502 (5 pages) (2013). EM. See also: http://doc.utwente.nl/85697/. , DOI: 10.1115/1.4023050.
wap20131209a J. Vincenc Oboňa, G.R.B.E. Römer and A.J. Huis in ’t Veld, Laser Induced Periodic Surface Structures Pulse-analysis-pulse experiment, M2i Conference 2013, Noordwijkerhout, the Netherlands, December, 9-10, 2013. M2i.
wap20131209b J. Z. P. Skolski, G. R. B. E. Römer and A. J. Huis in ‘t Veld, Texturing using Ultrashort Laser Pulses (TULP), M2i Conference 2013, Noordwijkerhout, the Netherlands, December, 9-10, 2013. M2i.
wap20131209c W. Ya, B. Pathiraj, A.J. Huis in 't Veld, Enhanced reliability of laser cladded industrial products through online feedback process control, M2i Conference 2013, Noordwijkerhout, the Netherlands, December, 9-10, 2013. M2i.
wap2013linz R.G.K.M. Aarts, Constraint and dynamic analysis of compliant mechanisms with a flexible multibody modelling approach, pp. 31-43 in Multibody System Dynamics, Robotics and Control, Ed. H. Gattringer and J. Gerstmayr, 978-3-7091-1289-2, Springer-Verlag, Wien, 2013. See also: http://doc.utwente.nl/82868/. , DOI: 10.1007/978-3-7091-1289-2_3.
wap20140122 J.L. Herder, Approach and mechanical design of assistive devices: less is more, Newman Lab, MIT, Boston, MA, USA, January, 22, 2014. invited seminar.
wap20140124 J.L. Herder, Towards statically balanced micromechanisms, Precision Compliant Systems Laboratory, MIT, Boston, MA, USA, January, 24, 2014. guest seminar.
wap20140206 K.G.P. Folkersma, G.R.B.E. Römer, D.M. Brouwer, A.J. Huis in ‘t Veld, High precision laser forming for micro actuation, Spie Photonics West, San Francisco, USA, February, 1-6, 2014. poster. DOI: http://dx.doi.org/10.1117/12.2037675.
wap20140409 J.L. Herder, Towards the essence in medical device design, Design of Medical Devices Conference, Minneapolis, MN, USA, April, 09, 2014. keynote presentation.
wap20140415 J. Vincenc Obona, J. Z. P. Skolski, G. R. B. E. Römer, A.J. Huis in ‘t Veld, Texturing using ultrashort laser pulses, University of Twente, Enschede, the Netherslands, April, 15, 2014. poster.
wap20140514 A. C. Rodríguez Urribarrí, X. Zeng, G.R.B.E. Römer and E. van der Heide, The role of human skin condition on active touch of wood and polymers, 2nd International Conference on BioTribology, ICOBT 2014, Sheraton Centre Toronto, Toronto, Canada, May, 14, 2014. poster.
wap20140602 D.M. Brouwer, Model-based design of precision mechanisms, Micromechanical and Horological Laboratory, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, June, 02, 2014. guest seminar.
wap20140603 J.L. Herder, Looking ahead and thinking big, Fulbright Award Ceremony, Amsterdam, the Netherlands, June, 03, 2014. invited speaker.
wap20141022 J.L. Herder, Forceps with knee-inspired low friction rolling contract joints, DMD-Europe, Delft, the Netherlands, October, 22, 2014. invited presentation.
wap20141029 A.C. Rodriguez Urribarri, The role of skin friction on touch and feel prediction of surface textures, 17th Engineering Mechanics Symposium, Arnhem, the Netherlands, October, 28-29, 2014. EM, poster.
wap20141111 A.J. Huis in 't Veld, Recent results of FDTD modeling of LIPSS, University of Twente, Prague, Czech Republic, November, 11, 2014. opening lecture.
wap20161004 M. Nijenhuis, D.M. Brouwer, Effects of overconstrained design of an elementary flexure hinge, No pages in DSPE Conference on Precision Mechatronics, Ed. DSPE (No ISBN or ISSN) Sint Michielgestel, the Netherlands, October, 4-5, 2016.
wap20161116 M. Nijenhuis, D.M. Brouwer, Overconstrained design - effects of misalignments in an elementary overconstrained elastic mechanism, No pages in Precision Fair (No ISBN or ISSN) Veldhoven, the Netherlands, University of Twente, November 16-17, 2016.